Welcome to the Kiwa global website. Would you like more information about what Kiwa can offer you in the country you are
located? Please select your language.
Navigate through Kiwa's extended landscape of laboratory solutions with our detailed testing directory, embodying the essence of more than 3000 capabilities within 80 laboratories around the globe. Our Laboratory Capabilities directory is a testament to Kiwa's dedication to fostering innovation, enhancing quality, and delivering comprehensive support across a multitude of sectors. Experience the synergy of cutting-edge technology and expert knowledge, as Kiwa paves the way for advancements in safety, quality, and sustainability.
Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds_x000d_ - Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds
Accredited: No
Capability | Description | Standard |
---|---|---|
Appliances having one or more burners with an automatic buner control system | Domestic cooking appliances burning gas-Safety- Appliances having one or more burners with an automatic buner control system |
EN 30-1-4 EN 30-1-4 |
Luminous radiant heaters | Non-domestic gas-fired overhead luminous radiant heaters - Safety_x000d_ - Single burner gas-fired overhead radiant tube heaters for non- domestic use - Rational use of energy |
EN 419-1 EN 419-1 EN 419-2 EN 419-2 |
Air heaters | Non- Domestic direct gas fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
EN 525 EN 525 |
Appliances for heating liquids | Safety of household and similar electrical appliances and particular requirements appliances for heating |
EN IEC 60335-2-15:2003 EN IEC 60335-2-15:2003 |
Appliances having a glass ceramic hotplate | Domestic cooking appliances burning gas - Safety - Appliances having a glass ceramic hotplate |
EN 30-1-3 EN 30-1-3 |
Aquarium luminaires | General requirements and tests of luminaires for aquarium luminaires |
EN IEC 60598-2-11 EN IEC 60598-2-11 |
Assessment of energy consumption | Gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 300 l water storage capacity - Part 2: Assessment of energy consumption |
EN 13203-2 EN 13203-2 |
Assessment of performance of hot water deliveries | Gas-fired domestic appliances producing hot water - Appliances not exceding 70 kW heat input and 300 l water storage capacity - Part 1: Assessment of performance of hot water deliveries |
EN 13203-1 EN 13203-1 |
Ball Pressure Test - Fire hazard testing | This part of IEC 60695 specifies the ball pressure test as a method for evaluating the softening temperature and accelerated material flow under load of polymeric materials and parts of end products in their ability to resist abnormal heat. |
EN 60695-10-2 EN 60695-10-2 |
Barbecues | Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included |
EN 498 EN 498 |
Battery chargers | Safety of household and similar electrical appliances and particular requirements for battery chargers |
EN 60335-2-29:2004 +A1 +A2 EN 60335-2-29:2004 +A1 +A2 |
Bend tests | Destructive tests on welds in metallic materials - Bend tests |
EN ISO 5173 EN ISO 5173 |
Boiling pans | Gas heated catering equipment - Specific requirements - Boiling pans |
EN 203-2-3 EN 203-2-3 |
Brat pans and paëlla cookers | Gas heated catering equipment - Specific requirements - Brat pans and paëlla cookers |
EN 203-2-8 EN 203-2-8 |
Burners | Automatic forced draught burners for gaseous fuels |
EN 676 EN 676 |
Carbon monoxide detector test | Electrical apparatus for the detection of carbon monoxide in domestic premises. Part 1: Test methods and performance requirements |
EN 50291-1 EN 50291-1 |
Chargrills | Gas heated catering equipment - Specific requirements - Chargrills |
EN 203-2-10 EN 203-2-10 |
Clothes dryers and towel rails | Safety of household and similar electrical appliances and particular requirements for clothes dryers and towel rails |
EN IEC 60335-2-43 EN IEC 60335-2-43 |
Commercial dispensing appliances and vending machines | Safety of household and similar electrical appliances and particular requirements for commercial dispensing appliances and vending machines |
EN IEC 60335-2-75:2004 EN IEC 60335-2-75:2004 |
Commercial electric bains-marie | Safety of household and similar electrical appliances and particular requirements for commercial electric bains-marie |
EN IEC 60335-2-50:2003 EN IEC 60335-2-50:2003 |
Commercial electric boling pans | Safety of household and similar electrical appliances and particular requirements for commercial electric boling pans |
EN IEC 60335-2-47:2003 EN IEC 60335-2-47:2003 |
Commercial electric cooking ranges, ovens, hobs and hob elements | Safety of household and similar electrical appliances and particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements |
EN IEC 60335-2-36:2004 EN IEC 60335-2-36:2004 |
Commercial electric forced convection ovens, steam cookers and steam convection ovens | Safety of household and similar electrical appliances and particular requirements for commercial electric forced convection ovens, steam cookers and steam convection ovens |
EN IEC 60335-2-42:2003 EN IEC 60335-2-42:2003 |
Commercial electric griddles and griddle grills | Safety of household and similar electrical appliances and particular requirements for commercial electric griddles and griddle grills |
EN IEC 60335-2-37:2004 EN IEC 60335-2-37:2004 |
Commercial electric griddles and griddle grills | Safety of household and similar electrical appliances and particular requirements for commercial electric griddles and griddle grills |
EN IEC 60335-2-38:2003 EN IEC 60335-2-38:2003 |
Commercial electric hot cupboards | Safety of household and similar electrical appliances and particular requirements for commercial electric hot cupboards |
EN IEC 60335-2-49 EN IEC 60335-2-49 |
Commercial electric kitchen machines | Safety of household and similar electrical appliances and particular requirements for commercial electric kitchen machines |
EN IEC 60335-2-64 EN IEC 60335-2-64 |
Commercial electric multi-purpose cooking pans | Safety of household and similar electrical appliances and particular requirements for commercial electric multi-purpose cooking pans |
EN IEC 60335-2-39:2003 EN IEC 60335-2-39:2003 |
Commercial grillers and toasters | Safety of household and similar electrical appliances and particular requirements for commercial grillers and toasters |
EN IEC 60335-2-48:2003 EN IEC 60335-2-48:2003 |
Convection Heaters | Independed gas fired convection heaters |
EN 613 EN 613 |
Decorative fuel-effect gas appliances | Decorative fuel-effect gas appliances |
EN 509 EN 509 |
Deep fat fryers, frying pans and similar appliances | Safety of household and similar electrical appliances and particular requirements for deep fat fryers, frying pans and similar appliances |
EN 60335-2-13:2010 EN 60335-2-13:2010 |
Degrees of protection provided by enclosures (IP code) (For electrical equipments) | This standard applies to the classification of degrees of protection provided by encloswes for electrical equipment with a rated voltage not exceeding 72.5 kV. |
EN 60529:2013 EN 60529:2013 |
Domestic Cookers | General requirements relating to the domestic cookers for use with liquefied petroleum gases (LPG)_x000d_ &_x000d_ Methods of test for domestic cookers for use with liquefied petroleum gases_x000d_ All Tests can be performed. |
SASO 168 SASO 168 SASO 167 SASO 167 |
Domestic cooking - Rational use of energy | Domestic cooking appliances burning gas - Rational use of energy-General |
EN 30-2-1 EN 30-2-1 |
Domestic cooking appliances burning gas | Domestic cooking appliances burning gas - Safety - General |
EN 30-1-1 EN 30-1-1 |
Electric irons | Safety of household and similar electrical appliances and particular requirements for electric irons |
EN 60335-2-3 EN 60335-2-3 |
Electrical apparatus for the detection of combustible gases in domestic premises | Test methods and performance requirements of electrical apparatus for the detection of combustible gases in domestic premises |
EN 50194-1 EN 50194-1 |
Electrical equipment of machines | Safety of machinery |
EN 60204-1:2006 EN 60204-1:2006 |
Environmental testing - Tests A: Cold | This standards deals with cold tests applicable to both non heat-dissipating and heat-dissipating specimens. For non heat-dissipating specimens, Tests Ab and Ad do not deviate essentially from earlier issues. Test Ae has been added primarily for testing equipment that requires being operational throughout the test, including the conditioning periods. The object of the cold test is limited to the determination of the ability of components, equipment or other articles to be used, transported or stored at low temperature. |
EN 60068-2-1 EN 60068-2-1 |
Environmental testing - Part 1: General and guidance | The IEC 60068 series includes a series of methods for environmental testing along with their appropriate severities, and prescribes various atmospheric conditions for measurements and tests designed to assess the ability of specimens to perform under expected conditions of transportation, storage and all aspects of operational use. |
EN 60068-1 EN 60068-1 |
Environmental testing - Test B: Dry heat | This standard deals with dry heat tests applicable both to heat-dissipating and non heat dissipating specimens. |
EN 60068-2-2 EN 60068-2-2 |
Environmental testing - Test Cab: Damp heat, steady state | Test Cab: Damp heat, steady state |
EN 60068-2-78 EN 60068-2-78 |
Environmental testing - Test Db: Damp heat, cyclic (12 h + 12 h cycle) | To determine of suitability of components, equipment or other articles for use and storage under conditions of high humidity when combined with cyclic temperature changes and, in general, producing under station on the surface of the specimen |
EN 60068-2-30 EN 60068-2-30 |
Extra low-voltage lighting systems for filament lamps | General requirements and tests of luminaires for extra low-voltage lighting systems for filament lamps |
EN 60598-2-23 EN 60598-2-23 |
Fire hazard testing - Glowing/hot-wire based test methods | Glow-wire flammability index (GWFI) test method for materials |
EN IEC 60695-2-12 EN IEC 60695-2-12 |
Fire hazard testing – Glowing/hot-wire based test methods | Glow-wire ignition temperature (GWIT) test method for materials |
EN IEC 60695-2-13 EN IEC 60695-2-13 |
Fire hazard testing – Glowing/hot-wire based test methods | Glow-wire flammability test method for end-products (GWEPT) |
EN IEC 60695-2-11 EN IEC 60695-2-11 |
Fire hazard testing - Needle-flame test method | This part of IEC 60695 specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess by a simulation technique the fire hazard. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials. |
EN IEC 60695-11-5 EN IEC 60695-11-5 |
Fixed general purpose luminaires | General requirements and tests of luminaires for fixed general purpose luminaires |
EN IEC 60598-2-1 EN IEC 60598-2-1 |
Floating Roller Peel Test | Adhesives —_x000d_ Determination of peel_x000d_ resistance of adhesive_x000d_ bonds — Floating roller_x000d_ method |
EN 1464:2010 EN 1464:2010 |
Floodlights | General requirements and tests of luminaires for floodlights |
EN 60598-2-5 EN 60598-2-5 |
Forced convection gas-fired air heaters | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
EN 1020 EN 1020 |
Forced-convection ovens and/or grills | Domestic cooking appliances burning gas - Rational use of energy - Appliances having forced-convection ovens and/or grills |
EN 30-2-2 EN 30-2-2 |
Forced-convection ovens and/or grills | Domestic cooking appliances burning gas - Safety - Appliances having forced-convection ovens and/or grills |
EN 30-1-2 EN 30-1-2 |
Fracture test | Destructive tests on welds in metallic materials - Fracture test |
EN ISO 9017 EN ISO 9017 |
Fryers | Gas heated catering equipment - Specific requirements - Fryers |
EN 203-2-4 EN 203-2-4 |
Gas Fired Catering Equipment | Testing of gas heated catering equipment Part 1 |
SASO GSO EN 203-1 SASO GSO EN 203-1 |
Gas Fired Domestic Cookers | Testing construction and performance characteristics as well as the requirements and methods of test for the safety and marking of domestic cooking appliances, capable of using the combustible gases having one or more enclosed covered burners under a glass ceramic panel |
SASO GSO EN 30-1-3 SASO GSO EN 30-1-3 |
Gas Fired Domestic Cookers | Testing of domestic cooking appliances burning gas having one or more burners with an automatic burner control system |
SASO GSO EN 30-1-4 SASO GSO EN 30-1-4 |
Gas Fired Domestic Cookers | Testing of appliances having forced-convection ovens and/or grills |
SASO GSO EN 30-1-2 SASO GSO EN 30-1-2 |
Gas Fired Domestic Cookers | Requirements and test method for the rational use of energy of gas cooking appliances having forced convection ovens and/or grills using combustible gases |
SASO GSO EN 30-2-2 SASO GSO EN 30-2-2 |
Gas Fired Domestic Cookers | Testing construction and performance characteristics as well as the requirements and methods of test for the safety and marking of freestanding and built-in domestic cooking appliances burning the combustible gases |
SASO GSO EN 30-1-1 SASO GSO EN 30-1-1 |
Gas Fired Domestic Cookers | Requirements and the test method for the rational use of energy of gas burning domestic cooking appliances |
SASO GSO EN 30-2-1 SASO GSO EN 30-2-1 |
Gas heated catering equipment | Gas heated catering equipment - General safety rules |
EN 203-1 EN 203-1 |
Gas Heated Catering Equipment | Gas heated catering equipment - Part 3: Materials and parts in contact with food and other sanitary aspects |
EN 203-3 EN 203-3 |
Gas, oil and solid-fuel burning appliances having electrical connections | Safety of household and similar electrical appliances and particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
EN IEC 60335-2-102:2006 EN IEC 60335-2-102:2006 |
General requirements for basic safety and essential performance of medical electrical equipment | Medical electrical equipment |
EN 60601-1 EN 60601-1 |
Glow-wire apparatus and common test procedure | This part of IEC 60695 specifies the glow-wire apparatus and common test procedure to simulate the effects of thermal stresses which may be produced by heat sources such as glowing elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. |
EN 60695-2-10:2013 EN 60695-2-10:2013 |
Grills, toasters and similar portable cooking appliances | Safety of household and similar electrical appliances and particular requirements for grills, toasters and similar portable cooking appliances |
EN 60335-2-9 EN 60335-2-9 |
Ground recessed luminaires | General requirements and tests of luminaires for ground recessed luminaires |
EN 60598-2-13 EN 60598-2-13 |
Handlamps | General requirements and tests of luminaires for handlamps |
EN 60598-2-8 EN 60598-2-8 |
Hardness testing | Destructive tests on welds in metallic materials - Hardness test on arc welded joints |
EN ISO 9015-1 EN ISO 9015-1 |
Heaters | Single burner gas-fired overhead radiant tube heaters for non-domestic use - Safety_x000d_ - Gas-fired central heating boilers - Assembly comprising a boiler body and a forced draught burner |
EN 416-2 EN 416-2 EN 416-1 EN 416-1 |
Hobs | Methods for measuring performance of household electric cooking appliances |
EN 60350-2 EN 60350-2 |
Hot water heaters for beverage | Gas heated catering equipment - Specific requirements - Hot water heaters for beverage |
EN 203-2-6 EN 203-2-6 |
Household and similar electrical appliances | General requirements relating to household and similar electrical appliances |
EN-IEC 60335-1:2012 EN-IEC 60335-1:2012 |
Impact tests | Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination |
EN ISO 9016 EN ISO 9016 |
Independent hotplates | Specification for dedicated liquified petroleum gas appliances independed hotplates. Including those incorporating a grill for outdoor use |
EN 484 EN 484 |
Instantaneous water heaters | Safety of household and similar electrical appliances and particular requirements for instantaneous water heaters |
EN IEC 60335-2-35:2003 EN IEC 60335-2-35:2003 |
Kitchen machines | Safety of household and similar electrical appliances and particular requirements for kitchen machines |
EN IEC 60335-2-14 EN IEC 60335-2-14 |
Lamp Controlgear | Lamp controlgear - Part 1: General and safety requirements |
EN 61347-1 EN 61347-1 |
Lap Shear Test | Adhesives —_x000d_ Determination of_x000d_ tensile lap-shear_x000d_ strength of bonded_x000d_ assemblies |
EN 1465:2009 EN 1465:2009 |
Liquefied petroleum gas appliances | Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances |
EN 521 EN 521 |
Luminaires | General requirements and tests of luminaires |
EN 60598-1 EN 60598-1 |
Luminaires for road and street lighting | General requirements and tests of luminaires for road and street lighting |
EN IEC 60598-2-3 EN IEC 60598-2-3 |
Luminaires for use in clinical areas of hospitals and health care buildings | General requirements and tests of luminaires for use in clinical areas of hospitals and health care buildings |
EN 60598-2-25 EN 60598-2-25 |
Luminaires with limited surface temperatures | General requirements and tests of luminaires for luminaires with limited surface temperatures |
EN IEC 60598-2-24 EN IEC 60598-2-24 |
Lumineires with built-in transformers for flament lamps | General requirements and tests of luminaires for lumineires with built-in transformers for flament lamps |
EN IEC 60598-2-6 EN IEC 60598-2-6 |
Macroscopic and microscopic examination of welds | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
EN ISO 17639 EN ISO 17639 |
Measurement of low power consumption | Electrical and electronic household and office equipment - Measurement of low power consumption |
EN 50564 EN 50564 |
Measurement of low power consumption | Electrical and electronic household and office equipment - Measurement of low power consumption |
IEC 62301 IEC 62301 |
Measuring method of the energy consumption of gas fired ovens | Measuring method of the energy consumption of gas fired ovens |
EN 15181 EN 15181 |
Metal Chimney Lab. | Thermal performance, gas leakage and condensation, rain water resistance testing of metal chimneys falling under EN 1856-1/-2. |
EN 1859 EN 1859 |
Method for the determination of the proof and the comparative tracking indices of solid insulating materials | This international standard specifies the method of test for the determination of the prof and comparative tracking indices of solid insulating meterials on pieces taken from parts of equipment and on plaques of material using alternating voltages. |
EN IEC 60112 EN IEC 60112 |
MT-Magnetic particle testing | Non-destructive testing of welds - Magnetic particle testing |
EN ISO 17638 EN ISO 17638 |
Multi Purpose Boiling Burners For Outdoor Use | Specification for dedicated liquefied petroleum gas appliances- Multi purpose boiling burners for outdoor use |
EN 497 EN 497 |
Open burners and wok burners | Gas heated catering equipment - Specific requirements - Open burners and wok burners |
EN 203-2-1 EN 203-2-1 |
Outdoor barbecues | Safety of household and similar electrical appliances and particular requirements for outdoor barbecues |
EN IEC 60335-2-78:2003 EN IEC 60335-2-78:2003 |
Ovens | Gas heated catering equipment - Specific requirements - Ovens |
EN 203-2-2 EN 203-2-2 |
Pasta cookers | Gas heated catering equipment - Specific requirements - Pasta cookers |
EN 203-2-11 EN 203-2-11 |
Peel and chisel testing | Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds_x000d_ - Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds |
EN ISO 10447 EN ISO 10447 EN ISO 14270 EN ISO 14270 |
Peel test (adhesively bonded reflective tape) | Peel, ageing, water immersion, salt spray tests and exposure resistances |
WSB-M11P56-A WSB-M11P56-A |
Portable general purpose luminaires | General requirements and tests of luminaires for portable general purpose luminaires |
EN 60598-2-4 EN 60598-2-4 |
Pressure Cookers | Domestic Use Pressure Cooker Safety Testing |
EN 12778 EN 12778 EN 12983-1 EN 12983-1 |
PT-Penetrant testing | Non-destructive testing - Penetrant testing |
EN ISO 3452-1 EN ISO 3452-1 |
Radiant Tube Heater | Multi- Burner gasfired radiant tube heater systems for non- Domestic use- Part 4: System H- Safety |
EN 777-4 EN 777-4 |
Radiant Tube Heater | Multi- Burner gas- Fired overhead radiant tube heater systems for non- Domestic use Part 1: System D- Safety |
EN 777-1 EN 777-1 |
Radiant Tube Heater | Multi- Burner- Gas- Fired overhead radiant tube heather systems for non- domestic use- Part 3: System F- Safety |
EN 777-3 EN 777-3 |
Radiant Tube Heater | Multi burner gas fired overhead radiant tube heather systems for non domestic use- Part 2: System E- Safety |
EN 777-2 EN 777-2 |
Range hoods and other cooking fume extractors | Safety of household and similar electrical appliances and particular requirements for range hoods and other cooking fume extractors |
EN IEC 60335-2-31:2003 EN IEC 60335-2-31:2003 |
Ranges, ovens, steam ovens and grills | Methods for measuring performance of household electric cooking appliances |
EN 60350-1 EN 60350-1 |
Recessed luminaires | General requirements and tests of luminaires for recessed luminaires |
EN IEC 60598-2-2 EN IEC 60598-2-2 |
Refrigerating Appliances, Ice-cream Appliances and Ice-makers | Safety of Household and similar electrical appliances -Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers |
EN 60335-2-24 EN 60335-2-24 |
Room heaters | Safety of household and similar electrical appliances and particular requirements for room heaters |
EN IEC 60335-2-30:2010 EN IEC 60335-2-30:2010 |
Rotating Electrical Machines | Rotating electrical machines -- Part 1: Rating and performance |
EN 60034-1 EN 60034-1 |
RT-Radiographic testing | Non-destructive testing of welds Radiographic testing_x000d_ X-ray techniques with film |
EN ISO 17636-1 EN ISO 17636-1 |
Salamanders and rotisseries | Gas heated catering equipment - Specific requirements - Salamanders and rotisseries |
EN 203-2-7 EN 203-2-7 |
Shavers, hair clippers and similar appliances | Safety of household and similar electrical appliances and particular requirements for shavers, hair clippers and similar |
EN 60335-2-8 EN 60335-2-8 |
Shear testing | Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds |
EN ISO 14273 EN ISO 14273 |
Solid tops, warming plates and griddles | Gas heated catering equipment - Specific requirements - Solid tops, warming plates and griddles |
EN 203-2-9 EN 203-2-9 |
Space Heaters | Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters) |
EN 449 EN 449 |
Space Heaters | Specifications for dedicated liquefied petroleum gas appliances-Flueless non-Domestic space heaters not exeeding 10 kW |
EN 461 EN 461 |
Stationary cooking ranges, hobs, ovens and similar appliances | Safety of household and similar electrical appliances and particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
EN 60335-2-6 EN 60335-2-6 |
Stop time measurement test | Calculation of the necessary safety distance between hazardous point and safety device |
EN ISO 13855 EN ISO 13855 |
Storage water heaters | Safety of household and similar electrical appliances and particular requirements for storage water heaters |
EN IEC 60335-2-21:2003 EN IEC 60335-2-21:2003 |
Structural adhesives | Structural adhesives - Testing of adhesively bonded joints - Bead peel test |
DIN 54457 DIN 54457 |
Tension testing | Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds_x000d_ - Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds |
EN ISO 17653 EN ISO 14272 EN ISO 17653 EN ISO 14272 |
Testing of Boilers | Gas-fired central heating boilers - Part 2-2: Specific standard for type B1 appliances |
EN 15502-2-2 EN 15502-2-2 |
Testing of Boilers | Gas-fired heating boilers - Part 1: General requirements and tests |
EN 15502-1 EN 15502-1 |
Testing of Boilers | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW |
EN 15502-2-1 EN 15502-2-1 |
Testing of Water Heaters | Gas-fired instantaneous water heaters for the production of domestic hot water |
EN 26 EN 26 |
Transverse tensile test | Destructive tests on welds in metallic materials - Transverse tensile test |
EN ISO 4136 EN ISO 4136 |
UT-Ultrasonic testing | Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment |
EN ISO 17640 EN ISO 17640 |
Vacuum cleaners and water-Suction cleaning appliances | Safety of household and similar electrical appliances and particular requirements for vacuum cleaners and water-Suction cleaning appliances |
EN 60335-2-2 EN 60335-2-2 |
VT-Visual testing | Non-destructive testing of welds - Visual testing of fusion-welded joints |
EN ISO 17637 EN ISO 17637 |
Warming plates and similar appliances | Safety of household and similar electrical appliances and particular requirements for warming plates and similar appliances |
EN 60335-2-12 EN 60335-2-12 |
Sulphur as sulphide content
Accredited: Yes
Capability | Description | Standard |
---|---|---|
Aggregate Testing | Acid-soluble materials content |
BS 812:Part 119:1985 Acid-soluble Materials Content |
Aggregate Testing | Water Soluble Sulphate |
EN1744:2012 |
Aggregate Testing | Water soluble chloride |
BS EN1744:2012 |
Aggregate Testing | Particle size distribution - sieving method |
BS EN 933-1:2012 |
Aggregate Testing | Acid Soluble Sulphide |
EN1744:2012 |
Aggregate Testing | Total Sulphur |
EN1744:2012 |
Aggregate Testing | Resistance to fragmentation by the Los Angeles Method |
EN 1097-2:2010 |
Bituminous Mixtures for roads and other paved areas | Maximum Density -procedure B |
BS EN 12697-5:2009 |
Bituminous Mixtures for roads and other paved areas | Air Voids Content |
BS EN 12697-8:2003 |
Bituminous Mixtures for roads and other paved areas | Bulk Density - sealed specimen |
BS EN 12697-6:2012 |
Cast Stone | Capillary absorption |
Documented In-House Method C6:January 2000 based on UKSA Specification for Cast Stone CI/SIB, F13:Ma |
Cast Stone | Capillary absorption |
BS 1217:2005 |
Concrete Testing - Hardened | Sulphur as sulphide content |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Resistivity - Site |
Documented In-House Method ISM ST3:1992 |
Concrete Testing - Hardened | Density |
BS EN 12390-7:2009 |
Concrete Testing - Hardened | Compressive Strength of cubes - including curing |
BS EN 12390-1:2012 BS EN 12390-2:2009 BS EN 12390-3:2009 |
Concrete Testing - Hardened | Sampling for analysis of chlorides - Site |
Documented In-House Method ISM ST2a:1992 |
Concrete Testing - Hardened | Carbonation - Site |
BRE Information Paper IP 6/81 |
Concrete Testing - Hardened | Sulphate content |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Sodium oxide & potassium oxide contents |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Coring - Site |
BS 1881:Part 120:1983 |
Concrete Testing - Hardened | Cement & Aggregate Content |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Presence of High Alumina Cement |
BRE IS 15/74 |
Concrete Testing - Hardened | Chloride content |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Type of aggregate |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Cored specimens - examining and testing in compression |
BS EN 12504-1:2009 |
Concrete Testing - Reinforced | Corrosion potentials of uncoated reinforcing steel in concrete - Site |
ASTM C 876-09 |
Concrete Testing - Reinforced | Location of reinforcement - Site |
BS 1881:Part 204:1988 |
Equivalent CBR% using Plate Bearing Test | Determination of Equivalent CBR using Plate Bearing Test - Site |
DEsign Manual for Roads and Bridges. Volume 7 : Pavement Design and Maintenance. HD 25/94:Foundation |
Geotechnical Investigation and Laboratory Testing of Soil | Water content |
BS EN ISO 17892-1:2014 |
Mortar Testing | Insoluble residue and soluble silica content |
BS 4551:2005 + A2:2013 |
Mortar Testing | Calcium oxide content |
BS 4551:2005 + A2:2013 |
Mortar Testing | Chloride content |
BS 4551:2005 + A2:2013 |
Mortar Testing | Sulphur trioxide content |
BS 4551:2005 + A2:2013 |
Mortars, Screeds and Plasters (Testing) | Insoluble residue and soluble silica content |
BS 4551:Part 2:1998 |
Mortars, Screeds and Plasters (Testing) | Calcium oxide content |
BS 4551:Part 2:1998 |
Mortars, Screeds and Plasters (Testing) | Chloride content |
BS 4551:Part 2:1998 |
Mortars, Screeds and Plasters (Testing) | Sulphur trioxide content |
BS 4551:Part 2:1998 |
Mortars, Screeds and Plasters (Testing) | Rebar continuity - Site |
Documentd In-House Method ISM ST2a:1992 |
Particle Size Distribution (Wet Sieving) | Particle size distribution - dry sieving |
BS 1377:Part 2:1990 |
Road Signs and Lighting Columns | Relative Loss of Section |
Documented In-House Method ST 9:2008 based on The Institution of Lighting Engineers Technical Report |
Salt for spreading on highways for winter maintenance (Testing) | Rapid determination of Sulphate content |
BS 3247:2011 |
Salt for spreading on highways for winter maintenance (Testing) | General determination of Sulphate content |
BS 3247:2011 |
Salt for spreading on highways for winter maintenance (Testing) | Grading |
BS 3247:2011 |
Salt for spreading on highways for winter maintenance (Testing) | Matter insoluble in water |
BS 3247:2011 |
Salt for spreading on highways for winter maintenance (Testing) | Chloride content |
BS 3247:2011 |
Salt for spreading on highways for winter maintenance (Testing) | Moisture content |
BS 3247:2011 |
Soils Testing for civil engineering purposes | Liquid limit - cone penetrometer |
BS 1377:Part 2:1990 |
Soils Testing for civil engineering purposes | Sulphate content of soil and ground water - gravimetric method |
BS 1377:Part 3:1990 |
Soils Testing for civil engineering purposes | Liquid limit - cone penetrometer - one point |
BS 1377:Part 2:1990 |
Soils Testing for civil engineering purposes | Particle size distribution - wet sieving |
BS 1377:Part 2:1990 |
Soils Testing for civil engineering purposes | Dry density/moisture content relationship (4.5kg rammer) |
BS 1377:Part 4:1990 |
Soils Testing for civil engineering purposes | Moisture condition value (MCV) |
BS 1377:Part 4:1990 |
Soils Testing for civil engineering purposes | Moisture content - oven drying method |
BS1377:Part 2:1990 |
Soils Testing for civil engineering purposes | Plastic limit |
BS 1377:Part 2:1990 |
Soils Testing for civil engineering purposes | Dry density/moisture content relationship (vibrating hammer) |
BS 1377:Part 4:1990 |
Soils Testing for civil engineering purposes | Dry density/moisture content relationship (2.5 kg rammer) |
BS 1377:Part 4:1990 |
Soils Testing for civil engineering purposes | Organic matter content |
BS 1377:Part 3:1990 |
Soils Testing for civil engineering purposes | In-situ California Bearing Ratio - Site |
BS 1377: Part 9:1990 |
Soils Testing for civil engineering purposes | In-situ density - core cutter method - Site |
BS 1377: Part 9:1990 |
Soils Testing for civil engineering purposes | Vertical deformation & strength characteristic of soil by Plate Loading Test - Site |
BS 1377: Part 9:1990 |
Soils Testing for civil engineering purposes | Plasticity index and liquidity index |
BS 1377:Part 2:1990 |
Soils Testing for civil engineering purposes | California Bearing Ratio (CBR) |
BS 1377:Part 4:1990 |
Soils Testing for civil engineering purposes | pH value |
BS 1377:Part 3:1990 |
Soils Testing for civil engineering purposes | In-situ density - sand replacement method (large pouring cylinder) - Site |
BS 1377: Part 9:1990 |
Self-supporting double skin metal faced insulating panels – Factory made products – Specifications
Accredited: No
Capability | Description | Standard |
---|---|---|
Adhesion of granules / Brushing test | Flexible sheets for waterproofing – Bitumen sheets for roof waterproofing – Determination of granules adhesion |
EN 12039 |
Air permeability | Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method |
DIN EN 12114 EN 12114 |
Air permeability | Industrial, commercial and garage doors and gates - Air permeability - Test method |
EN 12427 |
Air permeability | Windows and doors - Air permeability - Test method |
EN 1026 |
Air permeability | Curtain walling - Air permeability - Test method |
EN 12153 |
Appearance | Flexible sheets for waterproofing – Determination of visible defects – Part 2: Plastic and rubber sheets for roof waterproofing |
DIN EN 1850-2 EN 1850-2 |
Appearance | Flexible sheets for waterproofing – Determination of visible defects – Part 1: Bitumen sheets for roof waterproofing |
DIN EN 1850-1 EN 1850-1 |
Artificial ageing | Standard Test Method for Water Absorption of Plastics |
ASTM D570 |
Artificial ageing | Wood-based panels - Determination of moisture resistance under cyclic test contitions |
EN 321 |
Artificial ageing | Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps |
EN ISO 4892-2 ISO 4892-2 |
Artificial ageing | Exposure procedure for artificial weathering |
EOTA TR010 |
Artificial ageing | Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roofing – Method of artificial ageing by long term exposure to elevated temperature |
EN 1296 DIN EN 1296 |
Artificial ageing | Exposure procedure for accelerated ageing by heat |
EOTA TR 011 |
Artificial ageing | Exposure procedure for accelerated ageing by hot water |
EOTA TR 012 |
Artificial ageing | Flexible sheets for waterproofing – Plastics and rubber sheets for roof waterproofing – Methods for exposure to liquid chemicals, including water |
DIN EN 1847 EN 1847 |
Artificial ageing | Flexible sheets for waterproofing – Plastic and rubber sheets for roof waterproofing – Method for exposure to bitumen |
DIN EN 1548 EN 1548 |
Artificial ageing | Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water |
DIN EN 1297 EN 1297 |
Artificial ageing | Thermal insulating products for building applications - Determination of freeze-thaw resistance |
DIN EN 12091 EN 12091 |
Ash residue | Plastics – Determination of ash – Part 5: Poly(vinyl chloride), Method A (ash at 850 °C) |
EN ISO 3451-5 |
Bending properties | Wood-based panels - Determination of the modulus of elasticity in bending and bending strength |
EN 310 |
Bending strength | Thermal insulating products for building applications – Determination of bending behaviour |
EN 12089 |
Bitumen coating | Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
EN 15814 |
Coated Fabrics | Standard Test Methods for Coated Fabrics |
ASTM D751 |
Composite Light Weight Panels | Self-supporting composite lightweight panels, Part 1: General |
ETAG 016-1 |
Composite Light Weight Panels | Self-supporting composite lightweight panels, Part 3: Specific aspects relating to self-supporting Composite Lightweight Panels for use in External Walls and Claddings |
ETAG 016-3 |
Composite Light Weight Panels | Self-supporting composite lightweight panels, Part 2: Specific aspects relating to self-supporting Composite Leightweight Panels for use in Roofs |
ETAG 016-2 |
Composite Light Weight Panels | Self-supporting composite lightweight panels, Part 4: Specific aspects relating to self-supporting Composite Lightweight Panels for use in Internal Walls and Ceilings |
ETAG 016-4 |
Compression behaviour | Polymer modified bituminous thick coatings - Resistance to compression |
EN 15815 |
Compression behaviour | Compressive Properties of Rigid Cellular Plastics |
ASTM D1621 |
Compression behaviour | Thermal insulating products for building applications – Determination of compression behaviour |
DIN EN 826 EN 826 |
Compression behaviour | Compressive Properties of Thermal Insulations |
ASTM C165 |
Density | Thermal insulating products for building applications – Determination of the apparent density |
DIN EN 1602 EN 1602 |
Density | Wood-based panels – Determination of density |
EN 323 |
Density | Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids |
EN 1097-3 DIN EN 1097-3 NEN-EN 1097-3 |
Dimensional stability | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature. |
ASTM D1204 |
Dimensional stability | Flexible sheets for waterproofing – Determination of dimensional stability – Part 1: Bitumen sheets for roof waterproofing |
DIN EN 1107-1 EN 1107-1 |
Dimensional stability | Thermal insulating products for building applications – Determination of dimensional stability under constant normal laboratory conditions (23 °C/50% relative humidity) |
DIN EN 1603 EN 1603 |
Dimensional stability | Thermal insulating products for building applications – Determination of dimensional stability under specified temperature and humidity conditions |
DIN EN 1604 EN 1604 |
Dimensional stability | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
EN 318 |
Dimensional stability | Flexible sheets for waterproofing – Determination of dimensional stability – Part 2: Plastic and rubber sheets for roof waterproofing |
DIN EN 1107-2 EN 1107-2 |
Dimensions | Textiles - Test methods for nonwovens - Determination of mass per unit area |
DIN EN 29073-1 ISO 9073-1 |
Dimensions | Flexible sheets for waterproofing – Determination of length, width, straightness and flatness – Part 2: Plastic and rubber sheets for roof waterproofing |
EN 1848-2 DIN EN 1848-2 |
Dimensions | Wood-based panels - Determination of dimensions of test pieces |
EN 325 |
Dimensions | Dimensions and Density of Preformed Block and Board–Type Thermal Insulation |
ASTM C303 |
Dimensions | Thickness and Density of Blanket or Batt Thermal Insulations |
ASTM C167 |
Dimensions | Flexible sheets for waterproofing – Determination of length, width and straightness – Part 1: Bitumen sheets for roof waterproofing |
EN 1848-1 DIN EN 1848-1 |
Dimensions | Polymer modified bituminous thick coatings - Reduction of the thickness of the layer when fully dried |
EN 15819 |
Dimensions | Thermal insulating products for building applications – Determination of thickness |
DIN EN 823 EN 823 |
Dimensions | Flexible sheets for waterproofing – Determination of thickness and mass per unit area – Part 2: Plastic and rubber sheets |
DIN EN 1849-2 EN 1849-2 |
Dimensions | Flexible sheets for waterproofing – Determination of thickness and mass per unit area – Part 1: Bitumen sheets for roof waterproofing |
EN 1849-1 DIN EN 1849-1 |
Dimensions | Thermal insulating products for building applications – Determination of squareness |
DIN EN 824 EN 824 |
Dimensions | Thermal insulating products for building applications - Determination of thickness for floating floor insulating products |
EN 12431 |
Dimensions | Thermal insulating products for building applications – Determination of flatness |
DIN EN 825 EN 825 |
Dimensions | Thermal insulating products for building applications – Determination of length and width. |
DIN EN 822 EN 822 |
ETICS | ETICS with renderings for the use on timber frame buildings |
EAD 040089-00-0404 |
ETICS | External Thermal Insulation Composite Systems (ETICS) with rendering |
ETAG 004 |
ETICS | Kits for External Thermal Insulation Composite System (ETICS) with panels as thermal insulation product ans discontinuous cladding as exterior skin |
EAD 040287-00-0404 |
ETICS | External thermal insulation composite system (ETICS) with rendering on boards based on polystyrene and cement |
EAD 040759-00-0404 |
ETICS | Buitengevelisolatiesystemen met gepleisterde afwerking |
BRL 1328 |
Façade elements | Keramische prefab wand- en gevelelementen |
BRL 1016 |
Façade elements | Kunststof Gevelelementen |
BRL 0703 |
Façade elements | Houten Gevelelementen |
BRL 0801 |
Façade systems | Kit composed by subframe and fixings for fastening cladding and external wall elements |
EAD 090034-00-0404 |
Façade systems | Gevelbekleding met panelen: |
BRL 4101 |
Façade systems | Kits for external wall claddings mechanically fixed |
EAD 090062-00-0404 |
Façade systems | Fabriekmatig vervaardigde thermische isolatie in gevelconstructies |
BRL 1304 |
Façade systems | Veture kits |
ETAG 017 |
Fastening systems | Fastening screws for sandwich panels |
EAD 330047-01-0602 |
Fastening systems | Fastening screws for metal members and sheeting |
EAD 330046-01-0602 |
Fatigue resistance | FIT classification for roofing systems |
CSTB Cahier 2358 |
Fatigue resistance | Determination of the resistance to fatigue movement |
EOTA TR008 |
Fire protective products | Fire protective board, slab and mat products and kits |
EAD 350142-00-1106 |
Fire resistance classification | Fire classification of construction products and building elements – Part 5: Classification using data from external fire exposure to roofs tests |
EN 13501-5 |
Fire resistance extended application | External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187 |
CEN/TS 16459 |
Flexural properties | Plastics – Determination of flexural properties |
DIN EN ISO 178 EN ISO 178 ISO 178 |
Flow resistance | Flexible sheets for waterproofing – Bitumen sheets for roof waterproofing – Determination of flow resistance at elevated temperature |
DIN EN 1109 EN 1110 |
Flow resistance | Polymer modified bituminous thick coatings - Determination of dimensional stability at high temperature |
EN 15818 |
Granulometry | Tests for geometrical properties of aggregates – Part 1: Determination of particle size distribution - Sieving method |
NEN-EN 933-1 BS EN 933-1:2012 DIN EN 933-1:2013-03 EN 933-1 |
Hail resistance | Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Determination of hail resistance |
EN 13583 |
Hemispherical emissivity | Thermal insulation for buildings – Reflective insulation products – Determination of the declared thermal performance, Annex D – Measurement of emissivity using a Thermal Infra-Red apparatus |
EN 16012 |
Impact resistance | Glass in building - Pendulum test - Impact test method and classification for flat glass |
EN 12600 |
Impact resistance | Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Determination of resistance to impact |
DIN EN 12691 EN 12691 |
Impact resistance | Determination of the resistance to dynamic indentation |
EOTA TR006 |
Impact resistance | FIT classification for roofing systems |
CSTB Cahier 2358 |
Impact resistance - hard / soft body | Determination of impact resistance of panels and panel assemblies |
EOTA TR001 |
Impact resistance - soft body | Timber structures - Test methods - Soft body impact test of timber framed walls |
EN 596 |
Inverted Roofs Insulation Kits | Inverted Roofs Insulation Kits, Part 2: Insulation with protective Finish |
ETAG 031-2 |
Inverted Roofs Insulation Kits | Inverted Roofs Insulation Kits, Part 1: General |
ETAG 031-1 |
Joint sealing tape | Joint sealing tape on the basis of a pre-compressed flexible polyurethane foam for sealing around windows and joints in building façades |
EAD 320001-00-0605 |
LARWK | Liquid Applied Roof Waterproofing Kits |
EAD 030350-00-0402 |
LARWK | Liquid Applied Roof Waterproofing on the basis of polysiloxane |
EAD 030019-00-0402 |
LARWK | Liquid Applied Roof Waterproofing Kits - Part 6: Specific stipulations for kits based on polyurethane |
ETAG 005-6 |
LARWK | Liquid Applied Roof Waterproofing Kits - Part 4: Specific stipulations for kits based on flexible unsaturated polyester |
ETAG 005-4 |
LARWK | Liquid Applied Roof Waterproofing Kits - Part 8: Specific stipulations for kits based on water dispersiable polymers |
ETAG 005-8 |
LARWK | Liquid Applied Roof Waterproofing Kits - Part 5: Specific stipulations for kits based on hot applied polymer modified bitumen |
ETAG 005-5 |
LARWK | Liquid Applied Roof Waterproofing Kits - Part 1: General |
ETAG 005-1 |
LARWK | Liquid Applied Roof Waterproofing Kits - Part 7: Specific stipulations for kits based on bitumen emulsions and solutions |
ETAG 005-7 |
LARWK | Liquid Applied Roof Waterproofing Kits - Part 2: Specific stipulations for kits based on polymer modified bitumen emulsions and solutions |
ETAG 005-2 |
LARWK | Liquid Applied Roof Waterproofing Kits - Part 3: Specific stipulations for kits based on glass reinforced resilient unsaturated polyester resin |
ETAG 005-3 |
Loadbearing panels | Prefabricated wood-based loadbearing stressed skin panels |
ETAG 019 EAD 140022-00-0304 |
Long term resistance to distributed static load | Thermal insulating products for building applications – Determination of deformation under specified compressive load and temperature conditions |
DIN EN 1605 EN 1605 |
Long-term resistance to distributed static load | Thermal insulating products for building applications - Determination of compressive creep |
DIN EN 1606 EN 1606 |
Low temperature flexibility | Flexible sheets for waterproofing – Determination of foldability at low temperature – Part 5: Plastic and rubber sheets for roof waterproofing |
DIN EN 495-5 EN 495-5 |
Low temperature flexibility | Flexible sheets for waterproofing – Bitumen sheets for roof waterproofing – Determination of flexibility at low temperature |
EN 1109 |
Low temperature flexibility | Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures |
EN 15813 |
Metal sheets | Thin metal composite sheet |
EAD 210046-00-1201 |
Moisture content | Hygrothermal performance of building materials and products – Determination of moisture content by drying at elevated temperature |
ISO 12570 EN ISO 12570 |
Moisture content | Wood-based panels - Determination of moisture content |
EN 322 |
Moisture equilibrium | Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions |
EN 12429 |
Peel strength | Flexible sheets for waterproofing – Part 1: Bitumen sheets for roof waterproofing – Determination of peel resistance of joints |
DIN EN 12316-1 EN 12316-1 |
Peel strength | Flexible sheets for waterproofing – Determination of peel resistance of joints – Part 2: Plastic and rubber sheets for roof waterproofing |
EN 12316-2 DIN EN 12316-2 |
Plasticizer content in PVC | Plastics – Determination of matter extractable by organic _x000d_ solvents (conventional methods)_x000d_ |
ISO 6427 |
Point load | Thermal insulating products for building applications - Determination of behaviour under point load |
EN 12430 |
Profiled sheets / Corrugated sheets | Fibre-cement profiled sheets and fittings - Product specification and test methods |
DIN EN 494 EN 494 |
Profiled sheets / Corrugated sheets | Daken en gevels met geprofileerde vezelcementplaten |
BRL 1103 |
Profiled sheets / Corrugated sheets | Corrugated bitumen sheets - Product specification and test methods |
EN 534 |
Reaction to fire | Fire classification of construction products and building elements, Part 1: Classification using test data from reaction to fire tests |
EN 13501-1 |
Reaction to fire | Reaction to fire tests – Ignitability of products subjected to direct impingement of flame – Part 2: Single-flame source test |
ISO 11925-2 DIN EN ISO 11925-2 EN ISO 11925-2 |
Reflective insulation products | Thermal insulation products for buildings with radiant heat reflective components |
EAD 040007-00-1201 |
Resistance to axial withdrawal | Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws |
EN 320 |
Resistance to fire | Test method for external fire exposure |
NEN 6063 |
Resistance to fire | Test methods for external fire exposure to roofs, Test 2 – Method with burning brands and wind |
CEN/TS 1187-2 |
Resistance to fire | Test methods for external fire exposure to roofs, test 1 – Method with burning brands |
CEN/TS 1187-1 |
Resistance to rain | Polymer modified bituminous thick coatings - Resistance to rain |
EN 15816 |
Resistance to root penetration | – Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Determination of resistance to root penetration |
DIN EN 13948 EN 13948 |
Resistance to root penetration | Geosynthetic barriers – Test method for determining the resistance to roots |
DIN CEN/TS 14416 CEN/TS 14416 |
Resistance to root penetration | – Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Determination of resistance to root and rhizome penetration |
FLL Methode |
Resistance to slippage | Determination of the resistance to sliding |
EOTA TR009 |
Resistance to tearing | Flexible sheets for waterproofing – Part 1: Bitumen sheets for roof waterproofing – Determination of resistance to tearing (nail shank) |
DIN EN 12310-1 EN 12310-1 |
Resistance to tearing | Flexible sheets for waterproofing – Determination of resistance to tearing – Part 2: Plastic and rubber sheets for roof waterproofing |
EN 12310-2 DIN EN 12310-2 |
Resistance to water penetration | Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method |
EN 12489 |
Resistance to wind load | Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation_x000d_ |
EN 12444 |
Resistance to wind-driven rain | Hygrothermal performance of buildings - Resistance to wind-driven rain of roof coverings with discontinuously laid small elements - Test methods |
CEN/TR 15601 |
Resistance to wind-driven rain | Hygrothermal performance of building components and building elements - Determination of the resistance of external wall systems to driving rain under pulsating air pressure |
EN 12865 |
Roof, floor, wall and ceiling hatches | Roof, floor, wall and ceiling hatches providing access or for use as an emergency door / with or without fire resistance |
EAD 020011-00-0405 |
Roofing constructions | Houtachtige dakconstructies |
BRL 0101 |
Roofing lights | Daklichten en dakstraten |
BRL 0105 |
Roofing tiles | Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 1: Impermeability test |
EN 539-1 |
Roofing tiles | Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods |
EN 491 |
Roofing tiles | Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications |
EN 490 |
Roofing tiles | Clay roofing tiles for discontinuous laying - Determination of geometric characteristics |
EN 1024 |
Roofing tiles | Corrugated bitumen tiles / sheets |
EAD 030016-00-0402 |
Roofing tiles | Clay roofing tiles for discontinuous laying - Flexural strength test |
EN 538 |
Roofing tiles | Clay roofing tiles and fittings - Product definitions and specifications |
EN 1304 |
Roofing tiles / slates | Fibre-cement slates and fittings - Product specification and test methods |
DIN EN 492 EN 492 |
Roofing tiles / slates | Betonnen dakpannen en hulpstukken |
BRL 4705 |
Roofing tiles / slates | Keramische dakpannen en -hulpstukken |
BRL 1510 |
Roofing tiles / slates | Roofing slates made of polypropylene, limestone and fillers |
EAD 220006-00-0402 |
Sandwich panels | Self-supporting double skin metal faced insulating panels – Factory made products – Specifications |
EN 14509 |
Sandwich panels | Self-supporting double skin metal faced insulating panels – Factory made products – Specifications |
EN 14509 |
Self-supporting lightweight panels | Fibre-cement flat sheets - Product specification and test methods |
DIN EN 12467 EN 12467 |
Self-supporting lightweight panels | Guideline for European Technical Approval of self-supporting composite lightweight panels, Part 4 – Specific aspects relating to self-supporting composite lightweight panels for use in internal walls and ceilings |
ETAG 016 |
Shear strength | Flexible sheets for waterproofing – Determination of shear resistance of joints – Part 2: Plastic and rubber sheets for roof waterproofing |
DIN EN 12317-2 EN 12317-2 |
Shear strength | Thermal insulating products for building applications – Determination of shear behaviour |
DIN EN 12090 EN 12090 |
Shear strength | Flexible sheets for waterproofing – Part 1: Bitumen sheets for roof waterproofing – Determination of shear resistance of joints |
DIN EN 12317-1 EN 12317-1 |
Shingles | Low bitumen mass shingles, laminated or not, with mineral or synthetic reinforcement |
EAD 220020-00-0402 |
Shingles | Bitumen shingles with mineral and/or synthetic reinforcement – Product specification and test methods |
EN 544 |
Solvent content | Paints, varnishes and plastics - Determination of non-volatile matter content |
DIN EN ISO 3251 ISO 3251 EN ISO 3251 |
Static puncture resistance | Determination of the resistance to static indentation |
EOTA TR007 |
Static puncture resistance | FIT classification for roofing systems |
CSTB Cahier 2358 |
Static puncture resistance | Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Determination of resistance to static loading |
En 12730 DIN EN 12730 |
Swelling capacity | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
EN 317 |
Swelling capacity | Rubber, vulcanized or thermoplastic – Determination of the effect of liquids |
ISO 1817 |
Tensile properties | Plastics – Determination of tensile properties – Part 3: Test conditions for films and sheets |
EN ISO 527 DIN EN ISO 527-3 ISO 527 |
Tensile properties | Textiles - Test methods for nonwovens - Determination of tensile strength and elongation |
DIN EN 29073-3 ISO 9073-3 |
Tensile properties | Determination of the resistance to delamination |
EOTA TR004 |
Tensile properties | Thermal insulating products for building applications – Determination of tensile strength parallel to faces |
EN 1608 |
Tensile properties | Flexible sheets for waterproofing – Determination of tensile properties – Part 2: Plastic and rubber sheets for roof waterproofing |
DIN EN 12311-2 EN 12311-2 |
Tensile properties | Flexible sheets for waterproofing – Part 1: Bitumen sheets for roof waterproofing – Determination of tensile properties |
EN 12311-1 DIN EN 12311-1 |
Tensile properties | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
EN 319 |
Tensile properties | Delamination strength - Thermal insulating products for building applications – Determination of tensile strength perpendicular to faces |
EN 1607 DIN EN 1607 |
Thermal insulation | Thermal performance of building materials and products – Determination of thermal resistance by means of guarded hot plate and heat flow meter methods – Products of high and medium thermal resistance |
EN 12667 |
Thermal insulation | Vloer- en perimeterisolatie met isolatieplaten van geëxtrudeerd polystyreenschuim (XPS) |
BRL 1301 |
Thermal insulation | Extruded polystyrene foam boards as load bearing layer and/or thermal insulation outside the waterproofing |
EAD 040650-00-1201 |
Thermal insulation | Thermal insulation products for buildings – In-situ thermal insulation formed from expanded perlite (EP) products – Part 2: Specification for the installed products |
EN 14316-2 |
Thermal insulation | Thermal insulation an/or sound absorbing boards based on expanded polystyrene and cement |
EAD 040065-00-1201 |
Thermal insulation | Thermal insulating products for building equipment and industrial installations – In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products – Part 2: Specification for the installed insulation products |
EN 14319-2 |
Thermal insulation | Open cell factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products for building equipment and industrial installations |
EAD 041094-00-1201 |
Thermal insulation | Fiber reinforced silica aerogel thermal insulation |
EAD 040643-00-1201 |
Thermal insulation | Thermal insulation products for building equipment and industrial installations – Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products – Specification |
EN 14308 |
Thermal insulation | Thermal insulating products for building equipment and industrial installations – In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products – Part 1: Specification for the rigid foam dispensed system before installation |
EN 14319-1 |
Thermal insulation | Thermal insulation products for building equipment and industrial installations – Factory made products of expanded polystyrene (EPS) – Specification |
EN 14309 |
Thermal insulation | Het thermisch na-isoleren van spouwmuren met gebonden EPS- / EPLA-schuimparels |
BRL 2121 |
Thermal insulation | Thermal insulating products for buildings - In-situ formed urea-formaldehyde foam products - Part 1: Specification for the foam system before installation |
EN 15100-1 |
Thermal insulation | Platen van fenolschuim (PF) voor thermische isolatie |
BRL 1310 |
Thermal insulation | Insulation made of loose-fill or compound granulated expanded cork |
EAD 040369-00-1201 |
Thermal insulation | Thermal insulation made of loose fill mineral wool |
EAD 040729-00-1201 |
Thermal insulation | Thermal insulation products for buildings – Factory made expanded perlite (EPB) products – Specification |
EN 13169 |
Thermal insulation | In-situ formed loose fill thermal and/or acoustic insulation product made of granulated expanded cork |
EAD 040313-00-1201 |
Thermal insulation | Thermal insulating products for buildings – In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products – Part 1: Specification for the rigid foam dispensed system before installation |
EN 14318-1 |
Thermal insulation | Thermal insulation products for buildings – Factory made cellular glass (CG) products – Specification |
EN 13167 |
Thermal insulation | Thermal insulation products for buildings – In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads – Part 1: Specification for the bonded and loose filled products before installation |
EN 16809-1 |
Thermal insulation | Thermal insulation products for building equipment and industrial installations – Factory made flexible elastomeric foam (FEF) products – Specification |
EN 14304 |
Thermal insulation | Factory-made thermal and/or acoustic insulation products made of vegetable or animal fibres |
EAD 040005-00-1201 |
Thermal insulation | Thermal insulation products for buildings – In-situ formed loose-fill mineral wool (MW) products – Part 1: Specification for the loose-fill products before installation |
EN 14064-1 |
Thermal insulation | In-situ formed loose-fill thermal and/or acoustic insulation material made of animal fibres |
EAD 040456-00-1201 |
Thermal insulation | Thermal insulation products for building equipment and industrial installations – Factory made calcium silicate (CS) products – Specification |
EN 14306 |
Thermal insulation | Het thermisch isoleren met een in situ spraysysteem van polyurethaanschuim |
BRL 1332 |
Thermal insulation | Rigid polyurethane foam (PUR) elements for fastening attachment parts in thermal insulation composite systems |
EAD 040868-00-0404 |
Thermal insulation | Factory-made boards and products formed by moulding of an expanded polylactic acid (E-PLA) for thermal and/ or acoustical insulation |
EAD 040090-00-1201 |
Thermal insulation | Factory-made thermal and acoustic insulations made of polyester fibres |
EAD 040288-00-1201 |
Thermal insulation | Thermal insulation products for buildings – Factory made mineral wool (MW) products – Specification |
EN 13162 |
Thermal insulation | Thermal insulating products for buildings - In-situ formed urea-formaldehyde foam (UF) products - Part 2: Specification for the installed insulation products |
EN 15100-2 |
Thermal insulation | Platen en vormstukken van geëxpandeerd polystyreen (EPS) voor thermische isolatie van systeemvloeren |
BRL 1331 |
Thermal insulation | Thermal insulation products for buildings – In-situ formed expanded clay lightweight aggregate products – Part 2: Specification for the installed products |
EN 14063-2 |
Thermal insulation | Thermal insulation products for buildings – Factory made expanded polystyrene (EPS) products – Specification |
EN 13163 |
Thermal insulation | Thermal insulation products for buildings – Factory made extruded polystyrene foam (XPS) products – Specification |
EN 13164 |
Thermal insulation | Thermal insulation products for buildings – In-situ formed loose-fill mineral wool (MW) products – Part 2: Specification for the installed products |
EN 14064-2 |
Thermal insulation | Omgekeerd daksystemen met isolatieplaten ven geëxtrudeerd polystyreenschuim (XPS) |
BRL 4710 |
Thermal insulation | Cellular glass boards as load bearing layer and thermal insulation outside the waterproofing |
EAD 040777-00-1201 |
Thermal insulation | Thermal insulation products for buildings – In situ formed expanded clay lightweight aggregate products (LWA) – Part 1: Specification for the loose-fill products before installation |
EN 14063-1 |
Thermal insulation | Thermal insulation board made of microporous silica |
EAD 040057-00-1201 |
Thermal insulation | Thermal insulation products of buildings – In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads – Part 2: Specification for the bonded and loose-fill products after installation |
EN 16809-2 |
Thermal insulation | Insulation product made of expanded perlite (EPB) |
EAD 040010-00-1201 |
Thermal insulation | Factory-made insulation on glass fibers’ support loaded with silica amorphous |
EAD 040685-00-1201 |
Thermal insulation | Load-bearing in-situ loose fill thermal and/or acoustic insulating products made of vegetable fibres to be used in floor constructions |
EAD 041125-00-1201 |
Thermal insulation | Thermal insulation and light weight fill products for civil engineering applications – Factory made products of extruded polystyrene foam (XPS) – Specification |
EN 14934 |
Thermal insulation | Boards made of agglomerated natural cork for thermal and acoustic insulation |
EAD 041389-00-1201 |
Thermal insulation | Dakbedekkingsconstructies met afschotlaag van lichtgewicht mortel met EPS |
BRL 4713 |
Thermal insulation | Factory made cellular glass loose fill |
EAD 040394-00-1201 |
Thermal insulation | Thermal insulation products for building equipment and industrial installations – Factory made extruded polystyrene foam (XPS) products – Specification |
EN 14307 |
Thermal insulation | EPS vormstukken voor thermische isolatie van pannendaken |
BRL 4712 |
Thermal insulation | Thermal insulation products for building equipment and industrial installations – Factory made mineral wool (MW) products – Specification |
EN 14303 |
Thermal insulation | Thermal insulation product made of loose fill expanded perlite (EP) |
EAD 040461-00-1201 |
Thermal insulation | Platen, dekens en vormstukken van minerale wol (MW) voor thermische isolatie van systeemvloeren |
BRL 4304 |
Thermal insulation | Thermal insulating products for building equipment and industrial installations – In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products – Part 2: Specification for the installed insulation products |
EN 14320-2 |
Thermal insulation | Thermal insulation products for buildings – Factory made wood wool (WW) products – Specification |
EN 13168 |
Thermal insulation | Thermal insulation for buildings – Reflective insulation products – Determination of the declared thermal performance |
EN 16012 |
Thermal insulation | Thermal insulating products for building equipment and industrial installations – In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products – Part 1: Specification for the rigid foam spray system before installation |
EN 14320-1 |
Thermal insulation | Thermal insulation products for building equipment and industrial installations – Factory made cellular glass (CG) products – Specification |
EN 14305 |
Thermal insulation | Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
ASTM C518 |
Thermal insulation | Thermal insulation products for buildings – Factory made rigid polyurethane foam (PU) products – Specification |
EN 13165 |
Thermal insulation | Thermal insulation products for buildings – In-situ thermal insulation formed from expanded perlite (EP) products – Part 1: Specification for bonded and loose-fill products before installation |
EN 14316-1 |
Thermal insulation | Low lambda composite boards made of mineral wool fibres and aerogel additives |
EAD 040037-00-1201 |
Thermal insulation | Thermal insulation products for building equipment and industrial installations – made polyethylene foam (PEF) products – Specification |
EN 14313 |
Thermal insulation | Thermal insulation and light weight fill products for civil engineering applications – Factory made products of expanded polystyrene (EPS) – Specification |
EN 14933 |
Thermal insulation | Thermal insulation board made of pressed rigid polyurethane foam |
EAD 040419-00-1201 |
Thermal insulation | Factory-made bonded foam to be used as acoustic and thermal insulation |
EAD 040831-00-1201 |
Thermal insulation | Platen en dekens van minerale wol voor thermische isolatie |
BRL 1308 |
Thermal insulation | Platen en vormstukken van geëxpandeerd polystyreen (EPS) voor thermische isolatie |
BRL 1306 |
Thermal insulation | Thermal insulating products for buildings – In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products – Part 2: Specification for the installed insulation products |
EN 14318-2 |
Thermal insulation | Het thermisch isoleren van bestaande spouwmuren met in-situ materialen |
BRL 2110 |
Thermal insulation | Technical guidelines for the assessment of thermal insulation systems intended for supporting waterproof coverings on flat and sloping roofs |
UEAtc MOAT No. 50 |
Thermal insulation | Thermal insulation products for buildings – In-situ thermal insulation formed from exfoliated vermiculite (EV) products – Part 1: Specification for bonded and loose-fill products before installation |
EN 14317-1 |
Thermal insulation | Thermal and/or sound insulation based on bound expanded polystyrene bulk material |
EAD 040635-00-1201 |
Thermal insulation | Thermische dakisolatiesystemen voor platte of hellende daken op een onderconstructie in combinatie met een baanvormig gesloten dakbedekkingssysteem |
BRL 1309 |
Thermal insulation | Vacuum insulation panels (VIP) with factory applied protection layers |
EAD 040011-00-1201 |
Thermal insulation | Thermal insulation for buidlings made of straw bales |
EAD 040146-00-1201 |
Thermal insulation | Thermal insulation board made of mineral material |
EAD 040012-00-1201 |
Thermal insulation | Thermal insulating products for buildings – In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products – Part 2: Specification for the installed insulation products |
EN 14315-2 |
Thermal insulation | Thermal insulation products for building equipment and industrial installations – Factory made phenolic foam (PF) products – Specification |
EN 14314 |
Thermal insulation | Thermal insulation products for buildings – In-situ thermal insulation formed from exfoliated vermiculite (EV) products – Part 2: Specification for the installed products |
EN 14317-2 |
Thermal insulation | In-situ formed loose fill thermal and/or acoustic insulation products made of vegetable fibres |
EAD 040138-01-1201 |
Thermal insulation | Thermal insulation products for buildings – Factory made phenolic foam (PF) products – Specification |
EN 13166 |
Thermal insulation | Thermal insulating products for buildings – In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products – Part 1: Specification for the rigid foam spray system before installation |
EN 14315-1 |
Thermal insulation | Thermal insulation products for building equipment and industrial installations – Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products – Specification |
EN 15501 |
Thermal shock test | Self-supporting double skin metal faced insulating panels – Factory made products – Specifications, Annex B – Durability testing method for sandwich panels, § 7 – Thermal shock test_x000d_ |
EN 14509 |
Thermal shock test | Investigation of sandwich panels and other building systems after exposure to heating with IR radiation, spraying with water and/or freezing to (extreme) low temperatures |
BDA SCUD Test |
Walkability roof insulation boards | Test method to determine whether products have sufficient resistance to withstand forces applied directly to them during installation, application, use or maintenance, caused by pedestrian traffic. |
BDA MarathonMan Test |
Water absorption | Thermal insulating products for building applications – Determination of long-term water absorption by immersion |
EN 12087 DIN EN 12087 |
Water absorption | Thermal insulating products for building applications – Determination _x000d_ of short-term water absorption by partial immersion_x000d_ |
ISO 29767 EN ISO 29767 EN 1609 DIN EN 1609 |
Water absorption | Thermal insulating products for building applications – Determination of long-term water absorption by diffusion |
EN ISO 16536 ISO 16536 EN 12088 |
Water absorption coefficient | Hygrothermal performance of building materials and products – Determination of water absorption coefficient by partial immersion |
DIN EN ISO 15148 EN ISO 15148 |
Water resistance | Polymer modified bituminous thick coatings - Water resistance |
EN 15817 |
Water vapour transmission | Thermal insulating products for building applications – Determination of water vapour transmission properties |
EN 12086 DIN EN 12086 |
Water vapour transmission | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method |
EN ISO 12572 DIN EN ISO 12572 ISO 12572 |
Water vapour transmission | Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Determination of water vapour transmission properties |
DIN EN 1931 EN 1931 |
Waterproofing sheets | Flexible sheets for waterproofing – Definitions and characteristics of underlays – Part 1: Underlays for discontinuous roofing |
DIN EN 13859-1 EN 13859-1 |
Waterproofing sheets | Geosynthetic barriers – Characteristics required for use in the construction of solid waste storage and disposal sites |
EN 13943 DIN EN 13493 |
Waterproofing sheets | Flexible sheets for waterproofing – Reinforced bitumen sheets for roof waterproofing – Definitions and characteristics |
DIN EN 13707 EN 13707 |
Waterproofing sheets | UEAtc Technical Guide for the assessment of non-reinforced, reinforced and/or backed roof waterproofing systems made of FPO |
UEAtc MOAT No. 67 |
Waterproofing sheets | Flexible sheets for waterproofing – Plastic and rubber sheets for roof waterproofing – Definitions and characteristics |
DIN EN 13956 EN 13956 |
Waterproofing sheets | Geosynthetic barriers – Characteristics required for use in the construction of canals |
DIN EN 13362 EN 13362 |
Waterproofing sheets | Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover |
ASTM E154 |
Waterproofing sheets | Geosynthetic barriers – Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures |
DIN EN 13491 EN 13491 |
Waterproofing sheets | Flexible sheets for waterproofing – Bitumen damp proof courses – Definitions and characteristics |
EN 14967 DIN EN 14967 |
Waterproofing sheets | Flexible sheets for waterproofing – Plastic and rubber damp proof courses – Definitions and characteristics |
DIN EN 14909 EN 14909 |
Waterproofing sheets | Flexible sheets for waterproofing – Bitumen damp proof sheets including bitumen basement tanking sheets – Definitions and characteristics |
DIN EN 13969 EN 13969 |
Waterproofing sheets | Baanvormige dakbedekkingssystemen |
BRL 1511 |
Waterproofing sheets | Afdichtingsfolie van lage dichtheid polyetheen, met of zonder versterking |
BRL K546 |
Waterproofing sheets | Flexible sheets for waterproofing – Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet – Definitions and characteristics |
EN 13967 DIN EN 13967 |
Waterproofing sheets | UEAtc Technical Guide for the assessment of non-reinforced, reinforced and/or backed roof waterproofing systems made of PVC |
UEAtc MOAT No. 65 |
Waterproofing sheets | Fully bonded, pre-applied flexible sheet for waterproofing |
EAD 030378-00-0605 |
Waterproofing sheets | Regendichte of waterkerende membranen voor hellende daken en gevels |
BRL 4708 |
Waterproofing sheets | Dampremmende membranen |
BRL 4711 |
Waterproofing sheets | UEAtc Technical Guide for the assessment of Roof Waterproofing Systems made of Reinforced APP or SBS Polymers Modified Bitumen Sheets |
UEAtc MOAT No. 64 |
Waterproofing sheets | Geosynthetic barriers – Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
DIN EN 13492 EN 13942 |
Waterproofing sheets | Afdichtingsfolie van weekgemaakt_x000d_ polyvinylchloride (PVC-P), met of zonder_x000d_ versterking |
BRL K519 |
Waterproofing sheets | Flexible sheets for waterproofing – Plastic and rubber vapour control layers – Definitions and characteristics |
EN 13984 DIN EN 13984 |
Waterproofing sheets | Geosynthetic barriers – Characteristics required for use in the construction of reservoirs and dams |
EN 13361 DIN EN 13361 |
Waterproofing sheets | Flexible sheets for waterproofing – Bitumen water vapour control layers – Definitions and characteristics |
DIN EN 13970 EN 13970 |
Waterproofing sheets | Systems of mechanically fastened flexible roof waterproofing sheets |
EAD 030351-00-0402 |
Waterproofing sheets | Membrane for use as roof underlay |
EAD 030218-00-0402 |
Waterproofing sheets | Guideline for the European Technical Approval of systems of mechanically fastened flexible roof waterproofing membranes |
ETAG 006 |
Waterproofing sheets | UEAtc Technical Guide for the assessment of non-reinforced, reinforced and/or backed roof waterproofing systems made of EPDM |
UEAtc MOAT No. 66 |
Waterproofing sheets | Flexible sheets for waterproofing – Definitions and characteristics of underlays – Part 2: Underlays for walls |
EN 13859-2 DIN EN 13859-2 |
Waterproofing sheets | Afdichtingsfolie van hoge dichtheid polyetheen zonder versterking |
BRL K538 |
Watertight Covering Kits | Watertight Covering Kits for Wet Room floors and or walls, Part 2: Kits based on flexible Sheets |
ETAG 022-2 Version 09/2011 ETAG 022-2 |
Watertight Covering Kits | Watertight Covering Kits for Wet Room floors and or walls, Part 1: Liquid Applied Coverings with or without wearing surface |
ETAG 022-1 Version 08/2007 ETAG 022-1 |
Watertight Covering Kits | Watertight Covering Kits for Wet Room floors and or walls, Part 3: Kits based on inherently watertight Boards |
ETAG 022-3 Version 09/2011 ETAG 022-3 |
Watertightness | Curtain walling - Watertightness - Laboratory test under static pressure |
EN 12155 |
Watertightness | Flexible sheets for waterproofing – Bitumen, plastics and rubber sheets for roof waterproofing – Determination of watertightness |
EN 1928 DIN EN 1928 |
Watertightness | Windows and doors - Water tightness - Test method |
EN 1027 |
Watertightness | Polymer modified bituminous thick coatings - Determination of watertightness |
EN 15820 |
Watertightness | Determination of the watertightness with hydrostatic head of water |
EOTA TR003 |
Watertightness | Flexible sheets for waterproofing - Underlays for discontinuous roofing and walls - Determination of resistance to water penetration |
EN 13111 DIN EN 13111 |
Watertightness after stretching at low temperature | Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Determination of watertightness after stretching at low temperature |
EN 13897 |
Wind uplift resistance façade systems | Guideline for European Technical Approval of kits for external wall claddings – Part 1: Ventilated cladding kits comprising cladding components and associated fixings, and Part 2: Cladding kits comprising cladding components, associated fixings, subframe and possible insulation layer |
ETAG 034 |
Wind uplift resistance façade systems | Guideline for European Technical Approval of venture kits – Prefabricated units for external wall insulation |
ETAG 017 |
Wind uplift resistance façade systems | Guideline for European Technical Approval of external thermal insulation composite systems with rendering |
ETAG 004 |
Wind uplift resistance façade systems | Windows and doors - Resistance to wind load - Test method |
EN 12211 |
Wind uplift resistance façade systems | Curtain walling - Structural wind resistance - Test Method |
EN 12179 |
Wind uplift resistance roofing systems | Determination of the resistance to wind loads of partially bonded roof waterproofing membranes |
EOTA TR005 |
Wind uplift resistance roofing systems | Flexible sheets for waterproofing – Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing |
EN 16002 |
Wind uplift resistance roofing tiles | Determination of the uplift resistance of installed clay or concrete tiles for roofing - Roof system test method |
EN 14437 |
Resistivity - Site
Accredited: Yes
Capability | Description | Standard |
---|---|---|
Aggregate Testing | Acid-soluble materials content |
BS 812:Part 119:1985 Acid-soluble Materials Content |
Aggregate Testing | Water Soluble Sulphate |
EN1744:2012 |
Aggregate Testing | Water soluble chloride |
BS EN1744:2012 |
Aggregate Testing | Particle size distribution - sieving method |
BS EN 933-1:2012 |
Aggregate Testing | Acid Soluble Sulphide |
EN1744:2012 |
Aggregate Testing | Total Sulphur |
EN1744:2012 |
Aggregate Testing | Resistance to fragmentation by the Los Angeles Method |
EN 1097-2:2010 |
Bituminous Mixtures for roads and other paved areas | Maximum Density -procedure B |
BS EN 12697-5:2009 |
Bituminous Mixtures for roads and other paved areas | Air Voids Content |
BS EN 12697-8:2003 |
Bituminous Mixtures for roads and other paved areas | Bulk Density - sealed specimen |
BS EN 12697-6:2012 |
Cast Stone | Capillary absorption |
Documented In-House Method C6:January 2000 based on UKSA Specification for Cast Stone CI/SIB, F13:Ma |
Cast Stone | Capillary absorption |
BS 1217:2005 |
Concrete Testing - Hardened | Sulphur as sulphide content |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Resistivity - Site |
Documented In-House Method ISM ST3:1992 |
Concrete Testing - Hardened | Density |
BS EN 12390-7:2009 |
Concrete Testing - Hardened | Compressive Strength of cubes - including curing |
BS EN 12390-1:2012 BS EN 12390-2:2009 BS EN 12390-3:2009 |
Concrete Testing - Hardened | Sampling for analysis of chlorides - Site |
Documented In-House Method ISM ST2a:1992 |
Concrete Testing - Hardened | Carbonation - Site |
BRE Information Paper IP 6/81 |
Concrete Testing - Hardened | Sulphate content |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Sodium oxide & potassium oxide contents |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Coring - Site |
BS 1881:Part 120:1983 |
Concrete Testing - Hardened | Cement & Aggregate Content |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Presence of High Alumina Cement |
BRE IS 15/74 |
Concrete Testing - Hardened | Chloride content |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Type of aggregate |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Cored specimens - examining and testing in compression |
BS EN 12504-1:2009 |
Concrete Testing - Reinforced | Corrosion potentials of uncoated reinforcing steel in concrete - Site |
ASTM C 876-09 |
Concrete Testing - Reinforced | Location of reinforcement - Site |
BS 1881:Part 204:1988 |
Equivalent CBR% using Plate Bearing Test | Determination of Equivalent CBR using Plate Bearing Test - Site |
DEsign Manual for Roads and Bridges. Volume 7 : Pavement Design and Maintenance. HD 25/94:Foundation |
Geotechnical Investigation and Laboratory Testing of Soil | Water content |
BS EN ISO 17892-1:2014 |
Mortar Testing | Insoluble residue and soluble silica content |
BS 4551:2005 + A2:2013 |
Mortar Testing | Calcium oxide content |
BS 4551:2005 + A2:2013 |
Mortar Testing | Chloride content |
BS 4551:2005 + A2:2013 |
Mortar Testing | Sulphur trioxide content |
BS 4551:2005 + A2:2013 |
Mortars, Screeds and Plasters (Testing) | Insoluble residue and soluble silica content |
BS 4551:Part 2:1998 |
Mortars, Screeds and Plasters (Testing) | Calcium oxide content |
BS 4551:Part 2:1998 |
Mortars, Screeds and Plasters (Testing) | Chloride content |
BS 4551:Part 2:1998 |
Mortars, Screeds and Plasters (Testing) | Sulphur trioxide content |
BS 4551:Part 2:1998 |
Mortars, Screeds and Plasters (Testing) | Rebar continuity - Site |
Documentd In-House Method ISM ST2a:1992 |
Particle Size Distribution (Wet Sieving) | Particle size distribution - dry sieving |
BS 1377:Part 2:1990 |
Road Signs and Lighting Columns | Relative Loss of Section |
Documented In-House Method ST 9:2008 based on The Institution of Lighting Engineers Technical Report |
Salt for spreading on highways for winter maintenance (Testing) | Rapid determination of Sulphate content |
BS 3247:2011 |
Salt for spreading on highways for winter maintenance (Testing) | General determination of Sulphate content |
BS 3247:2011 |
Salt for spreading on highways for winter maintenance (Testing) | Grading |
BS 3247:2011 |
Salt for spreading on highways for winter maintenance (Testing) | Matter insoluble in water |
BS 3247:2011 |
Salt for spreading on highways for winter maintenance (Testing) | Chloride content |
BS 3247:2011 |
Salt for spreading on highways for winter maintenance (Testing) | Moisture content |
BS 3247:2011 |
Soils Testing for civil engineering purposes | Liquid limit - cone penetrometer |
BS 1377:Part 2:1990 |
Soils Testing for civil engineering purposes | Sulphate content of soil and ground water - gravimetric method |
BS 1377:Part 3:1990 |
Soils Testing for civil engineering purposes | Liquid limit - cone penetrometer - one point |
BS 1377:Part 2:1990 |
Soils Testing for civil engineering purposes | Particle size distribution - wet sieving |
BS 1377:Part 2:1990 |
Soils Testing for civil engineering purposes | Dry density/moisture content relationship (4.5kg rammer) |
BS 1377:Part 4:1990 |
Soils Testing for civil engineering purposes | Moisture condition value (MCV) |
BS 1377:Part 4:1990 |
Soils Testing for civil engineering purposes | Moisture content - oven drying method |
BS1377:Part 2:1990 |
Soils Testing for civil engineering purposes | Plastic limit |
BS 1377:Part 2:1990 |
Soils Testing for civil engineering purposes | Dry density/moisture content relationship (vibrating hammer) |
BS 1377:Part 4:1990 |
Soils Testing for civil engineering purposes | Dry density/moisture content relationship (2.5 kg rammer) |
BS 1377:Part 4:1990 |
Soils Testing for civil engineering purposes | Organic matter content |
BS 1377:Part 3:1990 |
Soils Testing for civil engineering purposes | In-situ California Bearing Ratio - Site |
BS 1377: Part 9:1990 |
Soils Testing for civil engineering purposes | In-situ density - core cutter method - Site |
BS 1377: Part 9:1990 |
Soils Testing for civil engineering purposes | Vertical deformation & strength characteristic of soil by Plate Loading Test - Site |
BS 1377: Part 9:1990 |
Soils Testing for civil engineering purposes | Plasticity index and liquidity index |
BS 1377:Part 2:1990 |
Soils Testing for civil engineering purposes | California Bearing Ratio (CBR) |
BS 1377:Part 4:1990 |
Soils Testing for civil engineering purposes | pH value |
BS 1377:Part 3:1990 |
Soils Testing for civil engineering purposes | In-situ density - sand replacement method (large pouring cylinder) - Site |
BS 1377: Part 9:1990 |
Functional testing
Accredited: Yes
Capability | Description | Standard |
---|---|---|
Anti- pollution check valves | Functional and Endurance testing |
EN 13959 |
AS/NZS for Cistern | Functional and Endurance testing |
AS/NZS 1172.2:1999 |
AS/NZS for flexible hoses | Functional testing |
AS/NZS 3499:2006 |
AS/NZS for showers for bathing | Functional and Endurance testing |
AS/NZS 3662:2005 |
AS/NZS for tap ware | Functional and Endurance |
AS/NZS 3718:2005 |
AS/NZS for thermostatic mixing valves | Functional testing |
AS/NZS 4031.1:2005 |
AS/NZS for Vacuum | AS/NZS for Vacuum |
AS/NZS 3494:1997 AS/NZS 3982:1996 |
AS/NZS for Water efficient products | Rating and labeling AS/NZS 6400:2005 Paragraph 3 |
AS/NZS 6400 |
AS/NZS for WC Pans | Functional testing |
AS/NZS 1172.1:2005 |
ATS for Cisterns | Cistern |
ATS 5200:017:2005 |
Automatic shut-off valves PN10 | Functional and Endurance testing |
EN 816 |
Baths for domestic purposes | Functional and Endurance testing |
EN 14516 |
Copper alloy stopvalves for potable water supply in buildings | Functional and Endurance testing |
EN 1213 |
DVGW W534 fitting and piping systems | article 10.28_x000d_ article 12.2_x000d_ article 12.7_x000d_ article 12.8_x000d_ article 12.9 |
W 534 |
DVGW W574 - Sanitary fittings as extraction fittings for drinkingwater Installations - Requirements and tests | functional and endurance tests |
W 574 |
electrodeposited coatings of Ni-Cr | Endurance test |
EN 248 |
Electronic opening and closing sanitary tapware | Functional and Endurance testing |
EN 15091 |
Extractable outlets for sink and basin mixers | Functional and Endurance |
EN 16145 |
Extractable shower hoses for sanitary tapware | Functional and Endurance testing |
EN 16146 |
Fixed firefighting systems | Functional and Endurance testing |
EN 671-1 EN 671-2 |
Flexible hoses | Functional and Endurance testing |
EN 13618 |
flow rate regulators | Functional |
EN 246 |
Inlet valves for flushing cisterns with internal overflow | Functional and Endurance testing |
EN 14124 |
Inline hot water supply tempering valves | Functional and Endurance |
EN 15092 |
Kitchen sinks | Functional and Endurance testing |
EN 13310 |
Low pressure thermostatic mixing valves | Functional and Endurance testing |
EN 1287 |
Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings | Functional and Endurance testing |
EN13828 |
Mechanical mixing valves (PN10) | Functional and Endurance testing |
EN 817 |
Pipe threads | Functional checks |
EN 10226 |
Plumbing Fittings | Watertightness, Dimensions and visual assesment after functional testing |
EN 1254 |
Plumbing supply fittings | ASME/CSA standards for plumbing supply fittings functional and endurance tests |
ASME A112.18.1-2011/ CSA B125.1-11 |
Resistance of joints to pressure cycling | Pressure cycling |
AS/NZS 3499:2005 EN 13618 EN 12295 EN 14124 EN 15091 |
Shower outlets for sanitary tapware | Functional and Endurance testing |
EN 1112 |
Single taps and combination taps | Functional and Endurance testing |
EN 200 |
TCS for checkvalves mechanical properties | TCS for checkvalves mechanical properties |
TCS 1313.4 TCS 1313.7 |
TCS for dimensions | Determination of dimensions |
TCS 2213.16 TCS 2213.13 TCS 5011.1 TCS 2213.14 TCS 5011.3 TCS 2213.4 TCS 2213.19 TCS 5011.7 TCS 5011.6 TCS 2213.11 TCS 5011.5 TCS 2213.7 TCS 2213.10 TCS 5021.3 TCS 5031.3 TCS 3212.2 TCS 2213.5 TCS 5031.2 TCS 2213.12 TCS 2213.1 TCS 2213.3 TCS 2213.15 TCS 3212.1 TCS 2213.8 TCS 2213.18 TCS 5031.1 |
TCS for flowrate | Determination of flowrate |
TCS 1511.4 TCS 1511.5 TCS 1511.2 |
TCS for flushing devices | Corrosion resistance _x000d_ Functional properties/measuring equipment |
TCS 1512.11 TCS 1611.16 TCS 1411.3 TCS 1512.10 TCS 1512.12 TCS 1612.1 |
TCS for functional properties | TCS for functional properties; measuring equipment |
TCS 1511.1 TCS 1711.2 TCS 1512.8 |
TCS for mechanical endurance | Determination of mechanical endurance |
TCS 1211.20 TCS 1211.15 TCS 1211.16 TCS 1211.21 TCS 1211.3 TCS 1211.12 TCS 1211.17 TCS 1211.24 TCS 1211.1 TCS 1211.22 TCS 1211.2 TCS 1211.23 TCS 1212.4 TCS 1211.8 TCS 1211.5 TCS 1211.4 TCS 1211.19 TCS 1211.26 TCS 1212.3 TCS 1211.25 TCS 1211.7 TCS 1212.7 TCS 1211.18 |
TCS for Resistance against deformation | TCS for Resistance against deformation |
TCS 1312.12 TCS 1312.3 TCS 1313.2 TCS 1312.2 TCS 1312.16 TCS 1312.15 TCS 1311.4 TCS 1312.6 TCS 1312.11 TCS 1313.1 TCS 1311.2 TCS 1311.3 TCS 1312.9 TCS 1312.14 TCS 1312.17 TCS 1312.13 TCS 1312.5 TCS 1312.8 TCS 1314.5 |
TCS for resistance against torque | Determination of resistance against torque |
TCS 1315.2 TCS 1315.5 TCS 1315.1 TCS 1315.6 TCS 1315.4 |
TCS for vacuum test | TCS for vacuum test |
TCS 2212.6 TCS 2212.10 TCS 2212.16 TCS 2212.18 TCS 2211.2 TCS 2212.3 TCS 2212.15 TCS 2212.13 TCS 2211.3 TCS 2212.20 TCS 2212.4 TCS 2212.12 TCS 2212.11 TCS 2212.14 TCS 2212.17 TCS 2212.9 TCS 2212.19 TCS 2211.1 |
TCS for visual assesments after functional testing | TCS for visual assesments after functional testing |
TCS 1611.11 TCS 6001.1 TCS 1611.1 TCS 1611.8 TCS 1611.10 TCS 1611.9 TCS 1611.5 TCS 1611.2 TCS 1611.15 TCS 1611.3 TCS 1611.6 TCS 1611.14 |
TCS for watertightness | Determination of watertightness |
TCS 1111.20 TCS 1112.9 TCS 1111.10 TCS 1111.12 TCS 1111.1 TCS 1111.21 TCS 1112.4 TCS 1111.11 TCS 1111.13 TCS 1111.22 TCS 1111.17 TCS 1111.5 TCS 1112.2 TCS 1113.1 TCS 1311.2 TCS 1112.6 TCS 1112.15 TCS 1311.5 TCS 1112.17 TCS 1112.8 TCS 1111.15 TCS 1111.19 TCS 1112.5 TCS 1111.23 TCS 1111.18 TCS 1112.14 TCS 1111.7 TCS 1112.3 TCS 1111.3 TCS 1111.9 TCS 1111.6 TCS 1111.14 TCS 1112.7 TCS 1111.2 TCS 1111.16 TCS 1112.12 TCS 1112.11 TCS 1111.8 TCS 1111.4 TCS 1112.1 |
Thermostatic mixing valves (PN10) | Functional and Endurance tesing |
EN 1111 NHS DO8 |
Valves for watersupply | Functional testing |
EN 1074-3 EN 1074-2 A1 |
Water pressure reducing valves and combination water pressure reducing valves | Functional and Endurance testing |
EN 1567 |
WC and urinal flushing cisterns | Functional and Endurance testing |
EN 14055 |
WC pans and WC suites with integral trap | Functional testing |
EN 997 |
Part 1: General requirements for basic safety and essential performance
Accredited: Yes
Capability | Description | Standard |
---|---|---|
Air-cleaning appliances | Safety |
IEC 60335-2-65:2002+AMD1:2008+AMD2:2015; EN 60335-2-65:2003 + A1:2008 + A11:2012 |
Appliances for heating liquids | Safety |
IEC 60335-2-15:2012+AMD1:2016+AMD2:2018; EN 60335-2-15:2016 + A11:2018 |
Automatic catchweighing instruments. | Part 1: Metrological and technical requirements - Tests |
OIML R 51-1:2006 |
Automatic gravimetric filling instruments | Part 1: Metrological and technical requirements - Tests |
OIML R 61-1:2004 |
Commercial electric bains marie | Safety |
IEC 60335-2-50:2002 / A1:2007 / A2:2017, EN 60335-2-50:2003 / A1:2008 |
Commercial electric boiling pans | Safety |
IEC 60335-2-47:2002 / A1:2008 / A2:2017, EN 60335-2-47:2003 / A1:2008 / A11:2012 |
Commercial electric cooking ranges, ovens, hobs and hob elements | Safety |
EN 60335-2-36:2002 / A1:2004 / A2:2008 / A11:2012, IEC 60335-2-36:2017 |
Commercial electric deep fat fryers | Safety |
EN 60335-2-37:2002 / A1:2008 / A11:2012 / A12:2016, IEC 60335-2-37:2017 |
Commercial electric forced convection ovens, steam cookers and steam-convection ovens | Safety |
IEC 60335-2-42:2002 / A1:2008 / A2:2017, EN 60335-2-42:2003 / A1:2008 / A11:2012 |
Commercial electric griddles and griddle grills | Safety |
IEC 60335-2-38:2002 / A1:2008 / A2:2017, EN 60335-2-38:2003 / A1:2008 |
Commercial electric hot cupboards | Safety |
IEC 60335-2-49:2002 / A1:2008 / A2:2017, EN 60335-2-49:2003 / A1:2008 / A11:2012 |
Commercial electric kitchen machines | Safety |
IEC 60335-2-64:2002+AMD1:2007+AMD2:2017; EN 60335-2-64:2000 + A1:2002 |
Commercial electric multi-purpose cooking pans | Safety |
IEC 60335-2-39:2012 / A1:2017, EN 60335-2-39:2003 / A1:2004 / A2:2008 |
Commercial grillers and toasters | Safety |
IEC 60335-2-48:2002 / A1:2008 / A2:2017, EN 60335-2-48:2003 / A1:2008 / A11:2012 |
Cooking ranges, hobs, ovens and similar appliances | Safety |
IEC 60335-2-6:2014 / A1:2018, EN 60335-2-6:2015 / A1:2020 / A11:2020 |
Deep fat fryers, frying pans and similar appliances | Safety |
IEC 60335-2-13:2009+AMD1:2016; EN 60335-2-13:2010+A11:2012+A1:2019 |
Dynamic measuring systems for liquids other than water | Part 1: Metrological and technical requirements |
OIML R 117-1:2007 |
Electric irons | Safety |
EN 60335-2-3:2016; IEC 60335-2-3:2012+AMD1:2015 |
Electrical equipment for measurement, control and laboratory use | EMC requirements - Part 1: General requirements |
EN 61326-1:2013, IEC 61326-1:2012 |
Electromagnetic compatibility | Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
EN 55014-2:2015, CISPR 14-2:2015 |
Electromagnetic compatibility (EMC) | Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
EN 61000-4-11:2004 /A1:2017, IEC 61000-4-11:2004 /A1:2017, EN IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) | Part 4-5: Testing and measurement techniques - Surge immunity test |
EN 61000-4-5:2014 /A1:2017, IEC 61000-4-5:2014 /A1:2017 |
Electromagnetic compatibility (EMC) | Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
EN 61000-4-4:2012 |
Electromagnetic compatibility (EMC) | Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
EN 61000-4-8:2010 |
Electromagnetic compatibility (EMC) | Part 6-2: Generic standards - Immunity for residential, commercial and light-industrial environments |
EN IEC 61000-6-1:2019 |
Electromagnetic compatibility (EMC) | Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
EN IEC 61000-6-2:2019 |
Electromagnetic compatibility (EMC) | Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
EN 61000-4-2:2009 IEC 61000-4-2:2008 |
Electromagnetic compatibility (EMC) | Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
EN 61000-4-6:2014 /AC:2015, IEC 61000-4-6:2013 /Cor1:2015 |
Equipment for general lighting purposes | EMC immunity requirements |
EN 61547:2009 |
Gas, oil and solid fuel burning appliances having electrical connections | Safety |
IEC 60335-2-102:2017, EN 60335-2-102:2016 |
Grills, toasters and similar portable cooking appliances | Safety |
IEC 60335-2-9:2019; EN 60335-2-9:2003 / A1:2004 /A2:2006 / A12:2007 / A13:2010 |
Household and similar electrical appliances - Safety | Part 1: General requirements |
IEC 60335-1:2010 /COR1:2010 / COR2/2011/ A1:2013 / COR1:2014/ A2:2016 /COR1:2016, EN 60335-1:2012 / |
Humidifiers | Safety |
EN 60335-2-98:2003 + A1:2005 + A2:2008 + A11:2019 |
Kitchen machines | Safety |
IEC 60335-2-14:2016+AMD1:2019; EN 60335-2-14:2006 + A1:2008 + A11:2012 + A12:2016 |
Luminaires | Part 1: General requirements and tests |
EN 60598-1 |
Medical electrical equipment | Part 1: General requirements for basic safety and essential performance |
EN 60601-1:2006 /EC:2010 /A1:2013 /AC:2014 /A12:2014, IEC 60601-1:2005 /A1:2012 |
Medical electrical equipment | Part 1-2: General requirements for basic safety and essential performance –_x000d_ Collateral Standard: Electromagnetic disturbances – Requirements and tests |
EN 60601-1-2:2015, IEC 60601-1-2:2014 |
Railway applications | Electronic equipment used on rolling stock |
EN 50155:2007 /Cor:2010 /AC:2012 EN 50155:2017 |
Safety of machinery – Electrical equipment of machines | Part 1: General requirements |
EN 60204-1:2018 / IEC 60204-1:2016 |
Safety requirements for electrical equipment for measurement, control, and laboratory use | Part 1: General requirements |
EN 61010-1:2010 /A1:2019 / AC2019-04, IEC 61010-1:2010 /A1:2016 |
Warming plates and similar appliances | Safety |
EN 60335-2-12:2003+A1:2008+A2:2019+A11:2019 IEC 60335-2-12:2002+AMD1:2008+AMD2:2017 |
German standard methods for the examination of water, waste water and sludge;_x000d_ Physical and physico-chemical parameters (group C)_x000d_ C10 (Calculation of the calcit saturation of water)_x000d_ anions (group D)_x000d_ D1 (determination of chloride ions)_x000d_ D4 (determination of fluoride)_x000d_ D5 (determination of sulfate ions)_x000d_ D9 (Spectrometric determination of nitrate)_x000d_ D21 (determination of dissolved silicate by spectrometry)_x000d_ D24 (photometric determination of chromium(VI) using 1,5-diphenylcarbonohydrazide)_x000d_ D27 (Determination of sulfide by gas extraction method)_x000d_ cations (group E)_x000d_ E1 (determination of iron)_x000d_ E3 (Determination of calcium and magnesium, complexometric method)_x000d_ E6 (Determination of lead by atomic absorption spectrometry (AAS))_x000d_ E7 (determination of copper by atomic absorption spectrometry (AAS))_x000d_ E8 (Determination of zinc - Method by atomic absorption spectrometry (AAS) using an air-ethine flame)_x000d_ E11 (determination of nickel by atomic absorption spectrometry (AAS))_x000d_ E13 (determination of potassium by atomic absorption spectrometry (AAS) using an air-acetylene flame)_x000d_ E14 (determination of sodium by atomic absorption spectrometry (ASS) using an air-acetylene flame)_x000d_ E26 (determination of thallium by atomic absorption spectrometry (AAS) using electrothermal atomisation)_x000d_ E32 (Determination of iron by atomic absorption spectrometry)_x000d_ _x000d_
Accredited: No
Capability | Description | Standard |
---|---|---|
Accelerated ageing | Testing of rubber |
DIN 53508 |
Determination of liquid water permeability EN 1062-3 | EN 1504-2 for an impregnation_x000d_ For paints and varnishes |
EN 1062-3 |
determination of shear resistance of joints | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing; determination of shear resistance of joints |
DIN EN 12317-1 |
Determination of slant shear strength | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 12615 |
Determination of watertightness of injected cracks without movement in concrete | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 14068 |
Measurement of bond strength by pull-off DIN EN 1542 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 1542 |
Tensile lap-shear strength of bonded assemblies | Adhesives; Determination of tensile lap-shear strength of bonded assemblies |
DIN EN 1465 |
Thunder-shower cycling (thermal shock) DIN EN 13687-2 | Sprayed mortal SRM according to ZTV-ING |
DIN EN 13687-2 |
Accelerated ageing and heat resistance tests ISO 188 | ZTV Fug-Stb 15 |
ISO 188 |
Adhesion and expansion test | Testing of sealing compounds in buildings constructions_x000d_ Part 1: Conditioning in standard atmospheres, water or increased temperatures |
DIN 52455-1 |
Adhesion by tensile bond strength | Products and systems for the protection and repair of concrete structures - Test methods_x000d_ Part 1: Adhesion and elongation capacity of injection products with limited ductilit_x000d_ Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength_x000d_ Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method |
DIN EN 12618-2 DIN EN 12618-1 DIN EN 12618-3 |
Adhesion/Cohesion properties after immersion in liquid chemicals EN 14187-6 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 14187-6 |
Adhesives for ceramic tiles | Part 2: Test methods |
DIN EN 12004-2 |
Analysis by infrared spectrometry | Testing of petroleum products and related products; General working principles |
DIN 51451 |
Artifical weathering by UV irradiation EN 14187-8 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 14187-8 |
Artificial mineral fibres (KMF) | In-house method: QMA P Bau HV 697 KMF Rev.1 2021-03 |
TRGS 905 |
Buchholz indentation test | Paints and varnishes |
DIN EN ISO 2815 |
Ceramic tiles | Part 2: Determination of dimensions and surface quality_x000d_ Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density_x000d_ Part 4: Determination of modulus of rupture and breaking strength_x000d_ Part 6: Determination of resistance to deep abrasion for unglazed tiles_x000d_ Part 7: Determination of resistance to surface abrasion for glazed tiles_x000d_ Part 8: Determination of linear thermal expansion_x000d_ Part 9: Determination of resistance to thermal shock_x000d_ Part 12: Determination of frost resistance_x000d_ Part 13: Determination of chemical resistance_x000d_ Part 14: Determination of resistance to stains |
DIN EN ISO 10545-2 DIN EN ISO 10545-9 DIN EN ISO 10545-12 DIN EN ISO 10545-4 DIN EN ISO 10545-7 DIN EN ISO 10545-13 DIN EN ISO 10545-8 DIN EN ISO 10545-3 DIN EN ISO 10545-14 DIN EN ISO 10545-6 |
Change in mass and volume after immersion in liquid chemicals (direkt and after reconditioning), classes B, C, D EN 14187-4 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 14187-4 |
Characterization of perceptible properties | Bitumen and bituminous binders |
DIN EN1425 |
Chlorine content | For plastics; Vinyl chloride homopolymers and copolymers_x000d_ Determination of chlorine content_x000d_ |
DIN EN ISO 1158 |
Classification and requirements for sealants | Building construction - Jointing products |
DIN EN ISO 11600 |
Cohesion EN ISO 9047 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN ISO 9047 |
Collection and exchange of reliability and maintenance data for equipment | For petroleum, petrochemical and natural gas industries |
DIN EN 14224 |
Compatibility of injection products | Products and systems for the protection and repair of concrete structures - Test methods_x000d_ Part 1: Compatibility with concrete_x000d_ Part 3: Effect of injection products on elastomers |
DIN EN 12637-3 DIN EN 12637-1 |
Compatibility of sealants | Testing of sealants in building construction - Compatibility of sealants_x000d_ Part 2: Change of adhesion/cohesion properties after immersion in chemical liquids |
DIN 52452-2 |
Compatibility on wet concrete | Products and systems for the protection and repair of concrete structure_x000d_ Test method - Compatibility on wet concrete |
DIN EN 13578 |
cover and repair of concrete components | 2.3.7 (Determination of Pot-life)_x000d_ 2.7.4 (Determination of adhesive tensile strength; examine the surface of mortar)_x000d_ |
DAfStb-Instandsetzungsrichtlinie |
Cracking-bridging ability EN15812 | Tests according to DIN EN 15814 |
EN 15812 |
Cross-cut test | Paints and varnishes |
DIN EN ISO 2409 |
Definitions and characteristics | Flexible sheets for waterproofing_x000d_ DIN EN 13707 Reinforced bitumen sheets for roof waterproofing_x000d_ DIN EN 13970 Bitumen water vapour control layers |
DIN EN 13707 DIN EN 13970 |
Definitions, requirements, quality control and evaluation of conformity | Products and systems for the protection and repair of concrete structures_x000d_ Part 5: Concrete injection |
DIN EN 1504-5 |
Density EN ISO 1183-1 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
DIN EN ISO 1183-1 |
Determination and classification of water-vapour transmission rate EN ISO 7783-1+2 | EN 1504-2 for an impregnation |
EN ISO 7783-1 EN ISO 7783-2 |
Determination of abrasion resistance ISO 5470-1 | EN 1504-2 for an impregnation |
EN ISO 5470-1 |
Determination of adhesion and cohesion following continuous extension (Testing temperature: -20°C) EN 13880-10 | EN 14188-1 |
EN 13880-10 |
Determination of adhesion of granules | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing |
EN 12039 |
Determination of adhesion steel-to-steel for characterisation of structural bonding agents | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 12188 |
Determination of adhesion/cohesion properties of saelants after exposure to heat, water and artificial light through glass | Building construction_x000d_ Jointing products |
DIN EN ISO 11431 |
Determination of adhesion/cohesion properties of sealants at constant temperature EN ISO 9046 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 9046 |
Determination of adhesion/cohesion properties of sealants at variable temperatures EN ISO 9047 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 9047 |
Determination of amine functions using the total basicity number | Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins |
DIN EN 1877-2 |
determination of ammonia-nitrogen | German standard methods for the examination of water, waste water and sludge_x000d_ cations (group E); determination of ammonia-nitrogen (E 5) |
DIN 38406-5 |
Determination of apparent viscosity using a single cylinder type rotational viscometer method | For plastics_x000d_ Resins in the liquid state or as emulsions or dispersions |
DIN EN ISO 2555 |
Determination of asbestos |
TRGS 519 VDI 3866 Part 5 |
|
Determination of ash | For plastics_x000d_ EN ISO 3451-1 (Part 1: General methods)_x000d_ DIN 52005 (Bitumen and bituminous binders) |
DIN 52005 DIN EN ISO 3451-1 |
Determination of bond strength | Flexible sheets for waterproofing_x000d_ Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles |
DIN EN 13596 |
Determination of breaking behaviour | For bitumen and bituminous binders_x000d_ Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method |
DIN EN 13075 |
Determination of cadmium | Water quality_x000d_ Determination of cadmium by atomic absorption spectrometry |
DIN EN ISO 5961 |
Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc in aqua regia extracts of soil | Soil quality _x000d_ Flame and electrothermal atomic absorption spectrometric methods |
DIN ISO 11047 |
Determination of carbon dioxide permeability | For paints and varnishes |
DIN EN ISO 1062-6 |
Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes | Water quality_x000d_ Gas-chromatographic method after liquid-liquid extraction |
DIN EN ISO 6468 |
Determination of change in mass and volume EN ISO 10563 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 10563 |
Determination of chemical resistance of reaction resin mortars | Grouts for tiles |
DIN EN 12808-1 |
Determination of chloride content in hardened concrete | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 14629 |
Determination of chromium | Water quality_x000d_ Atomic absorption spectrometric methods |
DIN EN 1233 |
Determination of compatibility with asphalts pavements EN 13880-9 | EN 14188-1 |
EN 13880-9 |
Determination of composition of hardened concrete DIN EN 52170-1 | Sprayed mortal SRM according to ZTV-ING |
DIN EN 52170-1 |
Determination of compression set DIN ISO 815 | ZTV Fug-Stb 15 |
DIN ISO 815 |
Determination of compressive strength of repair mortar | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 12190 |
Determination of cone penetration EN 13880-2 | EN 14188-1 |
EN 13880-2 |
Determination of creep in compression for repair products DIN EN 13584 | Sprayed mortal SRM according to ZTV-ING |
DIN EN 13584 |
Determination of density | EN 13880-1 (Joint fillers and sealants; EN 14188-1)_x000d_ EN ISO 2811-1 (Pycnometer; paints and varnishes)_x000d_ EN ISO 2811-2 (Immersed body; paints and varnishes)_x000d_ EN ISO 1675 (Plastics; Liquid resins; determination of density by the pyknometer method) |
DIN EN ISO 2811-1 DIN EN ISO 2811-2 EN 13880-1 DIN EN ISO 1675 |
Determination of dissolved anions by liquid chromatography of ions | Water quality_x000d_ Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
DIN EN ISO 10304-1 |
Determination of ductility | Bitumen and bituminous binders |
DIN 52013 |
Determination of dynamic mechanical properties | For plastics_x000d_ Part 2: Torsion-pendulum method |
DIN EN ISO 6721-2 |
Determination of dynamic viscosity by vacuum capillary | Bitumen and bituminous binders _x000d_ |
DIN EN 12596 |
Determination of elastic recovery of sealants EN ISO 7389 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 7389 |
Determination of electrical conductivity | For water quality |
DIN EN 27888 ISO 7888 |
Determination of epoxy equivalent | Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins |
DIN EN 1877-1 |
Determination of extrudability for sealant | Buildings and civil engineering works_x000d_ Part 2: Using standardized apparatus |
DIN EN ISO 8394-2 |
Determination of flow time by use of flow cups | For Paints and varnishes |
DIN EN ISO 2431 |
Determination of form stability under cyclical temperature changes | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing |
DIN EN 1108 |
Determination of glass transition temperatures of polymers | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 12614 |
Determination of hardness ISO 48 | ZTV Fug-Stb 15 |
ISO 48 |
Determination of heat resistance; change in penetration value EN 13880-4 | EN 14188-1 |
EN 13880-4 |
Determination of highly volatile halogenated hydrocarbons | Water quality _x000d_ Gas-chromatographic methods_x000d_ |
DIN EN ISO 10301 |
Determination of homogeneity | Primers for cold and hot applied joint sealants_x000d_ Part 1: Determination of homogeneity |
DIN EN 15466-1 |
Determination of hydrocarbon oil index | Water quality_x000d_ Part 2: Method using solvent extraction and gas chromatography |
DIN EN ISO 9377-2 |
Determination of hydroxyl value | ISO 4629 Binders for paints and varnishes_x000d_ ISO 4629-1 (Titrimetric method without using a catalyst)_x000d_ EN 1240 Adhesives_x000d_ (determination of hydroxyl value and/or hydroxyl content) |
DIN EN 1240 DIN EN ISO 4629-1 |
Determination of indentation hardness by means of a durometer EN ISO 868 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 868 |
Determination of Izod impact strength | For plastics |
DIN EN ISO 180 |
determination of Kjeldahl nitrogen | Water quality_x000d_ method after mineralization with selenium |
DIN EN 25663 |
Determination of length, width and straightness | Flexible sheets for waterproofing_x000d_ Part 1: Bitumen sheets for roof waterproofing |
EN 1848-1 |
Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress | Products and systems for the protection and repair of concrete structures_x000d_ Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress |
DIN EN 13581 |
Determination of modulus of elasticity in compression DIN EN 13412 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 13412 |
Determination of needle penetration | For bitumen and bituminous binders |
DIN EN 1426 |
Determination of nitrate | Water quality_x000d_ Part 3 (spectrometric method using sulfosalicylic acid) |
ISO 7890-3 ISO 7890 |
determination of nitrite | Water quality_x000d_ molecular absorption spectrometric method |
DIN EN 26777 |
Determination of non-volatile-matter content | For paints, varnishes and plastics |
DIN EN ISO 3251 |
Determination of open time | Products and systems for the protection and repair of concrete structures - Test methods |
ISO 12189 |
Determination of organochlorine pesticides and polychlorinated biphenyls | Soil quality _x000d_ Gas-chromatographic method with electron capture detection |
DIN ISO 10382 |
determination of peel resistance of joints | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing; determination of peel resistance of joints |
DIN EN 12316-1 |
Determination of penetration and recovery (resilience) EN 13880-3 | EN 14188-1 |
EN 13880-3 |
Determination of penetration power of bituminous emulsions | For Bitumen and bituminous binders |
DIN EN 12849 |
Determination of permanganate index | Water quality |
DIN EN ISO 8467 |
Determination of phenol index by flow analysis (FIA and CFA) | Water quality - Determination of phenol index by flow analysis (FIA and CFA) |
DIN EN ISO 14402 |
Determination of physical characteristics | Clay roofing tiles for discontinuous laying_x000d_ Part 2: Test for frost resistance |
DIN EN 539-2 |
Determination of pigment content | Paints and varnishes_x000d_ Part 1: Centrifuge method |
DIN EN ISO 14680-1 |
Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sievin | For bitumen and bituminous binders |
DIN EN 1429 |
Determination of resistance against alkali | Primers for cold and hot applied joint sealants_x000d_ Part 2: Determination of resistance against alkali |
DIN EN 15466-2 |
Determination of resistance of capillary absorption DIN EN 13057 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 13057 |
Determination of resistance to carbonation | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 13295 |
Determination of resistance to dynamic water pressure after damage by pre-treatment | Flexible sheets for waterproofing_x000d_ Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles_x000d_ |
DIN EN 14694 |
Determination of resistance to flow sealants EN ISO 7390 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 7390 |
Determination of resistance to impact | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing |
DIN EN 12691 |
Determination of resistance to liquids DIN EN 2812-1 | EN 1504-2 for an impregnation |
DIN EN 2812-1 |
Determination of resistance to root penetration | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing |
DIN EN 13948 |
Determination of resistance to static loading | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing |
DIN EN 12730 |
Determination of resistance to tearing | Flexible sheets for waterproofing_x000d_ Part 1: Bitumen sheets for roof waterproofing_x000d_ Part 2: Plastic and rubber sheets for roof waterproofing |
DIN EN 12310-1 DIN EN 12310-2 |
Determination of resistance to wear by abrasive wheels | For plastics |
ISO 9352 |
Determination of roll characteristics | Rubber- or plastics-coated fabrics_x000d_ Part 3: Method for determination of thickness |
DIN EN ISO 2286-3 |
Determination of Segregation Tendency | Testing of Bituminous Materials for Road Building and Related Purposes |
DIN 1996-16 |
Determination of shear strength | Flexible sheets for waterproofing_x000d_ Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles |
DIN EN 13653 |
Determination of shrinkage and expansion DIN EN 12617-4 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 12617-4 |
Determination of shrinkage and expansion DIN EN 12617-4 | Sprayed mortal SRM according to ZTV-ING |
DIN EN 12617-4 |
Determination of solids content and evaporation behaviour of volatiles | Primers for cold and hot applied joint sealants_x000d_ Part 3: Determination of solids content and evaporation behaviour of volatiles |
DIN EN 15466-3 |
Determination of storage stability of modified bitumen | Bitumen and bituminous binders |
DIN EN 13399 |
Determination of strength DIN EN 196-1 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 196-1 |
Determination of stress relaxation in compression at ambient and at elevated temperatures DIN ISO 3384 | ZTV Fug-Stb 15 |
DIN ISO 3384 |
Determination of tear strength | Rubber, vulcanized or thermoplastic_x000d_ Part 1: Trouser, angle and crescent test pieces |
DIN ISO 34-1 |
Determination of temperature of deflection under load | For plastics_x000d_ ISO 75-2 (Part 2: Plastics and ebonite)_x000d_ ISO 75-3 (Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics) |
DIN EN ISO 75-2 DIN EN ISO 75-3 |
Determination of tensile properties | EN 12311-1 (flexible sheets for waterproofing; Part 1: Bitumen sheets for roof waterproofing)_x000d_ EN 527-1 (for plastics; Part 1: General principles)_x000d_ EN 527-2 (Part 2: Test conditions for moulding and extrusion plastics) |
DIN EN ISO 527-2 EN 12311-1 DIN EN ISO 527-1 |
Determination of tensile properties (Extension to break) EN ISO 8339 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 8339 |
Determination of tensile properties of sealants at maintained extension after immersion in water (4d) EN ISO 10590 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 10590 |
Determination of tensile properties of sealants at meintained extension after immersion in water EN ISO 10591 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 10591 |
Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test | Testing of rubber |
DIN 53504 |
Determination of tensile strength development for polymers | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 1543 |
Determination of tensile stress-strain properties ISO 37 | ZTV Fug-Stb 15 |
ISO 37 |
Determination of tension | Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load |
DIN ISO 2285 |
Determination of the adhesion conrete to concrete | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 12636 |
Determination of the behaviour of bitumen sheets during application of mastic asphalt | Flexible sheets for waterproofing_x000d_ Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles_x000d_ |
DIN EN 14693 |
Determination of the change in weight of fuel resistance joint sealants | Hot applied joint sealants_x000d_ Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion |
DIN EN 13880-8 |
Determination of the Chemical Oxygen Demand (COD) | German Standard Methods for Examination of Water, Waste Water and Sludge_x000d_ DIN 38409-1 (determination of total dry residue, filtrate dry residue and residue on ignition)_x000d_ DIN 38409-2 (determination of filterable matter and the residue on ignition)_x000d_ DIN 38409-6 (summary indices of actions and substances (group H); water hardness)_x000d_ DIN 38409-7 (Parameters characterizing effects and substances (group H); Determination of acid and base-neutralizing capacities)_x000d_ DIN 38409-16 (Summary Action and Material Characteristic Parameters (Group H); determination of the phenol index)_x000d_ DIN 38409-41 (Determination of the Chemical Oxygen Demand (COD) in the Range over 15 mg/l)_x000d_ DIN 38409-44 (parameters characterizing effects and substances (group H); determination of the chemical oxygen demand (COD), ranging from 5 to 50 mg/l)_x000d_ _x000d_ |
DIN 38409-2 DIN 38409-6 DIN 38409-1 DIN 38409-16 DIN 38409-41 DIN 38409-44 DIN 38409-7 |
Determination of the discontinuous extension (adherence test) (Testing temperature: -25°C) EN 13880-13 | EN 14188-1 |
EN 13880-13 |
Determination of the discontinuous extension (adherence test) after immersion in water (Testing temperature: -25°C) EN 13880-13 | EN 14188-1 |
EN 13880-13 |
Determination of the durability of structural bonding | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 13733 |
Determination of the effect on corrison susceptibility of reinforcing steel by potentiostatic electro-chemical test DIN EN 480-14 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 480-14 |
Determination of the elastic recovery of modified bitumen | For bitumen and bituminous binders |
DIN EN 13398 |
Determination of the electrical resistance | Resilient, laminate and modular multilayer floor coverings |
DIN EN 1081 |
Determination of the filtration stability | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 14497 |
Determination of the flow resistance EN 13880-5 | EN 14188-1 |
EN 13880-5 |
Determination of the Fraass breaking point | Bitumen and bituminous binders |
DIN EN 12593 |
Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS) | Thermal insulation products for building applications |
DIN EN 13496 |
Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing | For paints and varnishes |
DIN EN ISO 9514 |
Determination of the resistance to compaction of an asphalt layer | Flexible sheets for waterproofing_x000d_ Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles |
DIN EN 14692 |
Determination of the resistance to hardening under influence of heat and air | Bitumen and bituminous binders_x000d_ Part 1: RTFOT method |
DIN EN 12607 |
Determination of the slip resistance by means of the pendulum tester | Natural stone test methods |
DIN EN 14231 |
Determination of the softening point - Ring and Ball method EN 1427 | EN 14188-1 |
EN 1427 |
Determination of the stickiness of rapid curing cut-backs | Bitumen and bituminous binders |
DIN 52033 |
Determination of the tensile properties of modified bitumen by the force ductility method | For bitumen and bituminous binders |
DIN EN 13589 |
Determination of the time to rupture | Adhesives - Determination of the time to rupture of bonded joints under static load |
DIN EN 15336 |
Determination of the water content | Tests for mechanical and physical properties of aggregates_x000d_ Part 5: Determination of the water content by drying in a ventilated oven_x000d_ EN 1428 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
DIN EN 1428 DIN EN 1097-5:2008-06 |
Determination of thermal compatibility | Products and systems for the protection and repair of concrete structures - Test method_x000d_ Part 4: Dry thermal cycling |
DIN EN 13687-4 |
Determination of thermal compatibility DIN EN 13687-1 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 13687-1 |
Determination of thermal compatibility DIN EN 13687-2 | Sprayed mortal SRM according to ZTV-ING |
DIN EN 13687-2 |
Determination of thermal compatibility EN 13687-1 | EN 1504-2 for an impregnation |
DIN EN 13687-1 |
Determination of thermal compatibility EN 13687-2 | EN 1504-2 for an impregnation |
EN 13687-2 |
Determination of thermal compatibility EN 13687-3 | EN 1504-2 for an impregnation |
EN 13687-3 |
Determination of thickness and mass per unit area | Flexible sheets for waterproofing_x000d_ Part 1: Bitumen sheets for roof waterproofing |
EN 1849-1 |
Determination of thixotropy of products for protection of reinforcement | Products and systems for the protection and repair of concrete structure - Test method |
DIN EN 13062 |
Determination of time of efflux | Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products |
DIN EN 14117 |
determination of total organic carbon (TOC) and dissolved organic carbon (DOC) | Water analysis_x000d_ Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) |
DIN EN 1484 |
Determination of Vicat softening temperature (VST) | For plastics_x000d_ Thermoplastic materials |
DIN EN ISO 306 |
Determination of visible defects | Flexible sheets for roofing_x000d_ Part 1: Bitumen sheets for roof waterproofing |
EN 1850-1 |
Determination of water | German standard methods for the determination of water, waste water and sludge_x000d_ Jointly determinable substances (group F)_x000d_ F3 (Determination of polychlorinated biphenyls) |
DIN 38407-3 |
Determination of water absorption | EN 14223 (Flexible sheets for waterproofing_x000d_ Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles)_x000d_ EN 12808-5 (Grouts for tiles)_x000d_ |
DIN EN 14223 DIN EN 12808-5 |
Determination of water-soluble chloride content of fresh mortars DIN EN 1015-17 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 1015-17 |
Determination of wet-scrub resistance and cleanability of coatings | For paints and varnishes |
DIN EN ISO 11998 |
Determination to tensile properties EN ISO 8339 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 8339 |
Differential scanning calorimetry DSC | For plastics_x000d_ Part 2: Determination of glass transition temperature and step height_x000d_ Part 3: Determination of temperature and enthalpy of melting and crystallization_x000d_ Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) |
ISO 11357-6 ISO 11357-3 DIN EN ISO 11357-2 |
Dimensional stability at high temperture EN 15818 | Tests according to DIN EN 15814 |
EN 15818 |
Dimensional tolerance DIN ISO 3302-1 | ZTV Fug-Stb 15 |
DIN ISO 3302-1 |
Drying tests | For paints and varnishes_x000d_ ISO 9117-3 (Surface-drying test using ballotini) |
DIN EN ISO 9117-3 |
Elastic recovery EN ISO 7389 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN ISO 7389 |
EN 1504-2 for hydrophobic impregnations | EN 1504-2: Surface protection products and systems for concrete_x000d_ EN 13580: Water absorption and resistance to alkali for hydrophobic impregnations_x000d_ EN 13579: Drying test for hydrophobic impregnations |
EN 13580 EN 13579 EN 1504-2 |
Epoxide equivalent | For plastics; epoxide compounds; Determination of epoxide equivalent |
DIN EN ISO 3001 |
Epoxy resins - General methods of test | Binders for paints and varnishes |
DIN EN ISO 7142 |
Evaluation of the action of microorganisms | For plastics |
DIN EN ISO 846 |
Examination and determination of colour | Water quality_x000d_ Examination and determination of colour |
DIN EN ISO 7887 |
Examination of water | German standard methods for the examination of water, waste water and sludge;_x000d_ Physical and physico-chemical parameters (group C)_x000d_ C10 (Calculation of the calcit saturation of water)_x000d_ anions (group D)_x000d_ D1 (determination of chloride ions)_x000d_ D4 (determination of fluoride)_x000d_ D5 (determination of sulfate ions)_x000d_ D9 (Spectrometric determination of nitrate)_x000d_ D21 (determination of dissolved silicate by spectrometry)_x000d_ D24 (photometric determination of chromium(VI) using 1,5-diphenylcarbonohydrazide)_x000d_ D27 (Determination of sulfide by gas extraction method)_x000d_ cations (group E)_x000d_ E1 (determination of iron)_x000d_ E3 (Determination of calcium and magnesium, complexometric method)_x000d_ E6 (Determination of lead by atomic absorption spectrometry (AAS))_x000d_ E7 (determination of copper by atomic absorption spectrometry (AAS))_x000d_ E8 (Determination of zinc - Method by atomic absorption spectrometry (AAS) using an air-ethine flame)_x000d_ E11 (determination of nickel by atomic absorption spectrometry (AAS))_x000d_ E13 (determination of potassium by atomic absorption spectrometry (AAS) using an air-acetylene flame)_x000d_ E14 (determination of sodium by atomic absorption spectrometry (ASS) using an air-acetylene flame)_x000d_ E26 (determination of thallium by atomic absorption spectrometry (AAS) using electrothermal atomisation)_x000d_ E32 (Determination of iron by atomic absorption spectrometry)_x000d_ _x000d_ |
DIN 38406-26 DIN 38406-11 DIN 38405 DIN 38406-32 DIN 38406-14 DIN 38406-6 DIN 38405-4 DIN 38406-1 DIN 38405-9 DIN 38405-5 DIN EN 38405-24 DIN 38406-3 DIN 38405-21 DIN 38404-10 DIN 38406-8 DIN 38406-7 DIN 38406-13 DIN 38405-27 DIN 38405-1 |
Extension to break EN ISO 8339 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 8339 |
External two layer extruded polyethylene based coatings | Steel tubes and fittings for on and offshore pipelines |
DIN EN 10288 |
Extraction of trace elements | Soil quality_x000d_ Extraction of trace elements from soil using ammonium nitrate solution |
DIN ISO 19730 |
Extrudability for one component sealant DIN EN 8394-1 EN 28394 | Test programm according to TL Fug-StB15 and EN 14188-2 |
DIN EN 8394-1 EN 28394 |
Fire behaviour of building materials and building components | Part 1: Building materials; concepts, requirements and tests |
DIN 4102-1 |
Fire classification of construction products and building elements EN 13501-1 | EN 1504-2 for an impregnation |
DIN EN 13501-1 |
Flexibility at low temperature EN 15813 | Tests according to DIN EN 15814 |
EN 15813 |
Flexible sheets for waterproofing | Bitumen sheets for roof waterproofing_x000d_ EN 1109 (Determination of flexibility at low temperature)_x000d_ EN 1110 (Determination of flow resistance at elevated temperature)_x000d_ Bitumen, plastic and rubber sheets for roof waterprofing_x000d_ EN 1296 (Method for artificial ageing by long term exposure to elevated temperature)_x000d_ EN 1928 (Determination of watertightness)_x000d_ EN 1931 ( Determination of water vapour transmission properties) |
DIN EN 1109 EN 1110 DIN EN 1296 DIN EN 1931 DIN EN 1928 EN 1107-1 |
Flexural properties | For plastics_x000d_ Determination of flexural properties |
DIN EN ISO 178 |
Flexural strength test | Clay roofing tiles for discontinuous laying |
EN 538 |
Floor screeds | Floor screeds in building construction _x000d_ Part 2: Floor screeds and heating floor screeds on insulation layers_x000d_ Floor screeds_x000d_ Part 4: Screeds laid on separated layer |
DIN 18560-2:2009-09 DIN 18560-4:2012-06 |
Function testing of joint sealants - Cohesion for cold climate areas (optional) EN 13880-7 | EN 14188-1 |
EN 13880-7 |
Granulometry analysis DIN EN 12192-1 | Sprayable polymer cerment concrete SRM according to ZTV-ING_x000d_ Products and systems for the protection and repair of concrete structures_x000d_ Part 2: Test method for fillers for polymer bonding agents |
DIN EN 12192-2 DIN EN 12192-1 |
Guideline for European technical approval of external thermal insulation composite systems (etics) with rendering | 5.1.3.1 water adsorption (capillarity test)_x000d_ 5.1.3.3.1 Impact resistence_x000d_ 5.1.4.1.1 the bond strength between the base coat and the insulation product shall be tested_x000d_ 5.1.4.1.2 Bond strength test between adhesive (mortar or paste) and substrate_x000d_ 5.1.4.1.3 Bond strength test between adhesive (mortar or paste) and insulation product_x000d_ 5.6.7.1 Glass fibre mesh; tensile strength and elongation* of the reinforcing fabric_x000d_ C.1.1 density (pastes and liquids); C.1.2 dry extract; C.1.4 size distribution; C.2.1 ash content; C.2.2 dimensional characteristics and appearance; C.3.2 density of wet mortar; C.5.1 measurement of density (thermal insulation); C.6.3 mesh opening and number of threads |
ETAG 004 |
Ignitability of products subjected to direct impingement of flame | Reaction to fire tests_x000d_ Part 2: Single-flame source test |
DIN EN ISO 11925-2 |
Impact resistance DIN EN 6272-1 | EN 1504-2 for an impregnation |
DIN EN 6272-1 |
Infrared analysis DIN EN 1767 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 1767 |
Infrared spectroscopy FTIR |
DIN EN 1767 SS-ISO 4650 |
|
Initial test on a surface protection system of class OS 11 a/b according to DIN V 18026 | DIN EN 1062: Dynamic crack bridging ability_x000d_ EN 1062-3: Capillary absorption and permeability to water_x000d_ EN 13036-4: Slip/skid resistance_x000d_ EN 13529: Resistance to serve chemical attack_x000d_ EN 13687-1: Freeze-thaw cycling with de-icing salt immersion_x000d_ EN 13687-2: Thunder-shower cycling (thermal shock)_x000d_ EN ISO 5470-1: Abrasion resistance_x000d_ ISO 6272-1: Impact resistance |
EN 1062-3 EN 13687-2 EN ISO 5470-1 EN 13687-1 EN 13529 ISO 6272-1 EN 13036-4 DIN EN 1062 |
Insulating glass units | Glass in building_x000d_ Part 4: Methods of test for the physical attributes of edge seal components and inserts |
DIN EN 1279-4 |
Isocyanate content | Adhesives; Determination of isocyanate content |
DIN EN 1242 |
Joint fillers and sealants - Test methods for preformed joint seals DIN EN 14840 | ZTV Fug-Stb 15 |
DIN EN 14840 |
leaching behaviour | Leaching of solid materials_x000d_ DIN 19528 (Percolation method for the joint examination of the leaching behaviour of inorganic and organic substances)_x000d_ DIN 19529 (Batch test for the examination of the leaching behaviour of inorganic and organic substances at a liquid to solid ratio of 2 l/kg) |
DIN 19529 DIN 19528 |
leaching of granular waste materials and sludges | Characterization of waste_x000d_ Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size reduction) |
DIN EN 12457-4 |
Light microscopy / layer thicknesses | For paints and varnishes |
DIN EN ISO 2808 |
Liquid applied bridge deck waterproofing kits | ETAG 033: Test method for the determination of the behaviour of liquid applied bridge deck waterproofing kits applied on a vertical surface |
EAD 030675-00-0107 ETAG 033 |
Liquid water permeability |
DIN EN ISO 1062-3 |
|
Loss of volume EN ISO 10563 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN ISO 10563 |
Material requirements and testing | Thermoplastic waterstops for sealing joints in concrete_x000d_ Part 2: Material requirements and testing |
DIN 18541-2 |
Measurement of bond strength by pull-off DIN EN 1542 | Sprayed mortal SRM according to ZTV-ING |
DIN EN 1542 |
Measurement of bond strength by pull-off DIN EN 1542 | EN 1504-2 for an impregnation |
DIN EN 1542 |
Measurement of dynamic coefficient of friction on dry floor surfaces | Resilient, laminate and textile floor coverings |
DIN EN 13893 |
Measurement of gel time at ambient temperature | For plastics; unsaturated polyester resins |
DIN EN ISO 2535 |
Measurement of the formaldehyde concentration | Gaseous ambient air measurements - Indoor-air pollution measurements - Test gases measurements; Measurement of the formaldehyde concentration with the sulfite pararosaniline method |
VDI 3484 blatt1 |
Measurement of viscosities and flow curves by means of rotational viscometers | Viscometry; Part 1: Principles and measuring geometry |
DIN 53019-1 |
Method of testing cement | Part 2: Chemical analysis of cement_x000d_ Part 3: Determination of setting times and soundness |
DIN EN 196-3 DIN EN 196-2 |
Methods for exposure to liquid chemicals, including water | Flexible sheets for waterproofing_x000d_ Plastics and rubber sheets for roof waterproofing |
DIN EN 1847 |
Methods of conditioning before testing | For paints and varnishes |
DIN EN 1062-11 |
Methods of test for mortar for masonry | Part 3: Determination of consistence of fresh mortar (by flow table)_x000d_ Part 4: Determination of consistence of fresh mortar_x000d_ Part 6: Determination of bulk density of fresh mortar_x000d_ Part 7: Determination of air content of fresh mortar_x000d_ Part 10: Determination of dry bulk density of hardened mortar_x000d_ Part 11: Determination of flexural and compressive strength of hardened mortar_x000d_ Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates_x000d_ |
DIN EN 1015-4 DIN EN 1015-12 DIN EN 1015-3 DIN EN 1015-11 DIN EN 1015-10 DIN EN 1015-6 DIN EN 1015-7 |
Methods of test for screed materials | Part 4: Determination of wear resistance BCA |
DIN EN 13892-4 |
Methods of test for screed materials | Part 2: Determination of flexural and compressive strength_x000d_ Part 3: Determination of wear resistance - Böhme |
DIN EN 13892-2:2003-02 DIN EN 13892-3 |
Oilbinding agents |
LTwS-Nr. 27 DWA-A 719-10 DWA-A 716-9 DWA-A 716-1 |
|
Peeling test | Test of fusions on PE liners |
DVS 2226-3 |
Penetration depth EN 1504-2 | EN 1504-2 for an impregnation |
EN 1504-2 |
Polyisocyanate resins - General methods of test | Binders for paints and varnishes |
DIN EN ISO 11909 |
Preinsulated bonded pipe systems for directly buried hot water networks | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
DIN EN 489 |
Preparation of samples for testing EN 13880-6 | EN 14188-1 |
EN 13880-6 |
Principles | Thermal analysis (TA), Thermogravimetry (TG) |
DIN 51006 |
Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test DIN EN 15183 | DIN EN 15183: Corrosion protection test_x000d_ DIN EN 15184: Shear adhesion coated steel to concrete (pull-out test) |
DIN EN 15183 DIN EN 15184 |
Products and systems for the protection and repair of concrete structures DIN EN 13412 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 13412 |
Properties and requirements | Screed material and floor screeds - Screed materials |
DIN EN 13813 |
Pull-off test for adhesion | Paints and varnishes |
DIN EN ISO 4624 |
Rain strength of just applied sprayable jointing products | Testing of sealing compounds in building construction |
DIN 52461 |
Rapid-deformation (impact resistance) tests | Paints and varnishes_x000d_ Part 2: Falling-weight test, small-area indenter |
DIN EN ISO 6272-2 |
Rate of Cure EN 14187-1 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 14187-1 |
Reaction to fire EN 13501-1 | Tests according to DIN EN 15814 |
EN 13501-1 |
Reduction of the thickness of the layer when fully dried EN 15819 | Tests according to DIN EN 15814 |
EN 15819 |
Requirements and test methods | ISO 179 Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes_x000d_ EN 1344 Clay pavers |
ISO 179 DIN EN 1344 |
Resistance of flame EN 14187-7 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 14187-7 |
Resistance of hydrolysis EN 14187-5 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 14187-5 |
Resistance to compression EN15815 | Tests according to DIN EN 15814 |
EN 15815 |
Resistance to liquids |
NO STANDARD DEFINED DIN EN ISO 2812-1 DIN EN ISO 175 DIN EN ISO 2812-2 DIN EN ISO 2812-3 |
|
Resistance to ozone cracking DIN ISO 1431-1 | ZTV Fug-Stb 15 |
DIN ISO 1431-1 |
Resistance to rain EN15816 | Tests according to DIN EN 15814 |
EN 15816 |
Scanning electron microscopy with energy dispersive spectroscopy SEM/EDS | Utilizing the SEM/EDS Microscope System, we can examine micro-scale and nano-scale features with magnification up to 20,000x and detect chemical elemental composition in or on the surface of your test sample. |
Inhouse method |
Sealants - Determination of tensile properties at maintained extension EN ISO 8340 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 8340 |
Sealants for non-structural use in joints in buildings and pedestrian walkways | Part 3: Sealants for sanitary joints |
DIN EN 15651-3 |
Self-leveling properties or resistance flow EN 14187-3 EN ISO 7390 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN ISO 7390 EN 14187-3 |
Separator systems for light liquids (e. g. oil and petrol) | Part 1: Principles of product design, performance and testing, marking and quality control |
DIN EN 858-1 |
Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application | Adhesives_x000d_ Part 1: General procedure_x000d_ Part 2: Determination of volatile organic compounds_x000d_ Part 3: Determination of volatile aldehydes |
DIN EN 13999-3 DIN EN 13999-1 DIN EN 13999-2 |
Specification | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling |
DIN EN ISO 1825 |
Specification for plain and decorative linoleum on a foam backing | Resilient floor coverings |
DIN EN 686 |
Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis |
ASTM E 1252 |
|
Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts |
ASTM C 1181 |
|
suitability of structural bonding agents | Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface |
DIN EN 1799 |
Suitability of water | Mixing water for concrete_x000d_ Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
DIN EN 1008:2002-10 |
Surface protection products and systems for concrete EN 1504-2 | DIN EN 1542: Measurement of bond strength by pull-off_x000d_ DIN EN ISO 7783: Determination of water-vapour transmission properties - Cup method _x000d_ EN 1062-3: Determination of liquid water permeability_x000d_ EN 1062-6: Determination of carbon dioxide permeability_x000d_ EN 13529: Resistance to severe chemical attack_x000d_ EN ISO 5470-1: Determination of abrasion resistance |
EN 1062-3 EN ISO 5470-1 DIN EN ISO 7783 EN 1062-6 DIN EN 1542 EN 13529 |
Tack free time EN 14187-2 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 14187-2 |
temperatures and humidities for conditioning and testing | For paints, varnishes and their raw materials |
DIN EN 23270 |
Tensile properties at maintained extension EN 8340 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 8339 |
Tensile strength at 23°C and -20°C EN 8340 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 8340 |
Tensile test | Testing of welded joints between panels and pipes made of thermoplastics |
DVS 2203-2 |
Terminology | Round and sawn timber_x000d_ Trilingual version |
DIN EN 844 |
Test according to ETAG 022 | EN ISO 12572: Resistance to water vapor_x000d_ PrEN 14891: Water tightness (chapter A.7)_x000d_ PrEN 1062-7: Crack bridging ability (method C 2); Resistance to heat ageing (method C 2)_x000d_ PrEN 14891: Tensile adhesion strength (chapter A 6.2); Resistance to heat ageing (chapter A 6.5)_x000d_ PrEN 14891: Resistance to water ageing (chapter A 6.3); Resistance to alkine solution (chapter A 6.9)_x000d_ EOTA WTAG 022: Thickness (annex D); Water tightness around penetrations an other details in wet room floors with flexible Substrates (annex A); Impermeability when subject to movement of the underlying meterial - tensile and shear loading (annex B); Water tightness around penetrations an other details in wet room floors with flexible Substrates (annex F) |
EN ISO 12572 NO STANDARD DEFINED PrEN 1062 EOTA WTAG 022 PrEN 14891 PrEN 1062-7 |
test method for nonwovens | For textiles_x000d_ Part 1: determination of mass per unit area_x000d_ Part 3: determination of tensile strength and elongation |
DIN EN 29073-3 DIN EN 29073-1 |
Test methods | Grout for prestressing tendons |
DIN EN 445:2008-01 |
Test methods | Products and systems for the protection and repair of concrete structures_x000d_ Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS)_x000d_ Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage_x000d_ Part 3: Determination of early age linear shrinkage for structural bonding agents |
DIN EN 12617-3 DIN EN 12617-2 DIN EN 12617-1 |
Test methods for fatigue properties | Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear |
DIN EN ISO 9664 |
Testing | For plastic sheets |
DIN 16726 |
Testing bonded joints | Adhesives_x000d_ Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
DIN EN ISO 9142 |
Testing hardened concrete | Part 8: Depth of penetration of water under pressure |
DIN EN 12390-8 |
Testing of a liquid applied roof waterproofing kit (LARWK) according ETAG 005 part 1 and 8 | EN ISO 527: resistance to heat ageing_x000d_ TR003: water tightness_x000d_ TR004: resistance to wind loads_x000d_ TR006: resistance to heat ageing; resistance to low temperatures; resistance to dynamic indentiation_x000d_ TR007: resistance to static indentation; resistance to high temperatures _x000d_ TR008: resistance to fatigue movement - multiple crack bridging; resistance to heat ageing_x000d_ TR009: gliding surface_x000d_ TR010: UV-Radiation in the presence of moisture_x000d_ TR 011: resistance to heat ageing_x000d_ TR013: resistance to extreme low temperatures |
EN ISO 527 EOTA TR009 EOTA TR 011 EOTA TR007 EOTA TR004 EOTA TR006 EOTA TR 012 EOTA TR003 EOTA TR008 EOTA TR010 EOTA TR013 |
Testing of asphalt | DIN 1996-17 Determination of dimensional stability when heated (Nüssel deformation index)_x000d_ DIN 1996-18 Herrmann falling ball test |
DIN 1996-18 DIN 1996-17 |
Testing of bitumen and polymer bitumen sheets | bitumen and polymer bitumen sheets |
DIN 52123 |
Testing of resins, hardeners and accelerators, and catalyzed resins |
DIN 16945 |
|
Tests according to EN 14891 | Initial tensile adhesion (chapter A6.2); Tensile adhesion strength after contact with water (chapter A6.4); Tensile adhesion strength after heat ageing (chapter A6.5); Tensile adhesion strength after Freeze/thaw (chapter A6.6); Tensile adhesion strength after with lime water (chapter A6.9); Waterproofing (chapter A.7); Crack bridging ability under standard conditions (chapter A 8.2); Tensile adhesion strength after contact with chlorinated water (chapter A 6.7 or A 6.8); Crack bridging ability at low temperature (-5°C) (chapter A 8.3); Crack bridging ability at very low temperature (-20°C) (chapter A8.3) |
EN 14891 |
Tests for geometrical properties of aggregates | Part 1: Determination of particle size distribution - Sieving method |
DIN EN 933-1 |
Thermogravimetric analysis TGA |
ISO 9925-2 ISO 9925-3 DIN EN ISO 11358 |
|
Thermogravimetry (TG) of polymers DIN EN ISO 11358-1 | Sprayable polymer cerment concrete SRM according to ZTV-ING_x000d_ For plastics |
DIN EN ISO 11358-1 |
Thermogravimetry (TG) of polymers EN ISO 11358 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
DIN EN ISO 11358 |
Thin-layer chromatography TLC |
Inhouse method |
|
T-peel test for flexible-to-flexible bonded assemblies | Adhesives |
DIN EN ISO 11339 |
Type of product, dimensions, tolerances and markings | Welding consumables - Technical delivery conditions for filler materials and fluxes |
EN 544 |
Überdehnungschutz TP Fug-StB | ZTV Fug-Stb 15 |
TP Fug-StB |
Ultrasonic testing | Non-destructive testing of welds _x000d_ Use of automated phased array technology |
DIN EN ISO 13588 |
Units of measurement | For air quality; general aspects |
DIN ISO 4226 |
Volume and weight changes | Products and systems for the protection and repair of concrete structures - Test methods_x000d_ Volume and weight changes of injection products after air drying and water storage cycles |
DIN EN 14498 |
Water resistance EN 15817 | Tests according to DIN EN 15814 |
EN 15817 |
watertight covering kits | EAD 030352-00-0503 (liquid applied watertight covering kits for wet room floors and/or walls)_x000d_ EAD 030436-00-0503 (watertight covering kits based on flexible sheets for wet room floors and or walls)_x000d_ EAD 030437-00-0503 (watertight covering kits based on inherently watertight boards for wet room floors and or walls)_x000d_ ETAG 022-1 (Watertight covering kits for wet room floors and or walls; Part 1: liquid applied coverings with or without wearing surface; Annex D: waterproofing in liquid form: applicability and thickness of finished membrane) |
EAD 030352-00-0503 ETAG 022-1 EAD 030437-00-0503 EAD 030436-00-0503 |
Watertightness EN 15820 | Tests according to DIN EN 15814 |
EN 15820 |
Water-vapour transmission | DIN EN ISO 12572 (Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method) |
DIN EN 1931 DIN EN ISO 12572 DIN EN ISO 7783 DIN EN 13416 ASTM E 96 DIN 53122-1 |
General requirements and tests of luminaires for aquarium luminaires
Accredited: Yes
Capability | Description | Standard |
---|---|---|
Appliances having one or more burners with an automatic buner control system | Domestic cooking appliances burning gas-Safety- Appliances having one or more burners with an automatic buner control system |
EN 30-1-4 EN 30-1-4 |
Luminous radiant heaters | Non-domestic gas-fired overhead luminous radiant heaters - Safety_x000d_ - Single burner gas-fired overhead radiant tube heaters for non- domestic use - Rational use of energy |
EN 419-1 EN 419-1 EN 419-2 EN 419-2 |
Air heaters | Non- Domestic direct gas fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
EN 525 EN 525 |
Appliances for heating liquids | Safety of household and similar electrical appliances and particular requirements appliances for heating |
EN IEC 60335-2-15:2003 EN IEC 60335-2-15:2003 |
Appliances having a glass ceramic hotplate | Domestic cooking appliances burning gas - Safety - Appliances having a glass ceramic hotplate |
EN 30-1-3 EN 30-1-3 |
Aquarium luminaires | General requirements and tests of luminaires for aquarium luminaires |
EN IEC 60598-2-11 EN IEC 60598-2-11 |
Assessment of energy consumption | Gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 300 l water storage capacity - Part 2: Assessment of energy consumption |
EN 13203-2 EN 13203-2 |
Assessment of performance of hot water deliveries | Gas-fired domestic appliances producing hot water - Appliances not exceding 70 kW heat input and 300 l water storage capacity - Part 1: Assessment of performance of hot water deliveries |
EN 13203-1 EN 13203-1 |
Ball Pressure Test - Fire hazard testing | This part of IEC 60695 specifies the ball pressure test as a method for evaluating the softening temperature and accelerated material flow under load of polymeric materials and parts of end products in their ability to resist abnormal heat. |
EN 60695-10-2 EN 60695-10-2 |
Barbecues | Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included |
EN 498 EN 498 |
Battery chargers | Safety of household and similar electrical appliances and particular requirements for battery chargers |
EN 60335-2-29:2004 +A1 +A2 EN 60335-2-29:2004 +A1 +A2 |
Bend tests | Destructive tests on welds in metallic materials - Bend tests |
EN ISO 5173 EN ISO 5173 |
Boiling pans | Gas heated catering equipment - Specific requirements - Boiling pans |
EN 203-2-3 EN 203-2-3 |
Brat pans and paëlla cookers | Gas heated catering equipment - Specific requirements - Brat pans and paëlla cookers |
EN 203-2-8 EN 203-2-8 |
Burners | Automatic forced draught burners for gaseous fuels |
EN 676 EN 676 |
Carbon monoxide detector test | Electrical apparatus for the detection of carbon monoxide in domestic premises. Part 1: Test methods and performance requirements |
EN 50291-1 EN 50291-1 |
Chargrills | Gas heated catering equipment - Specific requirements - Chargrills |
EN 203-2-10 EN 203-2-10 |
Clothes dryers and towel rails | Safety of household and similar electrical appliances and particular requirements for clothes dryers and towel rails |
EN IEC 60335-2-43 EN IEC 60335-2-43 |
Commercial dispensing appliances and vending machines | Safety of household and similar electrical appliances and particular requirements for commercial dispensing appliances and vending machines |
EN IEC 60335-2-75:2004 EN IEC 60335-2-75:2004 |
Commercial electric bains-marie | Safety of household and similar electrical appliances and particular requirements for commercial electric bains-marie |
EN IEC 60335-2-50:2003 EN IEC 60335-2-50:2003 |
Commercial electric boling pans | Safety of household and similar electrical appliances and particular requirements for commercial electric boling pans |
EN IEC 60335-2-47:2003 EN IEC 60335-2-47:2003 |
Commercial electric cooking ranges, ovens, hobs and hob elements | Safety of household and similar electrical appliances and particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements |
EN IEC 60335-2-36:2004 EN IEC 60335-2-36:2004 |
Commercial electric forced convection ovens, steam cookers and steam convection ovens | Safety of household and similar electrical appliances and particular requirements for commercial electric forced convection ovens, steam cookers and steam convection ovens |
EN IEC 60335-2-42:2003 EN IEC 60335-2-42:2003 |
Commercial electric griddles and griddle grills | Safety of household and similar electrical appliances and particular requirements for commercial electric griddles and griddle grills |
EN IEC 60335-2-37:2004 EN IEC 60335-2-37:2004 |
Commercial electric griddles and griddle grills | Safety of household and similar electrical appliances and particular requirements for commercial electric griddles and griddle grills |
EN IEC 60335-2-38:2003 EN IEC 60335-2-38:2003 |
Commercial electric hot cupboards | Safety of household and similar electrical appliances and particular requirements for commercial electric hot cupboards |
EN IEC 60335-2-49 EN IEC 60335-2-49 |
Commercial electric kitchen machines | Safety of household and similar electrical appliances and particular requirements for commercial electric kitchen machines |
EN IEC 60335-2-64 EN IEC 60335-2-64 |
Commercial electric multi-purpose cooking pans | Safety of household and similar electrical appliances and particular requirements for commercial electric multi-purpose cooking pans |
EN IEC 60335-2-39:2003 EN IEC 60335-2-39:2003 |
Commercial grillers and toasters | Safety of household and similar electrical appliances and particular requirements for commercial grillers and toasters |
EN IEC 60335-2-48:2003 EN IEC 60335-2-48:2003 |
Convection Heaters | Independed gas fired convection heaters |
EN 613 EN 613 |
Decorative fuel-effect gas appliances | Decorative fuel-effect gas appliances |
EN 509 EN 509 |
Deep fat fryers, frying pans and similar appliances | Safety of household and similar electrical appliances and particular requirements for deep fat fryers, frying pans and similar appliances |
EN 60335-2-13:2010 EN 60335-2-13:2010 |
Degrees of protection provided by enclosures (IP code) (For electrical equipments) | This standard applies to the classification of degrees of protection provided by encloswes for electrical equipment with a rated voltage not exceeding 72.5 kV. |
EN 60529:2013 EN 60529:2013 |
Domestic Cookers | General requirements relating to the domestic cookers for use with liquefied petroleum gases (LPG)_x000d_ &_x000d_ Methods of test for domestic cookers for use with liquefied petroleum gases_x000d_ All Tests can be performed. |
SASO 168 SASO 168 SASO 167 SASO 167 |
Domestic cooking - Rational use of energy | Domestic cooking appliances burning gas - Rational use of energy-General |
EN 30-2-1 EN 30-2-1 |
Domestic cooking appliances burning gas | Domestic cooking appliances burning gas - Safety - General |
EN 30-1-1 EN 30-1-1 |
Electric irons | Safety of household and similar electrical appliances and particular requirements for electric irons |
EN 60335-2-3 EN 60335-2-3 |
Electrical apparatus for the detection of combustible gases in domestic premises | Test methods and performance requirements of electrical apparatus for the detection of combustible gases in domestic premises |
EN 50194-1 EN 50194-1 |
Electrical equipment of machines | Safety of machinery |
EN 60204-1:2006 EN 60204-1:2006 |
Environmental testing - Tests A: Cold | This standards deals with cold tests applicable to both non heat-dissipating and heat-dissipating specimens. For non heat-dissipating specimens, Tests Ab and Ad do not deviate essentially from earlier issues. Test Ae has been added primarily for testing equipment that requires being operational throughout the test, including the conditioning periods. The object of the cold test is limited to the determination of the ability of components, equipment or other articles to be used, transported or stored at low temperature. |
EN 60068-2-1 EN 60068-2-1 |
Environmental testing - Part 1: General and guidance | The IEC 60068 series includes a series of methods for environmental testing along with their appropriate severities, and prescribes various atmospheric conditions for measurements and tests designed to assess the ability of specimens to perform under expected conditions of transportation, storage and all aspects of operational use. |
EN 60068-1 EN 60068-1 |
Environmental testing - Test B: Dry heat | This standard deals with dry heat tests applicable both to heat-dissipating and non heat dissipating specimens. |
EN 60068-2-2 EN 60068-2-2 |
Environmental testing - Test Cab: Damp heat, steady state | Test Cab: Damp heat, steady state |
EN 60068-2-78 EN 60068-2-78 |
Environmental testing - Test Db: Damp heat, cyclic (12 h + 12 h cycle) | To determine of suitability of components, equipment or other articles for use and storage under conditions of high humidity when combined with cyclic temperature changes and, in general, producing under station on the surface of the specimen |
EN 60068-2-30 EN 60068-2-30 |
Extra low-voltage lighting systems for filament lamps | General requirements and tests of luminaires for extra low-voltage lighting systems for filament lamps |
EN 60598-2-23 EN 60598-2-23 |
Fire hazard testing - Glowing/hot-wire based test methods | Glow-wire flammability index (GWFI) test method for materials |
EN IEC 60695-2-12 EN IEC 60695-2-12 |
Fire hazard testing – Glowing/hot-wire based test methods | Glow-wire ignition temperature (GWIT) test method for materials |
EN IEC 60695-2-13 EN IEC 60695-2-13 |
Fire hazard testing – Glowing/hot-wire based test methods | Glow-wire flammability test method for end-products (GWEPT) |
EN IEC 60695-2-11 EN IEC 60695-2-11 |
Fire hazard testing - Needle-flame test method | This part of IEC 60695 specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess by a simulation technique the fire hazard. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials. |
EN IEC 60695-11-5 EN IEC 60695-11-5 |
Fixed general purpose luminaires | General requirements and tests of luminaires for fixed general purpose luminaires |
EN IEC 60598-2-1 EN IEC 60598-2-1 |
Floating Roller Peel Test | Adhesives —_x000d_ Determination of peel_x000d_ resistance of adhesive_x000d_ bonds — Floating roller_x000d_ method |
EN 1464:2010 EN 1464:2010 |
Floodlights | General requirements and tests of luminaires for floodlights |
EN 60598-2-5 EN 60598-2-5 |
Forced convection gas-fired air heaters | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
EN 1020 EN 1020 |
Forced-convection ovens and/or grills | Domestic cooking appliances burning gas - Rational use of energy - Appliances having forced-convection ovens and/or grills |
EN 30-2-2 EN 30-2-2 |
Forced-convection ovens and/or grills | Domestic cooking appliances burning gas - Safety - Appliances having forced-convection ovens and/or grills |
EN 30-1-2 EN 30-1-2 |
Fracture test | Destructive tests on welds in metallic materials - Fracture test |
EN ISO 9017 EN ISO 9017 |
Fryers | Gas heated catering equipment - Specific requirements - Fryers |
EN 203-2-4 EN 203-2-4 |
Gas Fired Catering Equipment | Testing of gas heated catering equipment Part 1 |
SASO GSO EN 203-1 SASO GSO EN 203-1 |
Gas Fired Domestic Cookers | Testing construction and performance characteristics as well as the requirements and methods of test for the safety and marking of domestic cooking appliances, capable of using the combustible gases having one or more enclosed covered burners under a glass ceramic panel |
SASO GSO EN 30-1-3 SASO GSO EN 30-1-3 |
Gas Fired Domestic Cookers | Testing of domestic cooking appliances burning gas having one or more burners with an automatic burner control system |
SASO GSO EN 30-1-4 SASO GSO EN 30-1-4 |
Gas Fired Domestic Cookers | Testing of appliances having forced-convection ovens and/or grills |
SASO GSO EN 30-1-2 SASO GSO EN 30-1-2 |
Gas Fired Domestic Cookers | Requirements and test method for the rational use of energy of gas cooking appliances having forced convection ovens and/or grills using combustible gases |
SASO GSO EN 30-2-2 SASO GSO EN 30-2-2 |
Gas Fired Domestic Cookers | Testing construction and performance characteristics as well as the requirements and methods of test for the safety and marking of freestanding and built-in domestic cooking appliances burning the combustible gases |
SASO GSO EN 30-1-1 SASO GSO EN 30-1-1 |
Gas Fired Domestic Cookers | Requirements and the test method for the rational use of energy of gas burning domestic cooking appliances |
SASO GSO EN 30-2-1 SASO GSO EN 30-2-1 |
Gas heated catering equipment | Gas heated catering equipment - General safety rules |
EN 203-1 EN 203-1 |
Gas Heated Catering Equipment | Gas heated catering equipment - Part 3: Materials and parts in contact with food and other sanitary aspects |
EN 203-3 EN 203-3 |
Gas, oil and solid-fuel burning appliances having electrical connections | Safety of household and similar electrical appliances and particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
EN IEC 60335-2-102:2006 EN IEC 60335-2-102:2006 |
General requirements for basic safety and essential performance of medical electrical equipment | Medical electrical equipment |
EN 60601-1 EN 60601-1 |
Glow-wire apparatus and common test procedure | This part of IEC 60695 specifies the glow-wire apparatus and common test procedure to simulate the effects of thermal stresses which may be produced by heat sources such as glowing elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. |
EN 60695-2-10:2013 EN 60695-2-10:2013 |
Grills, toasters and similar portable cooking appliances | Safety of household and similar electrical appliances and particular requirements for grills, toasters and similar portable cooking appliances |
EN 60335-2-9 EN 60335-2-9 |
Ground recessed luminaires | General requirements and tests of luminaires for ground recessed luminaires |
EN 60598-2-13 EN 60598-2-13 |
Handlamps | General requirements and tests of luminaires for handlamps |
EN 60598-2-8 EN 60598-2-8 |
Hardness testing | Destructive tests on welds in metallic materials - Hardness test on arc welded joints |
EN ISO 9015-1 EN ISO 9015-1 |
Heaters | Single burner gas-fired overhead radiant tube heaters for non-domestic use - Safety_x000d_ - Gas-fired central heating boilers - Assembly comprising a boiler body and a forced draught burner |
EN 416-2 EN 416-2 EN 416-1 EN 416-1 |
Hobs | Methods for measuring performance of household electric cooking appliances |
EN 60350-2 EN 60350-2 |
Hot water heaters for beverage | Gas heated catering equipment - Specific requirements - Hot water heaters for beverage |
EN 203-2-6 EN 203-2-6 |
Household and similar electrical appliances | General requirements relating to household and similar electrical appliances |
EN-IEC 60335-1:2012 EN-IEC 60335-1:2012 |
Impact tests | Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination |
EN ISO 9016 EN ISO 9016 |
Independent hotplates | Specification for dedicated liquified petroleum gas appliances independed hotplates. Including those incorporating a grill for outdoor use |
EN 484 EN 484 |
Instantaneous water heaters | Safety of household and similar electrical appliances and particular requirements for instantaneous water heaters |
EN IEC 60335-2-35:2003 EN IEC 60335-2-35:2003 |
Kitchen machines | Safety of household and similar electrical appliances and particular requirements for kitchen machines |
EN IEC 60335-2-14 EN IEC 60335-2-14 |
Lamp Controlgear | Lamp controlgear - Part 1: General and safety requirements |
EN 61347-1 EN 61347-1 |
Lap Shear Test | Adhesives —_x000d_ Determination of_x000d_ tensile lap-shear_x000d_ strength of bonded_x000d_ assemblies |
EN 1465:2009 EN 1465:2009 |
Liquefied petroleum gas appliances | Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances |
EN 521 EN 521 |
Luminaires | General requirements and tests of luminaires |
EN 60598-1 EN 60598-1 |
Luminaires for road and street lighting | General requirements and tests of luminaires for road and street lighting |
EN IEC 60598-2-3 EN IEC 60598-2-3 |
Luminaires for use in clinical areas of hospitals and health care buildings | General requirements and tests of luminaires for use in clinical areas of hospitals and health care buildings |
EN 60598-2-25 EN 60598-2-25 |
Luminaires with limited surface temperatures | General requirements and tests of luminaires for luminaires with limited surface temperatures |
EN IEC 60598-2-24 EN IEC 60598-2-24 |
Lumineires with built-in transformers for flament lamps | General requirements and tests of luminaires for lumineires with built-in transformers for flament lamps |
EN IEC 60598-2-6 EN IEC 60598-2-6 |
Macroscopic and microscopic examination of welds | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
EN ISO 17639 EN ISO 17639 |
Measurement of low power consumption | Electrical and electronic household and office equipment - Measurement of low power consumption |
EN 50564 EN 50564 |
Measurement of low power consumption | Electrical and electronic household and office equipment - Measurement of low power consumption |
IEC 62301 IEC 62301 |
Measuring method of the energy consumption of gas fired ovens | Measuring method of the energy consumption of gas fired ovens |
EN 15181 EN 15181 |
Metal Chimney Lab. | Thermal performance, gas leakage and condensation, rain water resistance testing of metal chimneys falling under EN 1856-1/-2. |
EN 1859 EN 1859 |
Method for the determination of the proof and the comparative tracking indices of solid insulating materials | This international standard specifies the method of test for the determination of the prof and comparative tracking indices of solid insulating meterials on pieces taken from parts of equipment and on plaques of material using alternating voltages. |
EN IEC 60112 EN IEC 60112 |
MT-Magnetic particle testing | Non-destructive testing of welds - Magnetic particle testing |
EN ISO 17638 EN ISO 17638 |
Multi Purpose Boiling Burners For Outdoor Use | Specification for dedicated liquefied petroleum gas appliances- Multi purpose boiling burners for outdoor use |
EN 497 EN 497 |
Open burners and wok burners | Gas heated catering equipment - Specific requirements - Open burners and wok burners |
EN 203-2-1 EN 203-2-1 |
Outdoor barbecues | Safety of household and similar electrical appliances and particular requirements for outdoor barbecues |
EN IEC 60335-2-78:2003 EN IEC 60335-2-78:2003 |
Ovens | Gas heated catering equipment - Specific requirements - Ovens |
EN 203-2-2 EN 203-2-2 |
Pasta cookers | Gas heated catering equipment - Specific requirements - Pasta cookers |
EN 203-2-11 EN 203-2-11 |
Peel and chisel testing | Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds_x000d_ - Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds |
EN ISO 10447 EN ISO 10447 EN ISO 14270 EN ISO 14270 |
Peel test (adhesively bonded reflective tape) | Peel, ageing, water immersion, salt spray tests and exposure resistances |
WSB-M11P56-A WSB-M11P56-A |
Portable general purpose luminaires | General requirements and tests of luminaires for portable general purpose luminaires |
EN 60598-2-4 EN 60598-2-4 |
Pressure Cookers | Domestic Use Pressure Cooker Safety Testing |
EN 12778 EN 12778 EN 12983-1 EN 12983-1 |
PT-Penetrant testing | Non-destructive testing - Penetrant testing |
EN ISO 3452-1 EN ISO 3452-1 |
Radiant Tube Heater | Multi- Burner gasfired radiant tube heater systems for non- Domestic use- Part 4: System H- Safety |
EN 777-4 EN 777-4 |
Radiant Tube Heater | Multi- Burner gas- Fired overhead radiant tube heater systems for non- Domestic use Part 1: System D- Safety |
EN 777-1 EN 777-1 |
Radiant Tube Heater | Multi- Burner- Gas- Fired overhead radiant tube heather systems for non- domestic use- Part 3: System F- Safety |
EN 777-3 EN 777-3 |
Radiant Tube Heater | Multi burner gas fired overhead radiant tube heather systems for non domestic use- Part 2: System E- Safety |
EN 777-2 EN 777-2 |
Range hoods and other cooking fume extractors | Safety of household and similar electrical appliances and particular requirements for range hoods and other cooking fume extractors |
EN IEC 60335-2-31:2003 EN IEC 60335-2-31:2003 |
Ranges, ovens, steam ovens and grills | Methods for measuring performance of household electric cooking appliances |
EN 60350-1 EN 60350-1 |
Recessed luminaires | General requirements and tests of luminaires for recessed luminaires |
EN IEC 60598-2-2 EN IEC 60598-2-2 |
Refrigerating Appliances, Ice-cream Appliances and Ice-makers | Safety of Household and similar electrical appliances -Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers |
EN 60335-2-24 EN 60335-2-24 |
Room heaters | Safety of household and similar electrical appliances and particular requirements for room heaters |
EN IEC 60335-2-30:2010 EN IEC 60335-2-30:2010 |
Rotating Electrical Machines | Rotating electrical machines -- Part 1: Rating and performance |
EN 60034-1 EN 60034-1 |
RT-Radiographic testing | Non-destructive testing of welds Radiographic testing_x000d_ X-ray techniques with film |
EN ISO 17636-1 EN ISO 17636-1 |
Salamanders and rotisseries | Gas heated catering equipment - Specific requirements - Salamanders and rotisseries |
EN 203-2-7 EN 203-2-7 |
Shavers, hair clippers and similar appliances | Safety of household and similar electrical appliances and particular requirements for shavers, hair clippers and similar |
EN 60335-2-8 EN 60335-2-8 |
Shear testing | Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds |
EN ISO 14273 EN ISO 14273 |
Solid tops, warming plates and griddles | Gas heated catering equipment - Specific requirements - Solid tops, warming plates and griddles |
EN 203-2-9 EN 203-2-9 |
Space Heaters | Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters) |
EN 449 EN 449 |
Space Heaters | Specifications for dedicated liquefied petroleum gas appliances-Flueless non-Domestic space heaters not exeeding 10 kW |
EN 461 EN 461 |
Stationary cooking ranges, hobs, ovens and similar appliances | Safety of household and similar electrical appliances and particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
EN 60335-2-6 EN 60335-2-6 |
Stop time measurement test | Calculation of the necessary safety distance between hazardous point and safety device |
EN ISO 13855 EN ISO 13855 |
Storage water heaters | Safety of household and similar electrical appliances and particular requirements for storage water heaters |
EN IEC 60335-2-21:2003 EN IEC 60335-2-21:2003 |
Structural adhesives | Structural adhesives - Testing of adhesively bonded joints - Bead peel test |
DIN 54457 DIN 54457 |
Tension testing | Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds_x000d_ - Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds |
EN ISO 17653 EN ISO 14272 EN ISO 17653 EN ISO 14272 |
Testing of Boilers | Gas-fired central heating boilers - Part 2-2: Specific standard for type B1 appliances |
EN 15502-2-2 EN 15502-2-2 |
Testing of Boilers | Gas-fired heating boilers - Part 1: General requirements and tests |
EN 15502-1 EN 15502-1 |
Testing of Boilers | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW |
EN 15502-2-1 EN 15502-2-1 |
Testing of Water Heaters | Gas-fired instantaneous water heaters for the production of domestic hot water |
EN 26 EN 26 |
Transverse tensile test | Destructive tests on welds in metallic materials - Transverse tensile test |
EN ISO 4136 EN ISO 4136 |
UT-Ultrasonic testing | Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment |
EN ISO 17640 EN ISO 17640 |
Vacuum cleaners and water-Suction cleaning appliances | Safety of household and similar electrical appliances and particular requirements for vacuum cleaners and water-Suction cleaning appliances |
EN 60335-2-2 EN 60335-2-2 |
VT-Visual testing | Non-destructive testing of welds - Visual testing of fusion-welded joints |
EN ISO 17637 EN ISO 17637 |
Warming plates and similar appliances | Safety of household and similar electrical appliances and particular requirements for warming plates and similar appliances |
EN 60335-2-12 EN 60335-2-12 |
Accredited: No
Capability | Description | Standard |
---|---|---|
Abdichtungsbahnen ‐ Teil 1: Bitumenbahnen für Dachabdichtungen; Bestimmung des Scherwiderstandes der Fügenähte |
DIN EN 12317-1 |
|
Abdichtungsbahnen ‐ Bestimmung der Maßhaltigkeit ‐ Teil 1: Bitumenbahnen für Dachabdichtungen |
DIN EN 1107-1 |
|
Abdichtungsbahnen ‐ Bestimmung des Schälwiderstandes der Fügenähte ‐ Teil 2: Kunststoff‐ und Elastomerbahnen für Dachabdichtungen |
DIN EN 12316-2 |
|
Abdichtungsbahnen ‐ Bitumen‐, Kunststoff und Elastomerbahnen für Dachabdichtungen ‐ Bestimmung der Wasserdampfdurchlässigkeit |
DIN EN 1931 |
|
Abdichtungsbahnen ‐ Definition und Eigenschaften von Unterdeck‐ und Unterspannbahnen ‐ Teil 2: Unterdeck‐ und Unterspannbahnen für Wände, (eingeschränkt auf: Anhang A, B, C) |
DIN EN 13859-2 |
|
Abdichtungsbahnen ‐ Kunststoff‐ und Elastomerbahnen für Dachabdichtungen ‐ Verhalten nach Lagerung auf Bitumen |
DIN EN 1548 |
|
Abdichtungsbahnen ‐ Kunststoff‐ und Elastomer‐Mauersperrbahnen ‐ Definition und Eigenschaften |
DIN EN 14909 |
|
Abdichtungsbahnen ‐ Teil 1: Bitumenbahnen für Dachabdichtungen; Bestimmung des Schälwiderstandes der Fügenähte |
DIN EN 12316-1 |
|
Abdichtungsbahnen ‐ Teil 1: Bitumenbahnen für Dachabdichtungen; Bestimmung des Zug‐Dehnungsverhaltens |
DIN EN 12311-1 |
|
Abdichtungsbahnen ‐ Unterdeck‐ und Unterspannbahnen für Dachdeckungen und Wände ‐ Bestimmung des Widerstandes gegen Wasserdurchgang |
DIN EN 13111 |
|
Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
GRI GS10 |
|
Aufsätze und Abdeckungen für Verkehrsflächen- Baugrundsätze Prüfungen, Kennzeichnung, Güteüberwachung |
DIN EN 124 |
|
Baugrund, Untersuchung von Bodenproben-Bestimmung der Korngrößenverteilung |
DIN 18123 |
|
Baugrund, Untersuchung von Bodenproben-Bestimmung der Korngrößenverteilung |
DIN 18127 |
|
Baugrund, Versuche und Versuchsgeräte ‐ Bestimmung des Wasseraufnahmevermögens |
DIN 18132 |
|
Baugrund; Untersuchung von Bodenproben – Bestimmung des Glühverlustes |
DIN 18128 |
|
Behälternetze und Stoffe für Konstruktionsarbeiten Spezifikation zur Durchführung und Testmethoden |
BS 7955 |
|
Bekanntmachung der Leitlinie für die Europäische Technische Zulassung für Abdichtungen für Wände und Böden in Nassräumen ‐ Teil 1: Flüssig aufzubringende Abdichtungen mit oder ohne Nutzschicht |
ETAG 022-1 Version 08/2007 |
|
Bekanntmachung der Leitlinie für die europäische technische Zulassung für Abdichtungen für Wände und Böden in Nassräumen ‐ Teil 2: Bausätze mit Abdichtungsbahnen |
ETAG 022-2 Version 09/2011 |
|
Bekanntmachung der Leitlinie für die europäische technische Zulassung für Abdichtungen für Wände und Böden in Nassräumen ‐ Teil 3: Bausätze mit wasserdichten Platten |
ETAG 022-3 Version 09/2011 |
|
Bestimmung Carboxylendgruppen (CEG) |
ASTM D 7409 |
|
Bestimmung der Biegeeigenschaft |
DIN EN ISO 178 |
|
Bestimmung der Biegsamkeit |
DIN EN 435 |
|
Bestimmung der Blähzahl der Tonmineralkomponente von Auskleidungen aus geosynthetischem Ton |
ASTM D 5890 |
|
Bestimmung der Dicke und der flächenbezogenen Masse ‐ Teil 2: Kunststoff‐ und Elastomerbahnen für Dachabdichtungen |
DIN EN 1849-2 |
|
Bestimmung der Dicke und flächenbezogenen Masse ‐ Teil 1: Bitumenbahnen für Dachabdichtungen |
DIN EN 1849-1 |
|
Bestimmung der Dicke unter festgelegten Drücken – Teil 2: Verfahren zur Bestimmung der Dicke der Einzellagen von mehrlagigen Produkten |
DIN EN ISO 9863-2 |
|
Bestimmung der Druckspannungs- Verformungseigenschaften Teil 1. Materialien mit hoher Dichte |
DIN EN ISO 3386-2 |
|
Bestimmung der Druckspannungs- Verformungseigenschaften Teil 1. Materialien mit niedriger Dichte |
DIN EN ISO 3386-1 |
|
Bestimmung der Gasdurchlässigkeit von Kunststofffolien |
ASTM D 1434 |
|
Bestimmung der Gesamtdicke |
DIN EN 428 |
|
Bestimmung der Härte Teil 1: Kugeleindruckversuch |
DIN EN ISO 2039-1 |
|
Bestimmung der Länge und Breite |
DIN EN 822 |
|
Bestimmung der Länge, Breite und Geradheit ‐ Teil 1: Bitumenbahnen für Dachabdichtungen |
DIN EN 1848-1 |
|
Bestimmung der Länge, Breite, Geradheit und Planlage ‐ Teil 2: Kunststoff‐ und Elastomerbahnen für Dachabdichtungen |
DIN EN 1848-2 |
|
Bestimmung der Luftdurchlässigkeit von textilen Flächengebilden |
DIN EN ISO 9237 |
|
Bestimmung der Maßänderung und Schlüsselung nach Wärmeeinwirkung |
DIN EN 434 |
|
Bestimmung der Maßhaltigkeit ‐ Teil 2: Kunststoff‐ und Elastomerbahnen für Dachabdichtungen |
DIN EN 1107-2 |
|
Bestimmung der Nahtfestigkeit |
DIN EN 684 |
|
Bestimmung der Plattenmaße Teil 1: Bestimmung der Dicke |
DIN EN 324 |
|
Bestimmung der Porenvolumenverteilung und der spezifischen Oberfläche von Feststoffen durch Quecksilberintrusion |
DIN 66133 |
|
Bestimmung der Verformung bei definierter Druck- und Temperaturbeanspruchung (1 Auflast, 48h, 23°C) |
DIN EN 1605 |
|
Bestimmung der Wasserdampfdurchlässigkeit Gravimetrisches (Schalen)-Verfahren |
ISO 2528 |
|
Bestimmung der Wasserdurchlässigkeit normal zur Ebene unter Auflast bei konstantem hydraulischen Höhenunterschied |
DIN 60500-4 |
|
Bestimmung der Zugfestigkeit (Druckfestigkeit) |
DIN EN 196-1 |
|
Bestimmung der Zugfestigkeit senkrecht zur Plattenebene |
DIN EN 1607 |
|
Bestimmung des Gehaltes an nichtflüchtigen Anteilen |
DIN EN ISO 3251 |
|
Bestimmung des Schwindens und Quellens an kleinen Probekörpern |
DIN 52450 |
|
Bestimmung des Stempeldurchdrückwiderstandes |
NF G38-019 |
|
Bestimmung des Verhaltens beim Falzen bei tiefen Temperaturen ‐ Teil 5: Kunststoff‐ und Elastomerbahnen für Dachabdichtungen |
DIN EN 495-5 |
|
Bestimmung des Wasserdurchlässigkeitsbeiwerts bei radialer Durchströmung in der Ebene |
DIN 60500-8 |
|
Bestimmung des Zug-Dehnungsverhaltens; Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen |
DIN EN 12311-2 |
|
Bestimmung Molmasse |
ASTM D 4603 |
|
Bestimmung sichtbarer Mängel ‐ Teil 1: Bitumenbahn für Dachabdichtungen |
DIN EN 1850-1 |
|
Bestimmung sichtbarer Mängel ‐ Teil 2: Kunststoff‐ und Elastomerbahnen für Dachabdichtungen |
DIN EN 1850-2 |
|
Bindemittelprüfung – Prüfung von Bindetonen (eingeschränkt auf: Abschnitt 4 Bestimmung des Methylenblauwertes (Tüpfelmethode)) |
VDG – Merkblatt P 69 |
|
Bitumen‐, Kunststoff‐ und Elastomerbahnen für Dachabdichtungen ‐ Bestimmung des Widerstandes gegen Wurzelpenetration |
DIN EN 13948 |
|
Bitumen‐, Kunststoff‐ und Elastomerbahnen für Dachabdichtungen ‐ Verfahren zur künstlichen Alterung bei kombinierter Dauer‐beanspruchung durch UV‐Strahlung, erhöhte Temperatur und Wasser |
DIN EN 1297 |
|
Bitumen-, Kunststoff- und Elastomerbahnen für Dachabdichtungen Bestimmung der Wasserdichtheiten Verfahren A und B |
DIN EN 1928 |
|
Bitumen‐, Kunststoff‐ und Elastomerbahnen für Dachabdichtungen ‐Bestimmung des Widerstandes gegen statische Belastung |
DIN EN 12730 |
|
Bitumen‐, Kunststoff‐ und Elastomerbahnen für Dachabdichtungen ‐Bestimmung des Widerstandes gegen stoßartige Belastung |
DIN EN 12691 |
|
Bitumen-, Kunststoff- und Elastomerbahnen für Dachabdichtungen Verfahren zur künstlichen Alterung bei Dauerbeanspruchung durch erhöhter Temperatur |
DIN EN 1296 |
|
Bitumenbahnen für Dachabdichtungen ‐ Teil 1: Bestimmung des Weiterreißwiderstandes (Nagelschaft) |
DIN EN 12310-1 |
|
Bitumenbahnen für Dachabdichtungen Bestimmung des Kaltbiegeverhaltens |
DIN EN 1109 |
|
Bitumenbahnen für die Bauwerkabdichtung gegen Bodenfeuchte und Wasser; Definition und Eigenschaften |
DIN EN 13969 |
|
Bitumenbahnen mit Trägereinlagen für Dachabdichtungen;Definition und Eigenschaften |
DIN EN 13707 |
|
Bitumen-Dampfsperrbahnen-Definition und Eigenschaften |
DIN EN 13970-A1 |
|
Bitumen-Mauersperrbahnen; Definition und Eigenschaften |
DIN EN 14967 |
|
Brandverhalten von Baustoffen und Bauteilen- Teil 2: Baustoffe B2 |
DIN 4102-2 |
|
Brandverhalten von Baustoffen und Bauteilen; Teil 1: Baustoffe ‐ Bauteile, Begriffe, Anforderungen und Prüfungen; Klasse B2 |
DIN 4102-1 |
|
Chemische Beständigkeit |
NRW/ BAM Methode |
|
Dachabdichtungen - Abdichtungen für nicht genutzte Dächer Teil 3: Bemessung, Verarbeitung der Stoffe, Ausführung der Dachabdichtungen |
DIN 18531-3 |
|
Definition und Eigenschaften von Unterdeck‐ und Unterspannbahnen ‐ Teil 1: Unterdeck‐ und Unterspannbahnen für Dachdeckungen, (eingeschränkt auf: Anhang A, B, C, F) |
DIN EN 13859-1 |
|
Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus |
ASTM D 4355 |
|
Determining apparent opening size of a geotextile |
ASTM D 4751 |
|
Determining the (in-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 4716 |
|
Dynamische Belastung mit einer maximalen Durchbiegung von L/360 |
Documented In-House Method |
|
Dynamische Differenz- Thermoanalyse (DSC) Teil 1: Allgemeine Grundlagen |
DIN EN ISO 11357-1 |
|
Eigenschaften, die für die Anwendung beim Bau von Deponien, Zwischenlagern und Auffangbecken für feste Abfallstoffe erforderlich sind |
DIN EN 13493 |
|
Eigenschaften, die für die Anwendung beim Bau von Deponien, Zwischenlagern und Auffangbecken für flüssige Abfallstoffe erforderlich sind |
DIN EN 13492 |
|
Eigenschaften, die für die Anwendung beim Bau von Tunneln und Tiefbauwerken erforderlich sind |
DIN EN 13491 |
|
Eigenschaften, die für die Anwendung in Verkehrsbauten erforderlich sind |
DIN EN 15382 |
|
Elastomere oder thermoplastische Elastomere ‐ Bestimmung des Weiterreißwiderstandes ‐ Teil 1: Streifen‐, winkel‐ und bogenförmige Probekörper |
DIN ISO 34-1 |
|
Empfehlungen zur Planung und Bau von Verkehrsflächen auf Bauwerken ‐ Anhang 2: Prüfung der Schutzwirksamkeit von Schutzschichten/‐lagen in Anlehnung an DIN EN 13719 |
FLL Methode |
|
erfahren zur Bestimmung Der Dichte von nicht verschäumten Kunststoffen Teil 2: Verfahren mit Dichtegradientensäule |
DIN EN ISO 1183-2 |
|
Ermittlung des Abminderungsfaktor A5 |
E EBGEO |
|
Fluid loss volume |
ASTM D 5891 |
|
Flüssig zu verarbeitende wasserundurchlässige Produkte im Verbund mit keramischen Fliesen‐ und Plattenbelägen ‐Anforderungen, Prüfverfahren, Konformitätsbewertung, Klassifizierung und Bezeichnung |
DIN EN 14891 |
|
Fördergurte- Bestimmung der Festigkeit mechanischer Verbindungen Statisches Prüfverfahren |
DIN EN ISO 1120 |
|
Fördergurte- Lagenhaftung zwischen den Bestandteilen |
DIN EN ISO 252 |
|
Geforderte Eigenschaften für die Anwendung beim Bau von Rückhaltebecken und Staudämmen |
DIN EN 13254 |
|
Geokunststoffe ‐ Allgemeine Prüfverfahren zur Bewertung nach Beständigkeitsprüfungen |
DIN EN 12226 |
|
Geokunststoffe ‐ Auswahlprüfung zur Bestimmung der chemischen Beständigkeit bei der Anwendung in Deponien |
DIN EN 14414 |
|
Geokunststoffe ‐ Bestimmung der Berstdruckfestigkeit |
DIN EN 14151 |
|
Geokunststoffe ‐ Bestimmung der Berstdruckfestigkeit |
DIN 61551 |
|
Geokunststoffe ‐ Bestimmung der Dicke unter festgelegten Drücken ‐ Teil 1: Einzellagen |
DIN EN ISO 9863-1 |
|
Geokunststoffe ‐ Bestimmung der Reibungseigenschaften – Teil 1: Scherkastenversuch |
DIN EN ISO 12957-1 |
|
Geokunststoffe ‐ Bestimmung der Reibungseigenschaften – Teil 2: Schiefe‐Ebene‐Versuch |
DIN EN ISO 12957-2 |
|
Geokunststoffe ‐ Bestimmung der Schutzwirksamkeit eines Geokunststoffes bei Stoßbelastung |
DIN EN ISO 13428 |
|
Geokunststoffe ‐ Bestimmung des Druckverhaltens – Teil 1: Eigenschaften des Druckkriechens |
DIN EN ISO 25619-1 |
|
Geokunststoffe ‐ Bestimmung des Druckverhaltens – Teil 2: Bestimmung des Kurzzeit‐ Druckverhaltens |
DIN EN ISO 25619-2 |
|
Geokunststoffe ‐ Bestimmung des Pyramidendurchdrückwiderstandes von Geokunststoffen auf harter Unterlage |
DIN EN 14574 |
|
Geokunststoffe ‐ Dynamischer Durchschlagversuch (Kegelfallversuch) |
DIN EN ISO 13433 |
|
Geokunststoffe ‐ Probenahme und Vorbereitung der Messproben |
DIN EN ISO 9862 |
|
Geokunststoffe ‐ Prüfverfahren zur Bestimmung der flächenbezogenen Masse von geosynthetischen Tondichtungsbahnen |
DIN EN 14196 |
|
Geokunststoffe ‐ Stempeldurchdrückversuch (CBR‐Versuch) |
DIN EN ISO 12236 |
|
Geokunststoffe ‐ Zugprüfung von Verbindungen/Nähten am breiten Streifen |
DIN EN ISO 10321 |
|
Geokunststoffe ‐ Zugversuch am breiten Streifen |
DIN EN ISO 10319 |
|
Geosynthetische Dichtungsbahnen ‐ Bestimmung der Flüssigkeitsdurchlässigkeit |
DIN EN 14150 |
|
Geosynthetische Dichtungsbahnen ‐ Orientierungsprüfung zur Bestimmung der Oxidationsbeständigkeit |
DIN EN 14575 |
|
Geosynthetische Dichtungsbahnen ‐ Prüfverfahren zur Bestimmung der Beständigkeit gegen Auslaugen |
DIN EN 14415 |
|
Geosynthetische Dichtungsbahnen ‐ Prüfverfahren zur Bestimmung des Einflusses von Frost‐Tau‐Wechselbeanspruchungen auf die Durchlässigkeit von geosynthetischen Tondichtungsbahnen |
DIN CEN/TS 14418 |
|
Geosynthetische Dichtungsbahnen ‐ Prüfverfahren zur Bestimmung des Einflusses von Nass‐Trocken‐Wechselbeanspruchungen auf die Durchlässigkeit von geosynthetischen Tondichtungsbahnen |
DIN CEN/TS 14417 |
|
Geosynthetische Dichtungsbahnen ‐ Prüfverfahren zur Bestimmung des Widerstandes gegen Wurzeln |
DIN CEN/TS 14416 |
|
Geosynthetische Dichtungsbahnen - Eigenschaften, die für die Anwendung beim Bau von Kanälen erforderlich sind |
DIN EN 13362 |
|
Geosynthetische Dichtungsbahnen - Eigenschaften, die für die Anwendung beim Bau von Rückhaltebecken und Staudämmen erforderlich sind |
DIN EN 13361 |
|
Geosynthetische Tondichtungsbahnen ‐ Bestimmung der Wasseraufnahme von Bentonit |
DIN EN ISO 10769 |
|
Geosynthetische Tondichtungsbahnen (GBR-C) Bestimmung der Gasdurchlässigkeit |
DIN EN ISO 10773 |
|
Geotextilien und geotextilverwandte Produkte – Auswahlprüfverfahren zur Bestimmung der Oxidationsbeständigkeit |
DIN EN ISO 13438 |
|
Geotextilien und geotextilverwandte Produkte ‐ Auswahlverfahren zur Bestimmung der Beständigkeit gegen Säure und alkalische Flüssigkeiten |
DIN EN 14030 |
|
Geotextilien und geotextilverwandte Produkte ‐ Auswahlverfahren zur Bestimmung der Hydrolysebeständigkeit in Wasser |
DIN EN 12447 |
|
Geotextilien und geotextilverwandte Produkte ‐ Bestimmung der charakteristischen Öffnungsweite |
DIN EN ISO 12956 |
|
Geotextilien und geotextilverwandte Produkte ‐ Bestimmung der langfristigen Schutzwirksamkeit von Geotextilien im Kontakt mit geosynthetischen Dichtungsbahnen |
DIN EN 13719 |
|
Geotextilien und geotextilverwandte Produkte ‐ Bestimmung der Wasserdurchlässigkeit normal zur Ebene, ohne Auflast |
DIN EN ISO 11058 |
|
Geotextilien und geotextilverwandte Produkte ‐ Bestimmung der Witterungsbeständigkeit |
DIN EN 12224 |
|
Geotextilien und geotextilverwandte Produkte ‐ Bestimmung des Herausziehwiderstandes aus dem Boden |
DIN EN 13738 |
|
Geotextilien und geotextilverwandte Produkte ‐ Bestimmung des Wasserableitvermögens in der Ebene |
DIN EN ISO 12958 |
|
Geotextilien und geotextilverwandte Produkte ‐ Bestimmung des Widerstandes gegen Wasserdurchtritt (Wassersäule‐ Prüfverfahren) |
DIN EN 13562 |
|
Geotextilien und geotextilverwandte Produkte ‐ Bestimmung des Zugkriech‐ und des Zeitstandbruchverhaltens |
DIN EN ISO 13431 |
|
Geotextilien und geotextilverwandte Produkte ‐ Eigenschaften, die für die Anwendung beim Bau von Fahrbahndecken und Asphaltdeckschichten erforderlich sind |
DIN EN 15381 |
|
Geotextilien und geotextilverwandte Produkte ‐ Festigkeit produktinterner Verbindungen ‐ Teil 1: Geozellen |
DIN EN ISO 13426-1 |
|
Geotextilien und geotextilverwandte Produkte ‐ Festigkeit produktinterner Verbindungen ‐ Teil 2: Geoverbundstoffe |
DIN EN ISO 13426-2 |
|
Geotextilien und geotextilverwandte Produkte ‐ Geforderte Eigenschaften für die Anwendung beim Bau von Rückhaltebecken und Staudämmen Anhang B (normativ) Aspekte der Dauerhaftigkeit |
DIN EN 13254 |
|
Geotextilien und geotextilverwandte Produkte ‐ Geforderte Eigenschaften für die Anwendung beim Bau von Straßen und sonstigen Verkehrsflächen Anhang B (normativ) Aspekte der Dauerhaftigkeit |
DIN EN 13249 |
|
Geotextilien und geotextilverwandte Produkte ‐ Geforderte Eigenschaften für die Anwendung beim Eisenbahnbau Anhang B (normativ) Aspekte der Dauerhaftigkeit |
DIN EN 13250 |
|
Geotextilien und geotextilverwandte Produkte ‐ Geforderte Eigenschaften für die Anwendung beim Kanalbau Anhang B (normativ) Aspekte der Dauerhaftigkeit |
DIN EN 13255 |
|
Geotextilien und geotextilverwandte Produkte ‐ Geforderte Eigenschaften für die Anwendung im Erd‐ und Grundbau sowie in Stützbauwerken Anhang B (normativ) Aspekte der Dauerhaftigkeit |
DIN EN 13251 |
|
Geotextilien und geotextilverwandte Produkte ‐ Geforderte Eigenschaften für die Anwendung im Tunnelbau und in Tiefbauwerken Anhang B (normativ) Aspekte der Dauerhaftigkeit |
DIN EN 13256 |
|
Geotextilien und geotextilverwandte Produkte ‐ Geforderte Eigenschaften für die Anwendung in Deponien für feste Abfallstoffe Anhang B (normativ) Aspekte der Dauerhaftigkeit |
DIN EN 13257 |
|
Geotextilien und geotextilverwandte Produkte ‐ Geforderte Eigenschaften für die Anwendung in Dränanlagen Anhang B (normativ) Aspekte der Dauerhaftigkeit |
DIN EN 13252 |
|
Geotextilien und geotextilverwandte Produkte ‐ Geforderte Eigenschaften für die Anwendung in Erosionsschutzanlagen (Küstenschutz, Deckwerksbau) Anhang B (normativ) Aspekte der Dauerhaftigkeit |
DIN EN 13253 |
|
Geotextilien und geotextilverwandte Produkte ‐ Geforderte Eigenschaften für die Anwendung in Projekten zum Einschluss flüssiger Abfallstoffe Anhang B (normativ) Aspekte der Dauerhaftigkeit |
DIN EN 13265 |
|
Geotextilien und geotextilverwandte Produkte ‐ Prüfverfahren zur Bestimmung der mikrobiologischen Beständigkeit durch einen Erdeingrabungsversuch |
DIN EN 12225 |
|
Geotextilien und geotextilverwandte Produkte ‐ Simulation von Scheuerbeschädigungen (Gleitblockprüfung) |
DIN EN ISO 13427 |
|
Geotextilien und geotextilverwandte Produkte ‐ Verfahren zum Einbau und Ausgraben von Proben und Prüfung von Messproben im Labor |
DIN EN ISO 13437 |
|
Geotextilien und geotextilverwandte Produkte ‐Identifikation auf der Baustelle |
DIN EN ISO 10320 |
|
Identifikation auf der Baustelle |
DIN EN ISO 10320 |
|
Indexprüfung zur Bewertung von mechanischen Schäden bei wiederholter Belastung ‐ Beschädigung durch körnige Materialien |
DIN EN ISO 10722 |
|
Individual Geogrid Junction Strength |
GRI GG2 |
|
Keramische Fliesen und Platten Teil 3. Bestimmung von Wasseraufnahme, offener Porosität, scheinbarer relativer Dichte und Rohdichte |
DIN EN ISO 10545-3 |
|
Klassifizierg. Von Bauprodukten und Bauarten zu ihrem Brandverhalten; Teil 1: Klassif. mit den Ergebnissen aus den Prüfungen zum Brandverhalten von Bauprodukten |
DIN EN 13501-1 |
|
Klebstoffe ‐ Bestimmung der Zugscherfestigkeit von Überlappungsklebungen |
DIN EN 1465 |
|
Künstliches Bestrahlen oder Bewittern in Geräten: Teil 3: UV- Leuchtstofflampen |
DIN EN ISO 4892-3 |
|
Kunststoff‐ und Elastomerbahnen für Dachabdichtungen ‐ Bestimmung der Einwirkungen von Flüssigchemikalien, einschließlich Wasser |
DIN EN 1847 |
|
Kunststoff‐ und Elastomerbahnen für Dachabdichtungen ‐ Teil 2: Bestimmung des Scherwiderstandes der Fügenähte |
DIN EN 12317-2 |
|
Kunststoff‐ und Elastomerbahnen für Dachabdichtungen ‐ Teil 2: Bestimmung des Widerstandes gegen Weiterreißen |
DIN EN 12310-2 |
|
Kunststoff‐ und Elastomerbahnen für die Bauwerksabdichtung gegen Bodenfeuchte und Wasser ‐ Definition und Eigenschaften |
DIN EN 13967 |
|
Kunststoff‐ und Elastomer‐Dampfsperrbahnen ‐ Definition und Eigenschaften |
DIN EN 13984 |
|
Kunststoffbahnen – Prüfungen |
DIN 16726 |
|
Kunststoffe ‐ Bestimmung der Asche – Teil 1: Allgemeine Grundlagen |
DIN EN ISO 3451-1 |
|
Kunststoffe ‐ Bestimmung der Druckeigenschaften |
DIN EN ISO 604 |
|
Kunststoffe ‐ Bestimmung der Wasseraufnahme |
DIN EN ISO 62 |
|
Kunststoffe ‐ Bestimmung der Zugeigenschaften – Teil 1: Allgemeine Grundsätze |
DIN EN ISO 527-1 |
|
Kunststoffe ‐ Bestimmung der Zugeigenschaften – Teil 2: Prüfbedingungen für Form‐ und Extrusionsmassen, Änderung der Zugfestigkeit |
DIN EN ISO 527-2 |
|
Kunststoffe ‐ Bestimmung der Zugeigenschaften – Teil 3: Prüfbedingungen für Folien und Tafeln |
DIN EN ISO 527-3 |
|
Kunststoffe ‐ Bestimmung der Zugeigenschaften – Teil 4: Prüfbedingungen für isotrop und anisotrop faserverstärkte Kunststoffverbundwerkstoffe |
DIN EN ISO 527-4 |
|
Kunststoffe ‐ Bestimmung der Zugeigenschaften – Teil 5: Prüfbedingungen für unidirektional faserverstärkte Kunststoffverbundwerkstoffe |
DIN EN ISO 527-5 |
|
Kunststoffe ‐ Dynamische Differenz‐Thermoanalyse (DSC) – Teil 3: Bestimmung der Schmelz‐ und Kristallisationstemperatur und der Schmelz‐ und Kristallisationsenthalpie |
DIN EN ISO 11357-3 |
|
Kunststoffe ‐ Dynamische Differenz‐Thermoanalyse (DSC) – Teil 6: Bestimmung der Oxidations‐Induktionszeit (isothermische OIT) und oder Oxidations‐Induktionstemperatur (dynamische OIT) |
DIN EN ISO 11357-6 |
|
Kunststoffe ‐ Folien und Bahnen ‐ Bestimmung der Reißfestigkeit ‐ Teil 1: Hosenreiß‐Verfahren |
DIN EN ISO 6383-1 |
|
Kunststoffe- und Elastomerbahnen für Dachabdichtungen; Definition und Eigenschaften |
DIN EN 13956 |
|
Kunststoffe- und Elsatomerbahnen für die Bauwerksabdichtung gegen Bodenfeuchte und Wasser; Definition und Eigenschaften |
DIN EN 13967 |
|
Leitfaden für die Bestimmung der Langzeit‐Festigkeit von Geokunststoffen zur Bodenbewehrung |
ISO/TR 20432 |
|
Leitlinie für europäische technische Zulassungen für außenseitige Wärmedämm‐Verbundstoffe mit Putzschicht Abschnitt |
ETAG 004 |
|
Maschenweite & Strangbreite |
FGSV TL Geok E-StB |
|
Merkblatt über die Anwendung von Geokunststoffen im Erdbau des Straßenbaues; mit Checklisten (C Geok E) |
M GEOK E |
|
Messung der Indexdurchflußrate durch Proben von Auskleidungen aus gesättigtem geosynthetischem Ton unter Verwendung eines Permeameters mit flexiblen Wänden |
ASTM D 5887 |
|
Mit Kautschuk oder Kunststoff beschichtete Textilien ‐ Bestimmung der Haftfestigkeit von Beschichtungen |
DIN EN ISO 2411 |
|
Mit Kautschuk oder Kunststoff beschichtete Textilien ‐ Bestimmung der Rollencharakteristik ‐ Teil 1: Bestimmung der Länge, Breite und Nettomasse |
DIN EN ISO 2286-1 |
|
Mit Kautschuk oder Kunststoff beschichtete Textilien ‐ Bestimmung der Rollencharakteristik ‐ Teil 2: Bestimmung der flächenbezogenen Gesamtmasse, der flächenbezogenen Masse der Beschichtung und der flächenbezogenen Masse des Trägers |
DIN EN ISO 2286-2 |
|
Mit Kautschuk oder Kunststoff beschichtete Textilien ‐ Bestimmung der Rollencharakteristik ‐ Teil 3: Bestimmung der Dicke |
DIN EN ISO 2286-3 |
|
Mit Kautschuk oder Kunststoff beschichtete Textilien ‐ Bestimmung der Zugfestigkeit und der Bruchdehnung |
DIN EN ISO 1421 |
|
Mörtel und Klebstoffe für Fliesen und Platten ‐ Bestimmung der Haftfestigkeit zementhaltiger Mörtel für innen und außen |
DIN EN 1348 |
|
Mörtel und Klebstoffe für Fliesen und Platten Anforderung, Konformitätsbewertung, Klassifizierung und Bezeichnung |
DIN EN 12004 |
|
Mörtel und Klebstoffe für Fliesen und Platten Bestimmung der Benetzungsfähigkeit |
DIN EN 1347 |
|
Non‐reinforcing hexagonal geogrid for the stabilization of unbound granular layers by way of interlock with aggregate |
TR 41 |
|
Nordic system for the certification and specification of geosynthetics and geosynthetic‐related products (eingeschränkt auf: Anhang H, Test procedure for the determination of the dimensions) |
NorGeoSpec |
|
Normprüfverfahren für die Bestimmung der Verankerungskraft zwischen geosynthetischen Bewehrungselementen und segmentierten Betonblöcken |
ASTM D 6638 |
|
Normprüfverfahren zu Bestimmung der Reißfestigkeit von Geotextilien (Trapezverfahren) |
ASTM D 4533 |
|
Normprüfverfahren zur Bestimmung der Bruchfestigkeit und Dehnung von Geotextilien |
ASTM D 4632M |
|
Normprüfverfahren zur Bestimmung der Dicke bei Geokunststoffen |
ASTM D 5199 |
|
Normprüfverfahren zur Bestimmung der flächenbezogenen Masse von Geotextilien |
ASTM D 5261 |
|
Normprüfverfahren zur Bestimmung der flächenbezogenen Masse von Geweben |
ASTM D 3776Ma |
|
Normprüfverfahren zur Bestimmung der Nahtfestigkeit von Geotextilien |
ASTM D 4884Ma |
|
Normprüfverfahren zur Bestimmung der Reißfestigkeit und Dehnung an technischen Textilien (Streifenzugversuch) |
ASTM D 5035 |
|
Normprüfverfahren zur Bestimmung der Stempeldurchdrückkraft an Geomembranen und geomembranverwandten Produkten |
ASTM D 4833M |
|
Normprüfverfahren zur Bestimmung der Verbindungsfestigkeit zwischen den beiden Geotextillagen einer geosynthetischen Tondichtungsbahn |
ASTM D 6496a |
|
Normprüfverfahren zur Bestimmung der Wasserdurchlässigkeit von Geotextilien |
ASTM D 4491a |
|
Normprüfverfahren zur Bestimmung der Zugfestigkeit von Geotextilien am breiten Streifen |
ASTM D 4595 |
|
Normprüfverfahren zur Bestimmung der Zugverhaltens von Geogittern (Einzel‐ oder Mehrfachstrangzugversuch) |
ASTM D 6637 |
|
Normprüfverfahren zur Bestimmung des Druckkriechverhaltens an Geokunststoffen, basierend auf Versuchen mit in stufen steigenden Temperaturen und anschließender Superposition |
ASTM D 7361 |
|
Normprüfverfahren zur Bestimmung des Reibungsverhaltens zwischen Boden und Geokunststoff (Direkter Scherversuch) |
ASTM D 5321M |
|
Normprüfverfahren zur Bestimmung des Zugkriech‐ und Zeitstandbruchverhalten an Geokunststoffen |
ASTM D 5262 |
|
Normprüfverfahren zur Bestimmung des Zugkriech‐ und Zeitstand‐bruchverhalten an Geokunststoffen, basierend auf Versuchen mit in stufen steigenden Temperaturen und anschließender Superposition |
ASTM D 6992 |
|
Normprüfverfahren zur Bestimmung des Zugverhaltens von Geogittern am Einzelstrang |
GRI GG1 |
|
Polyvinylchlorid-Bodenbeläge zur Anwendung in besonderen Nassräumen Spezifikation |
DIN EN 13533 |
|
Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken Prüfverfahren- Messung der Haftfestigkeit im Abreißversuch |
DIN EN 1542 |
|
Prüfen von Fügeverbindungen an Dichtungsbahnen aus polymeren Werkstoffen ‐ Schälversuch |
DVS 2226-3 |
|
Prüfen von Fügeverbindungen an Dichtungsbahnen aus polymeren Werkstoffen ‐ Zugscherversuch |
DVS 2226-2 |
|
Prüfen von Schweißverbindungen an Tafeln und Rohren aus thermoplatischen Kunststoffen ‐ Technologischer Biegeversuch |
DVS 2203-5 |
|
Prüfen von Schweißverbindungen aus thermoplastischen Kunststoffen ‐ Teil 1: Biegeversuch |
DIN EN 12814-1 |
|
Prüfen von Schweißverbindungen aus thermoplastischen Kunststoffen ‐ Teil 2: Zugversuch |
DIN EN 12814-2 |
|
Prüfen von Schweißverbindungen aus thermoplastischen Kunststoffen ‐ Teil 4: Schälversuch |
DIN EN 12814-4 |
|
Prüfgrundsätze zur Erteilung von allgemeinen bauaufsichtlichen Prüfzeugnissen für Abdichtungen im Verbund mit Fliesen- und Plattenbelägen - Teil 1: Flüssig zu verarbeitende Verbundabdichtungen (PG AIV-F) |
PG AIV -F |
|
Prüfgrundsätze zur Erteilung von allgemeinen bauaufsichtlichen Prüfzeugnissen für Abdichtungen im Verbund mit Fliesen- und Plattenbelägen - Teil 2: Bahnenförmige Abdichtungsstoffe (PG AIV-B) |
PG AIV -B |
|
Prüfgrundsätze zur Erteilung von allgemeinen bauaufsichtlichen Prüfzeugnissen für Abdichtungen im Verbund mit Fliesen- und Plattenbelägen - Teil 3: Plattenförmige Abdichtungsstoffe (PG AIV-P) |
PG AIV -P |
|
Prüfung anorganischer nichtmetallischer Werkstoffe- Verschleißprüfung mit der Schleifscheibe nach Böhme- Schleifscheiben-Verfahren |
DIN 52108:2010-05 |
|
Prüfung der Durchstanzung |
FDF Merkblatt |
|
Prüfung der Rissüberbrückung |
FDF Merkblatt |
|
Prüfung von Festbeton; Teil 8: Wassereindringtiefe unter Druck |
DIN CEN/TS 12390-8 |
|
Prüfung von Kernverbunden, Biegeversuch |
DIN 53293 |
|
Prüfung von Kunstleder – Zugversuch (zurückgezogene Norm) |
DIN 53354 |
|
Prüfung von Kunststoff‐Folien ‐ Bestimmung der Dicke durch mechanische Abtastung |
DIN 53370 |
|
Prüfung von Kunststoff‐Folien ‐ Bestimmung der Maßänderung |
DIN 53377 |
|
Prüfung von Kunststoff‐Folien ‐ Weiterreißversuch an trapezförmigen Proben mit Einschnitt |
DIN 53363 |
|
Prüfung von Textilien ‐ Bestimmung der Sauggeschwindigkeit von textilen Flächengebilden gegenüber Wasser (Steighöhenverfahren) |
DIN 53924 |
|
Prüfung von Textilien; Bestimmung des Wasseraufnahmevermögens von textilen Flächengebilden |
DIN 53923 |
|
Prüfungen zum Brandverhalten- Endzündbarket bei direkter Flammeneinwirkung Teil 2: Einflammentest |
DIN EN ISO 11925-2 |
|
Prüfverfahren für Estrichmörtel und Estrichmassen; Teil 3: Bestimmung des Verschleißwiderstandes nach Böhme |
DIN EN 13892-3 |
|
Prüfverfahren für hydraulisch erhärtende Boden‐Spachtelmassen ‐Bestimmung der Biegezug‐ und Druckfestigkeit |
SN EN 13851 |
|
Prüfverfahren zur Bestimmung der Beständigkeit von geosynthetischen Kunststoffdichtungsbahnen gegen umweltbedingte Spannungsrissbildung |
DIN EN 14576 |
|
Prüfverfahren zur Bestimmung der flächenbezogenen Masse von Geotextilien und geotextilverwandten Produkten |
DIN EN ISO 9864 |
|
Prüfverfahren zur Bestimmung des Einflusses von Frost-Tau- Wechselbeanspruchung auf die Durchlässigkeit von geosynthetischen Tondichtungsbahnen |
DIN CEN/TS |
|
Raumabschließende Bauteile aus textilen Flächengebilden und Folien (Zeltplanen) für Hallen und Zelte ‐ Teil 1: PVC - beschichtetes Polyestergewebe |
DIN 18204-1 |
|
Reibungsverhalten von Geokunststoffen |
GDA E3-8 |
|
Richtlinie für die Prüfung von Geotextilien im Verkehrswasserbau, Abriebbeständigkeit |
BAW RPG |
|
Richtlinie über Deponiebasisabdichtungen aus Dichtungsbahnen: Abschnitt 5.2.1.5 Witterungsverhalten, Abschnitt 5.2.2 chemische Prüfungen, Abschnitt 5.2.3 biologische Prüfungen |
NRW Richtlinie |
|
Richtlinie über Deponiebasisabdichtungen aus Dichtungsbahnen: Abschnitt 5.2.1.5 Witterungsverhalten, Abschnitt 5.2.2 chemische Prüfungen, Abschnitt 5.2.3 biologische Prüfungen |
NRW Richtlinie |
|
Standard Prüfmethode zur Bestimmung des Flächengewichts von geosynthetischen Tondichtungsbahnen |
ASTM D 5993 |
|
Standard Prüfmethode zur Bestimmung des Kurzzeit ‐ Druckverhaltens von Geokunststoffen |
ASTM D 6364 |
|
Standard Prüfmethode zur Bestimmung des Stempeldurchdrückwiederstandes (CBR‐Versuch) |
ASTM D 6241 |
|
Standard test method for hydraulic bursting strength of textile fabrics- diaphragm bursting strength tester method |
ASTM D 3786 |
|
Standard Test Method for Hydrostastic Pressure |
ASTM D 5385/D5385M-93 |
|
Standard Test Method for Individual Geogrid Junction Strength |
ASTM D 7737/D7737M |
|
Standard Test Method for Permittivity of Geotextiles Under Load |
ASTM D 5493 |
|
Textil-Fördergurte für Schüttgüter (Prüfung) |
DIN 22102-2 |
|
Textilglas ‐ Bestimmung des Glühverlustes |
ISO 1887 |
|
Textilien ‐ Bestimmung der Zusammendrückbarkeit von Textilien und textilen Erzeugnissen |
DIN 53885 |
|
Textilien ‐ Garne von Aufmachungseinheiten ‐ Bestimmung der Höchstzugkraft und der Höchstzugkraftdehnung von Garnabschnitten unter Verwendung eines Prüfgeräts mit konstanter Verformungsgeschwindigkeit |
DIN EN ISO 2062 |
|
Textilien ‐ Prüfverfahren für Vliesstoffe ‐ Teil 4: Bestimmung der Weiterreißfestigkeit |
DIN EN ISO 9073-4 |
|
Textilien ‐Zugeigenschaften von textilen Flächengebilden – Teil 1: Bestimmung der Höchstzugkraft und Höchstzugkraftdehnung mit dem Streifenzugversuch |
DIN EN ISO 13934-1 |
|
Textilien; Bestimmung des Widerstandes gegen das Durchdringen von Wasser, Hydrostatischer Druckversuch |
DIN EN 20811 |
|
Textilien; Prüfverfahren für Vliesstoffe – Teil 1: Bestimmung der flächenbezogenen Masse |
DIN EN 29073-1 |
|
Textilien; Prüfverfahren für Vliesstoffe – Teil 3: Bestimmung der Höchstzugkraft und der Höchstzugkraftdehnung |
DIN EN 29073-3 |
|
Thermoplastische Rohre- Bestimmung der Ringsteifigkeit |
DIN EN ISO 9969 |
|
Umweltunbedenklichkeit |
FGSV M Geok E |
|
Untersuchung von Bodenproben ‐ Wassergehalt ‐ Teil 1: Bestimmung durch Ofentrocknung |
DIN 18121-1 |
|
Untersuchung von Bodenproben, Bestimmung des Wasserdurchlässigkeitsbeiwertes (Betonitmatte) |
DIN 18130-1 |
|
Verfahren zur Bestimmung Der Dichte von nicht verschäumten Kunststoffen Teil 1: Eintauchverfahren, Verfahren mit Flüssigkeitspyknometer und Titrationsverfahren |
DIN EN ISO 1183-1 |
|
Verfahren zur Untersuchung der Wurzelfestigkeit von Bahnen und Beschichtungen für Dachbegrünung |
FLL Methode |
|
Verstärkungserzeugnisse ‐ Bestimmung des Feuchtegehaltes |
DIN EN ISO 3344 |
|
Wärme‐ und feuchtetechnisches Verhalten von Baustoffen und Bauprodukten ‐ Bestimmung der Wasserdampfdurchlässigkeit |
DIN EN ISO 12572 |
|
Wärme‐ und feuchtetechnisches Verhalten von Baustoffen und Bauprodukten ‐ Bestimmung des Wasseraufnahmekoeffizienten bei teilweisem Eintauchen |
DIN EN ISO 15148 |
|
Wärmedämmstoffe für das Bauwesen ‐ Bestimmung der Dicke |
DIN EN 823 |
|
Wärmedämmstoffe für das Bauwesen ‐ Bestimmung der Dimensionsstabilität bei definierten Temperatur‐ und Feuchtebedingungen |
DIN EN 1604 |
|
Wärmedämmstoffe für das Bauwesen ‐ Bestimmung der Dimensionsstabilität im Normalklima (23 °C / 50 % relative Luftfeuchte) |
DIN EN 1603 |
|
Wärmedämmstoffe für das Bauwesen – Bestimmung der Ebenheit |
DIN EN 825 |
|
Wärmedämmstoffe für das Bauwesen ‐ Bestimmung der Länge und Breite |
DIN EN 822 |
|
Wärmedämmstoffe für das Bauwesen ‐ Bestimmung der Rechtwinkligkeit |
DIN EN 824 |
|
Wärmedämmstoffe für das Bauwesen ‐ Bestimmung der Rohdichte |
DIN EN 1602 |
|
Wärmedämmstoffe für das Bauwesen ‐ Bestimmung der Verformung bei definierter Druck‐ und Temperaturbeanspruchung |
DIN EN 1605 |
|
Wärmedämmstoffe für das Bauwesen ‐ Bestimmung der Wasseraufnahme bei kurzzeitigem teilweisem Eintauchen |
DIN EN 1609 |
|
Wärmedämmstoffe für das Bauwesen ‐ Bestimmung der Wasseraufnahme bei langzeitigem Eintauchen |
DIN EN 12087 |
|
Wärmedämmstoffe für das Bauwesen ‐ Bestimmung der Wasserdampfdurchlässigkeit |
DIN EN 12086 |
|
Wärmedämmstoffe für das Bauwesen ‐ Bestimmung der Zugfestigkeit senkrecht zur Plattenebene |
DIN EN 1607 |
|
Wärmedämmstoffe für das Bauwesen ‐ Bestimmung des Langzeit‐Kriechverhaltens bei Druckbeanspruchung |
DIN EN 1606 |
|
Wärmedämmstoffe für das Bauwesen ‐ Bestimmung des Verhaltens bei Druckbeanspruchung |
DIN EN 826 |
|
Wärmedämmstoffe für das Bauwesen ‐ Bestimmung des Verhaltens bei Frost‐Tau‐Wechselbeanspruchung |
DIN EN 12091 |
|
Wärmedämmstoffe für das Bauwesen ‐ Bestimmung des Verhaltens bei Scherbeanspruchung |
DIN EN 12090 |
|
Wärmetechnisches Verhalten von Gebäuden; Luftdurchläßigkeit von Bauteilen, Laborprüfverfahren |
DIN EN 12114 |
|
Width tolerance vs. Nominal |
ISO 4592 |
Textuurbepaling (lutumgehalte, leemgehalte en M50-cijfer).
Accredited: No
Capability | Description | Standard |
---|---|---|
NPR-CEN/TS 12390-9 | Het bepalen van de afschilfering bij vorst_x000d_ dooibestandheid._x000d_ CEN/TS 13290-9 describes the testing of the freeze-thaw scaling resistance of concrete both with water and with sodium chloride solution. It can be used either to compare new constituents or new concrete compositions against a constituent or a concrete composition that is known to give adequate performance in the local environment or to assess the test results against some absolute numerical values based on local experiences. Extrapolation of test results to assess different concretes, i.e. new constituents or new concrete compositions, requires an expert evaluation. There is no established correlation between the results obtained by the three test methods. All tests will clearly identify poor and good behaviour, but they differ in their assessment of marginal behaviour. The application of different acceptance limits for test results enables assessment for different degrees of exposure severity. In case of justified modifications of the test parameters, precautions might apply. Some alternative applications are described in Annex A. |
NPR-CEN/TS 12390-9 |
Beproevingsmethoden voor het bepalen van de laboratoriumreferentiedichtheid en het watergehalte - Proctorverdichting | This European Standard specifies test methods for the determination of the relationship between the water content and the dry density of hydraulically bound or unbound mixtures after compaction under specified test conditions using Proctor compaction. It allows an estimate of the mixture density that can be achieved on construction sites and provides a reference parameter for assessing the density of the compacted layer of the mixture. This European Standard applies only to unbound and hydraulically bound mixtures of aggregates used in road construction and civil engineering work. It is not applicable to soils for earthworks. The results of this test method can be used as a basis for comparing mixtures before use in road construction. The test results also allow a conclusion to be drawn as to the water content at which mixtures can be satisfactorily compacted in order to achieve a given dry density. This test is suitable for mixtures with different values of upper sieve (D) size up to 63 mm and an oversize up to 25 % by mass. |
NEN-EN 13286-2 |
Cur aanbeveling 20 | Bepalen van de hechtsterkte van mortels op beton. |
Cur aanbeveling 20 |
CUR Aanbevelingen 33 proef G | Het bepalen van de waterdoorlatendheid;_x000d_ gravimetrie_x000d_ |
CUR Aanbevelingen 33 proef G |
Methoden voor monsterneming | Bevat methoden voor het verkrijgen van monsters van toeslagmaterialen uit leveringen, bereidings- en verwerkingsinstallaties, inclusief voorraden. Het doel van de monsterneming is een verzamelmonster te verkrijgen dat representatief is voor de gemiddelde eigenschappen van de partij. De methoden die in deze norm worden gespecificeerd, zijn ook geschikt voor het verkrijgen van monstergrepen die afzonderlijk kunnen worden beproefd. Er wordt ook beschreven welke methoden voor monsterdeling kunnen worden gebruikt. De in deze norm beschreven methoden zijn alleen bruikbaar voor civieltechnische doeleinden. |
NEN-EN 932-1 |
NEN-EN 1015-10 | Bepaling van de droge volumieke massa van verharde mortel._x000d_ Specifies a method for determining the dry bulk density of hardenend mortars. It is applicable to lightweight and general purpose and thin layer mortars using specimens of regular shape. |
NEN-EN 1015-10 |
NEN-EN 1015-11 | Het bepalen van de buigtreksterkte en de_x000d_ druksterkte._x000d_ Specifies a method for determining the flexural and compressive strenght of moulded mortar specimens. |
NEN-EN 1015-11 |
NEN-EN 1097-1 | Het bepalen van de weerstand tegen_x000d_ afslijting (micro-Deval)._x000d_ This European Standard describes the reference method used for type testing and in case of dispute for determining the resistance to wear of coarse aggregates (main text) and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. The sample is normally tested in a wet condition, but the test may also be carried out in a dry condition. This European Standard applies to natural, manufactured or recycled aggregates used in building or civil engineering. |
NEN-EN 1097-1 |
NEN-EN 1097-2 | Het bepalen van de bestandheid tegen_x000d_ verbrijzeling._x000d_ This European Standard describes the reference method, the Los Angeles test, used for type testing and in case of dispute (and an alternative method, the impact test) for determining the resistance to fragmentation of coarse aggregates and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. This European Standard applies to natural, manufactured or recycled aggregates used in building and civil engineering. |
NEN-EN 1097-2 |
NEN-EN 1097-4 | Het bepalen van de holle ruimte;_x000d_ standaardverdichting._x000d_ This standard describes the reference method used for type testing and in cases of dispute, the determination of the voids of dry compacted filler by means of a Rigden apparatus. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. The test is applicable to natural and manufactured fillers. It is used, for example to determine their bitumen carrying capacity. |
NEN-EN 1097-4 |
NEN-EN 1097-5 | Het bepalen van het watergehalte._x000d_ This standard describes the reference method used for type testing and in cases of dispute for the determination of the water content of aggregates by drying in a ventilated oven. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 1097-5 |
NEN-EN 1097-6 art. 8, 9 | Het bepalen van de deeltjesdichtheid en_x000d_ wateropname._x000d_ Pyknometer method for aggregate particles passing the 31,5 mm test sieve and retained_x000d_ on the 4 mm test sieve._x000d_ Pyknometer method for aggregate particles passing the 4 mm test sieve and retained on_x000d_ the 0,063 mm test sieve |
NEN-EN 1097-6 |
NEN-EN 1097-7 | Het bepalen van de dichtheid._x000d_ This standard describes the reference method used for type testing and in cases of dispute for the determination of the particle density of filler by means of a pyknometer. |
NEN-EN 1097-7 |
NEN-EN 1097-8 | Het bepalen van de polijstwaarden_x000d_ (PSV)._x000d_ This Standard describes the reference method used for type testing and in cases of dispute for determining the polished stone value (PSV) of a coarse aggregate used in road surfacings. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. Annex A describes an optional method for the determination of the aggregate abrasion value (AAV). |
NEN-EN 1097-8 |
NEN-EN 12390-3 | Het bepalen van de druksterkte._x000d_ This European Standard specifies a method for the determination of the compressive strength of test specimens of hardened concrete. |
NEN-EN 12390-3 |
NEN-EN 12390-6 | Het bepalen van de splijttreksterkte;_x000d_ drukbelasting middels lijnlast._x000d_ This European Standard specifies a method for the determination of the tensile splitting strength of cylindrical test specimens of hardened concrete. A method using cubic or prismatic specimens is included in normative Annex A. |
NEN-EN 12390-6 |
NEN-EN 12390-7 | Het bepalen van de volumieke massa._x000d_ This European Standard specifies a method for determining the density of hardened concrete. It is applicable to lightweight, normal-weight and heavy-weight concrete. It differentiates between hardened concrete in the following states: 1) as-received; 2) water saturated; 3) oven-dried. The mass and volume of the specimen of hardened concrete are determined and the density calculated. |
NEN-EN 12390-7 |
NEN-EN 12697-1 | Gehalte aan oplosbaar bindmiddel._x000d_ This document describes test methods for the determination of the soluble binder content of samples of bituminous mixtures. The test methods described are suitable for quality control purposes during the production of plant mix and for checking compliance with a product specification. For the analysis of mixtures containing modified binders, the guidance of Annex D should be followed. |
NEN-EN 12697-1 |
NEN-EN 12697-11 | Het bepalen van de affiniteit tussen_x000d_ toeslagmateriaal en bitumen._x000d_ This European Standard specifies procedures for the determination of the affinity between aggregate and bitumen and its influence on the susceptibility of the combination to stripping. This property is intended to be of assistance to the designer for mixture design rather than as a type test. Susceptibility to stripping, as determined by these procedures, is an indirect measure of the power of a binder to adhere to various aggregates, or of various binders to adhere to a given aggregate. The procedures can also be used to evaluate the effect of moisture on a given aggregate-binder combination with or without adhesion agents including liquids, such as amines, and fillers, such as hydrated lime or cement. In the rolling bottle method, the affinity is expressed by visual registration of the degree of bitumen coverage on uncompacted bitumen-coated mineral aggregate particles after influence of mechanical stirring action in the presence of water. |
NEN-EN 12697-11 |
NEN-EN 12697-12 | Bepaling van de watergevoeligheid van bitumineuze proefstukken._x000d_ This European Standard describes three test methods for determining the effect of saturation and accelerated water conditioning. These methods can be used to evaluate the effect of moisture with or without anti-stripping additives including liquids, such as amines, and fillers, such as hydrated lime or cement: - method A uses the indirect tensile strength of cylindrical specimens of bituminous mixtures; - method B uses the compression strength of cylindrical specimens of bituminous mixtures; - method C defines the bonding value of soft asphalt mixtures 1 h after mixing, where the bonding of bitumen and aggregate can be equated to a bonding value. Method A and method B give the same result on average. However, if the slenderness of the specimens is less than 0,5, method B is not suitable. Method C is suitable for soft asphalt mixtures with bitumen of viscosity at 60 ºC of 4000 mm2/s or less, for which methods A and B are not suitable. |
NEN-EN 12697-12 |
NEN-EN 12697-2 | Bepaling van de deeltjesgrootteverdeling._x000d_ NEN-EN 12697-2 specifies a procedure for the determination of the particle size distribution of the aggregates of bituminous mixtures by sieving. The test is applicable to aggregates recovered after binder extraction in accordance with EN 12697-1 or EN 12697-39. The applicability of this European Standard is described in the product standards for bituminous mixtures. |
NEN-EN 12697-2 |
NEN-EN 12697-23 | Bepaling van de splijttreksterkte van bitumineuze proefstukken._x000d_ This European Standard specifies a test method for determining the (splitting) indirect tensile strength of cylindrical specimens of bituminous mixtures._x000d_ |
NEN-EN 12697-23 |
NEN-EN 12697-24 | Weerstand tegen vermoeiing._x000d_ This European Standard specifies the methods for characterising the fatigue of bituminous mixtures by alternative tests, including bending tests and direct and indirect tensile tests. The tests are performed on compacted bituminous material under a sinusoidal loading or other controlled loading, using different types of specimens and supports. The procedure is used to rank bituminous mixtures on the basis of resistance to fatigue, as a guide to relative performance in the pavement, to obtain data for estimating the structural behaviour in the road and to judge test data according to specifications for bituminous mixtures. Because this European Standard does not impose a particular type of testing device, the precise choice of the test conditions depends on the possibilities and the working range of the used device. For the choice of specific test conditions, the requirements of the product standards for bituminous mixtures need to be respected. The applicability of this document is described in the product standards for bituminous mixtures. Results obtained from different test methods or using different failure criteria are not assured to be comparable. |
NEN-EN 12697-24 |
NEN-EN 12697-25 | Cyclische drukproef._x000d_ NEN-EN 12697-25 specifies three test methods (A1, A2 and B) for determining the resistance of bituminous mixtures to permanent deformation by cyclic compression tests with confinement. The tests make it possible to rank various mixtures or to check on the acceptability of a given mixture. They do not allow making a quantitative prediction of rutting in the field to be made. Test methods A1 and A2 describe methods for determining the creep characteristics of bituminous mixtures by means of a uniaxial cyclic compression test with some confinement present. In this test a cylindrical test specimen is subjected to a cyclic axial stress. Method A2 is preferred for mastic asphalt and Method A1 for other asphalt mixtures. To achieve a certain confinement, the diameter of the loading platen is taken smaller than that of the test specimen. In test method A1, the test specimen is loaded by block-pulses whereas in method A2 haversine loading with rest time is applied. Test method B describes the method for determining the creep characteristics of bituminous mixtures by means of the triaxial cyclic compression test. In this test a cylindrical test specimen is subjected to a defined confining stress and a cyclic axial stress. This test is most often used for the purpose of evaluation and development of new types of mixtures. This European Standard applies to test specimens prepared in the laboratory or cored from the road. The maximum size of the aggregates is 32 mm. |
NEN-EN 12697-25 |
NEN-EN 12697-26 | Stugheid._x000d_ This European Standard specifies the methods for characterising the stiffness of bituminous mixtures by alternative tests, including bending tests and direct and indirect tensile tests. The tests are performed on compacted bituminous material under a sinusoidal loading or other controlled loading, using different types of specimens and supports. The procedure is used to rank bituminous mixtures on the basis of stiffness, as a guide to relative performance in the pavement, to obtain data for estimating the structural behaviour in the road and to judge test data according to specifications for bituminous mixtures. As this standard does not impose a particular type of testing device the precise choice of the test conditions depends on the possibilities and the working range of the used device. For the choice of specific test conditions, the requirements of the product standards for bituminous mixtures should be respected. The applicability of this document is described in the product standards for bituminous mixtures. |
NEN-EN 12697-26 |
NEN-EN 12697-36 art. 4.1 | Het bepalen van de laagdikte._x000d_ This European Standard describes two test methods for determining the thickness of a bituminous pavement. The first method describes measurements carried out on one or more cores which have been drilled from the full depth of the slab or road structure (destructive method). The second method electro-magnetic (non-destructive) measurement are used. |
NEN-EN 12697-36 |
NEN-EN 12697-5 procedure A | Het bepalen van de dichtheid van het_x000d_ mengsel zonder ingesloten lucht._x000d_ This European Standard specifies test methods for determining the maximum density of a bituminous mixture (voidless mass). It specifies a volumetric procedure, a hydrostatic procedure and a mathematical procedure. The test methods described are intended for use with loose bituminous materials containing paving grade bitumens, modified binders or other bituminous binders used for hot mix asphalt. The tests are suitable for both fresh or aged bituminous materials. |
NEN-EN 12697-5 |
NEN-EN 12697-6 procedure B en D | Het bepalen van dichtheid van het_x000d_ proefstuk met ingesloten lucht._x000d_ This European Standard describes test methods for determining the bulk density of a compacted bituminous specimen. The test methods are intended for use with laboratory compacted specimens or specimens from the pavement after placement and compacting, either by coring or sawing. This European Standard describes the following four procedures, the choice of which is used being dependent on the estimated content and accessibility of voids in the specimen: a) bulk density - dry (for specimens with a very closed surface); b) bulk density - saturated surface dry (SSD) (for specimens with a closed surface); c) bulk density - sealed specimen (for specimens with an open or coarse surface); d) bulk density by dimensions (for specimens with a regular surface and with geometric shapes, i.e. squares, rectangles, cylinders, etc.). |
NEN-EN 12697-6 |
NEN-EN 12697-8 art. 4 | Het bepalen van het gehalte aan poriën_x000d_ (holle ruimte) |
NEN-EN 12697-8 |
NEN-EN 12880, incl. BRL 1801 bijlage L | Het aantonen van schadelijke_x000d_ bestanddelen voor de reactie van cement_x000d_ met water en de aantasting van_x000d_ wapeningsstaal. |
NEN-EN 12880 |
NEN-EN 13036-4 | Oppervlak-eigenschappen van weg- en vliegveldverhardingen - Beproevingsmethoden - Deel 4: Methode voor de meting van de stroefheid van een oppervlak - De slingerproef._x000d_ This European standard describes a method for determining the slip/skid resistance of a surface using a device which remains stationary at the test location. The slip/skid resistance is measured by means of a pendulum arm. The method provides a measure of the slip/skid resistance properties of a surface either in the field or in the laboratory. This method measures the slip/skid resistance of a small area of a surface (approximately 0,01 m2). This should be considered when deciding its applicability to a surface which may have non-homogeneous surface characteristics, e.g. containing ridges or grooves, or is rough textured (exceeding 1,2 mm mean texture depth). |
NEN-EN 13036-4 |
NEN-EN 13179-2 | Het bepalen van het bitumengetal. |
NEN-EN 13179-2 |
NEN-EN 13286-47 en NEN-EN 14227-2 Annex D | Het bepalen van het draagvermogen;_x000d_ normale en verzwaarde C.B.R.-proef. |
NEN-EN 13286-47 |
NEN-EN 1338 | Betonstraatstenen._x000d_ This European Standard specifies materials, properties, requirements and test methods for unreinforced cement bound concrete paving blocks and complementary fittings. It is applicable to precast concrete paving blocks and complementary fittings for pedestrian use, vehicular use and roof coverings, e.g. footpaths, precincts, cycle tracks, car parks, roads, highways, industrial areas (including docks and harbours), aircraft pavements, bus stations, petrol filling stations. In case of regular use of studded tyres additional requirements are sometimes needed. This standard does not deal with the tactility or visibility of blocks nor with permeable blocks. This standard provides for the product marking and the evaluation of conformity of the product to this European Standard. |
NEN-EN 1338 |
NEN-EN 1338 Annex I | Het bepalen van stroefheid van betonstraatstenen._x000d_ |
NEN-EN 1338 |
NEN-EN 13383-2 | Waterbouwsteen._x000d_ Deze Europese norm specificeert de beproevingsmethoden voor natuurlijke, kunstmatige en gerecyclede toeslagmaterialen voor gebruik als waterbouwsteen. |
NEN-EN 13383-2 |
NEN-EN 1339 | Betontegels._x000d_ This European Standard specifies materials, properties, requirements and test methods for cement bound unreinforced concrete paving flags and complementary fittings. It is applicable to precast concrete paving flags and complementary fittings that are particularly for use in external trafficked paved areas and roof coverings. In case of regular use of studded tyres additional requirements are sometimes needed. This standard does not deal with the tactility or visibility of flags nor with permeable flags. This standard provides for the product marking and the evaluation of conformity of the product to this European Standard. |
NEN-EN 1339 |
NEN-EN 1339 Annex I | Het bepalen van stroefheid van betontegels. |
NEN-EN 1339 |
NEN-EN 1340 | Betonbanden._x000d_ This European Standard specifies materials, properties, requirements and test methods for unreinforced, cement bound precast concrete kerb units, channels and complementary fittings, that are for use in trafficked paved areas and roof coverings. The units are used to fulfil one or more of the following: Separation, physical or visual delineation, the provision of drainage or the containment of paved areas or other surfacing. In case of regular use of studded tyres, additional requirements are sometimes needed. This standard provides for the product marking and the evaluation of conformity of the product to this European standard. Apart from the tolerances, this standard does not include requirements for cross-sections, shapes and dimensions. This standard does not deal with the tactility or visibility of kerbs. |
NEN-EN 1340 |
NEN-EN 1340 Annex I | Het bepalen van stroefheid van betonbanden. |
NEN-EN 1340 |
NEN-EN 1367-1 | Het bepalen van de bestandheid tegen_x000d_ vriezen en dooien._x000d_ This European Standard specifies a test method which provides information on how an aggregate behaves when it is subjected to the cyclic action of freezing and thawing. |
NEN-EN 1367-1 |
NEN-EN 1367-2 | Het bepalen van de thermische_x000d_ eigenschappen en de bestandheid tegen_x000d_ verwering van toeslagmaterialen_x000d_ (magnesiumsulfaatproef)._x000d_ This European Standard describes the reference method used for type testing and in cases of dispute for assessing how an aggregate behaves when subjected to the cyclic action of immersion in magnesium sulfate, followed by oven drying. |
NEN-EN 1367-2 |
NEN-EN 1367-5 | Het bepalen van de weerstand tegen_x000d_ kortstondige verhitting._x000d_ This European Standard specifies methods for the determination of resistance to thermal shock of aggregates, subject to heating and drying in the production of hot bituminous mixtures. This standard describes the reference method use for type testing and in case of dispute. For the purpose of type testing and in case of dispute only the reference method should be used. |
NEN-EN 1367-5 |
NEN-EN 1426 | Bepaling van de naaldpenetratie._x000d_ NEN-EN 1426 specifies a method for determining the consistency of bitumen and bituminous binders. Normal procedure is described for penetrations up to (330 × 0,1) mm, but for penetrations above this value, up to (500 × 0,1) mm, different operating parameters are necessary. |
NEN-EN 1426 |
NEN-EN 1427 | Bepaling van het verwekingspunt - Ring- en kogelmethode._x000d_ NEN-EN 1427 specifies a method for the determination of the softening point of bitumen and bituminous binders in the range of 28 °C to 150 °C. Technical warning - The change from mercury thermometers to electronic temperature devices has revealed that the temperature definition in the mercury thermometer has not been precise enough to make a correct, unbiased transfer to electronic devices. Care should be taken for softening points ring and ball above 100 °C as the condition may have changed from previous practise to present days testing equipment. Below approx. 100 °C the difference in temperature readings between electronic and mercury stem thermometer is acceptable compared to the repeatability of this test methods. [Reference: ASTM E20 Group] |
NEN-EN 1427 |
NEN-EN 1436 Annex D | Het bepalen van stroefheid van wegmarkering. |
NEN-EN 1436 |
NEN-EN 1744-1 art 12 | Het bepalen van het gehalte aan in zuur_x000d_ oplosbare sulfaten._x000d_ Determination of acid soluble sulfates. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art. 7 | Het bepalen van het gehalte aan_x000d_ chloride._x000d_ Determination of water-soluble chloride salts using the Volhard method. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.11 | Het bepalen van het totale gehalte aan_x000d_ zwavel._x000d_ Determination of total sulfur content. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.14.1 | Het bepalen van het gehalte aan_x000d_ reactieve ijzersulfidedeeltjes._x000d_ Examination for the presence of reactive iron sulfide particles. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.14.2 | Het bepalen van het gehalte aan lichte_x000d_ stukken materiaal._x000d_ Determination of lightweight contaminators. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.15.1 | Het bepalen van het humusgehalte_x000d_ (natronloogproef)._x000d_ Determination of potential presence of humus. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.15.2 | Het bepalen van het gehalte aan_x000d_ fulvozuur._x000d_ Determination of fulvo acid content. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.16.2 | Het bepalen van de wateroplosbaarheid._x000d_ Determination of water solubility of filler. |
NEN-EN 1744-1 |
NEN-EN 1744-4 | Het bepalen van de watergevoeligheid._x000d_ This European Standard specifies the procedure for the determination of the water susceptibility of fillers for bituminous mixtures, by separation of filler from a bitumen filler mixture. A method for the determination of water susceptibility by volume increase and loss of stability of a Marshall specimen is described in Annex A. |
NEN-EN 1744-4 |
NEN-EN 196-1 | Het vervaardigen van mortelprisma’s en_x000d_ cementmortel en het bepalen van de_x000d_ druksterkte._x000d_ This part of EN 196 describes the method for the determination of the compressive and, optionally, the flexural strength of cement mortar. The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very short initial setting time. The method is used for assessing whether the compressive strength of cement is in conformity with its specification and for validation testing of a CEN Standard sand, EN 196-1, or alternative compaction equipment. This part of EN 196 describes the reference equipment and procedure and allows alternative compaction equipment and procedures to be used provided that they have been validated in accordance with the appropriate provisions in this document. In the event of a dispute, only the reference equipment and procedure are used. |
196-1 |
NEN-EN 196-2 (artikelen 4.4.1, 4.4.2, 4.4.3 en 4.5.16) | Determination of loss on ignition._x000d_ Determination of sulfate._x000d_ Determination of residue insoluble in hydrochloric acid and sodium carbonate._x000d_ Determination of chloride. |
NEN-EN 196-2 |
NEN-EN 196-2 art. 4.5.17 | Determination of carbon dioxide (reference method)._x000d_ Het bepalen van het_x000d_ koolstofdioxidegehalte |
NEN-EN 196-2 |
NEN-EN 196-3 | Bepaling van begin en einde van de binding en bepaling van de vormhoudendheid._x000d_ Het bepalen van de vormhoudendheid_x000d_ (proef van Le Chatelier._x000d_ NEN-EN 196-3 specifies the methods for determining standard consistence, setting times and soundness of cements. The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very short initial setting time. The method is used for assessing whether the setting time and soundness of a cement is in conformity with its specification. This part of EN 196 describes the reference methods and allows the use of alternative procedures and equipment, as indicated in notes, provided that they have been calibrated against the reference methods. In the event of a dispute, only the reference equipment and procedures are used. |
NEN-EN 196-3 |
NEN-EN 459-2 art. 5.8 | Available lime._x000d_ De bepaling van het beschikbare_x000d_ kalkgehalte. |
NEN-EN 459-2 |
NEN-EN 933-1 | Het bepalen van de_x000d_ korrelgrootteverdeling._x000d_ This European Standard describes the reference washing and dry sieving method used for type testing and in case of dispute, for determination of the particle size distribution of aggregates. For other purposes, in particular factory production control, other methods may be used, provided that an appropriate working relationship with the reference method has been established. It applies to all aggregates, including lightweight aggregates, up to 90 mm nominal size, but excluding filler. |
NEN-EN 933-1 |
NEN-EN 933-10 | Het bepalen van de korrelverdeling_x000d_ (luchtstraalzeefanalyse)._x000d_ This European Standard describes the reference method used for type testing and in cases of dispute for determining the particle size distribution up to 2 mm size of natural or manufactured origin filler aggregate using air jet sieving. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 933-10 |
NEN-EN 933-11 | Het bepalen van de samenstelling_x000d_ (classificatieproef)._x000d_ This European Standard describes a simple method for the examination of coarse recycled aggregates for the purpose of identifying and estimating the relative proportions of constituent materials. This reference test method should be used for type testing and in case of dispute. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 933-11 |
NEN-EN 933-3 | Het bepalen van de korrelvorm._x000d_ This European Standard describes the reference method, used for type testing and in case of dispute, for determination of the flakiness index of aggregates. For other purposes, in particular production control, other methods may be used, provided that an appropriate working relationship with the reference method has been established. This European Standard applies to natural, manufactured or recycled aggregates. The test procedure specified in this part of this European Standard is not applicable to particle sizes less than 4 mm or greater than 100 mm. |
NEN-EN 933-3 |
NEN-EN 933-5 | Het bepalen van het percentage aan_x000d_ gebroken oppervlakken._x000d_ Specifies a method for the determination of the percentage of particles with crushed and broken surface in a sample of natural coarse aggregate. It applies to gravel or mixed aggregate containing gravel. |
NEN-EN 933-5 |
NEN-EN 933-6 art. 8 | Het bepalen van de stroomcoëfficiënt._x000d_ NEN-EN 933-6 specifies the reference method used for type testing, and in case of dispute, for determining the flow coefficient of coarse and fine aggregates. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. Examples of advanced test methods can be found in the Bibliography. This European Standard applies to coarse aggregate of sizes between 4 mm and 20 mm and to fine aggregate of size up to 2 mm. |
NEN-EN 933-6 |
NEN-EN 933-7 | Het bepalen van het gehalte aan_x000d_ schelpen._x000d_ Specifies a method for the determination of shell content of coarse aggregates. It applies to gravel or mixed aggregate containing gravel. |
NEN-EN 933-7 |
NEN-EN 933-8 | Het bepalen van het gehalte aan fijn_x000d_ materiaal (zandequivalentproef)._x000d_ NEN-EN 933-8+A1 describes the reference method used for type testing and in case of dispute for the determination of the sand equivalent value of 0/2 mm fraction (for 0/4 mm, see Annex A) in fine aggregates or all-in aggregates. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 933-8 |
NEN-EN 933-9 | Het bepalen van het gehalte aan fijn_x000d_ materiaal (methyleenblauwproef)._x000d_ This standard describes the reference method used for type testing and in cases of dispute for the determination of the methylene blue value of the 0/2 mm fraction in fine aggregates or all-in aggregates (MB). It also describes the reference method for the determination of the methylene blue value of the 0/0,125 mm fraction (MBF) in Annex A. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the suitable reference method has been established. |
NEN-EN 933-9 |
proef 77.3 RAW 2015 | Het aantonen van PAK; DLC |
proef 77.3 RAW 2015 |
Proef 1 (RAW 2010; RAW 2015) | Het bepalen van de korrelverdeling (areometerproef) |
RAW proef 1 |
proef 10 (RAW 2010; RAW 2015) | Het bepalen van de éénpuntsproctor. |
RAW proef 10 |
proef 11 (RAW 2010; RAW 2015) | Het bepalen van de korrelverdeling. |
RAW proef 11 |
proef 13 (RAW 2010; RAW 2015) | Waterdoorlatendheid (normale proef) |
RAW proef 13 |
proef 14 (RAW 2010; RAW 2015) | Plasticiteit van grond. |
RAW proef 14 |
proef 15 (RAW 2010; RAW 2015) | Fijnheidsgetal. |
RAW proef 15 |
proef 18 (RAW 2010; RAW 2015) | Druksterkte van een uit een gebonden fundering geboorde cilinder. |
RAW proef 18 |
proef 19 (RAW 2010; RAW 2015) | Fulvozuurproef. |
RAW proef 19 |
proef 2 (RAW 2010; RAW 2015) | Het bepalen van het gehalte aan minerale deeltjes door zeef 63um. |
RAW proef 2 |
proef 20 (RAW 2010; RAW 2015) | pH-methode |
RAW proef 20 |
proef 28 (RAW 2010; RAW 2015) | Gloeiverlies, organische stof en CaCo3-gehalte. |
RAW proef 28 |
proef 28 (RAW 2010; RAW 2015) | Het bepalen van het gloeiverlies en het_x000d_ organische-stofgehalte |
RAW proef 28 |
proef 29 (RAW 2010; RAW 2015) | Textuurbepaling (lutumgehalte, leemgehalte en M50-cijfer). |
RAW proef 29 |
proef 3 (RAW 2010; RAW 2015) | Het bepalen van de verdichtingsgraad van aardebaan- of funderingsmateriaal. |
RAW proef 3 |
Proef 35 (RAW 2010; RAW 2015) | Het bepalen van het gehalte aan_x000d_ bestanddelen. |
RAW proef 35 |
proef 36 (RAW 2010; RAW 2015) | Gehalte aan organisch stof van grond. |
RAW proef 36 |
proef 37 (RAW 2010; RAW 2015) | Massaverlies bij zoutzuurbehandeling van grond. |
RAW proef 37 |
proef 38 (RAW 2010; RAW 2015) | Zoutgehalte van grond. |
RAW proef 38 |
Proef 53 (RAW 2010; RAW 2015) | Het bepalen van de laagdikte. |
RAW proef 53 |
proef 6 (RAW 2010; RAW 2015) | Het bepalen van de verdichting in situ;_x000d_ steekringmethode |
RAW proef 6 |
proef 64 (RAW 2010; RAW 2015) | Het bepalen van de laagdikte. |
RAW proef 64 |
proef 66 (RAW 2010; RAW 2015) | Het bepalen van de verdichtingsgraad. |
RAW proef 66 |
proef 67 (RAW 2010; RAW 2015) | Het bepalen van dichtheid van het_x000d_ proefstuk met ingesloten lucht |
RAW proef 67 |
proef 68 (RAW 2010; RAW 2015) | Het bepalen van de dichtheid van het_x000d_ mengsel zonder ingesloten lucht. |
RAW proef 68 |
proef 69 (RAW 2010; RAW 2015) | Het bepalen van het gehalte aan poriën_x000d_ (holle ruimte) |
RAW proef 69 |
proef 7 (RAW 2010; RAW 2015) | Het bepalen van dichtheid in situ;_x000d_ grindmethode |
RAW proef 7 |
proef 76 RAW 2000 | Het bepalen van stroefheid. |
RAW 2000 proef 76 |
proef 77.1 77.2 (RAW 2015) | Het aantonen van PAK (inclusief_x000d_ beschrijving van de constructieopbouw_x000d_ per gemeten laagdikte) |
RAW proef 77.1 77.2 |
Proef 79 (RAW 2010; RAW 2015) | Het bepalen van de dichtheid. |
RAW proef 79 |
proef 8 (RAW 2010; RAW 2015) | Het bepalen van de verdichting in situ;_x000d_ nucleaire methode. |
RAW proef 8 |
proef 9 (RAW 2010; RAW 2015) | Het bepalen van het verband tussen het vochtgehalte en de dichtheid (proctorproef) |
RAW proef 9 |